Copy files to USB devices with iPhone

Similar Questions

• Device not recognized USB message with iPhone 3g

  Here's the story from the beginning, I hope that I have provide sufficient detail.

  I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

  I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

  Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

  I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

  I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

  I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

  I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.

• Not able to copy files on USB drives.

  Original title: hp v165w USB Device

  I bought 2 separate USB flash drives to copy files to each of them seemed installs successfully but then when I want to copy or drag a file to it, my computer tells me no device doesn't exist and please insert a disc into drive F. But USB installed in drive E, Ive tried to do a shortcut for on mmy desktop USB and drag files into it, but it gives a red circle with a line through it, indicating that it is impossible. Please help me understand what to do!

  Hi mrsstacysmith,

  Thanks for posting in the Microsoft Community Forum. As you are not able to transfer data in USB drives, try these methods and check:

  Method 1:

  To verify that USB is causing the problem, try connecting a single USB key and then try to transfer the files from the computer and check if it works.

  Once you get the confirmation, try to connect to the second USB and try to transfer the files from the computer and check.

  If the second USB shows the same error as mentioned try connecting to another USB port and check.

  Method 2:

  Check if USB drives are detected in the Device Manager.

  a. click Start, Type Device Manager in the search box start and click on enter.

  b. expand Bus USB controllers and check if the device is detected.

  c. double-click the device and check if the device status says device is working properly.

  Also check if the USB drive is detected in disk management.

  a. click on Start, Type diskmgmt.msc in the start search box and click on enter.

  b. check if the USB is detected as a drive.

  Visit this link for more information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Error code 0 x 80070052 when copying files on USB

  Original title: code provided. what it means? __
  I tried to copy iPhone photos and video on a Store-And-GB USB disk. He gave me an Ox80070052 error code. I can't find anywhere on the web. Can you help me please?

  Hello

  What is the file system on your USB key?

  Check if it works on another computer.

  I suggest the first backup all data on the disk USB, then FormatLe drive to NTFS. This seems to have solved the problem for many users with the same issue.

  Follow these steps to format the USB.
  a. right click on the drive and select format.
  b. Select NTFS as the file system.
  c. Click Start to start the formatting process.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I see a white border to the right of my work plan displaying my file on a device with preview Adobe photoshop?

  I work on a Photoshop file with work plans, are all exactly the same width (as have been reproduced from the first). Overview of Adobe on my phone (iPhone 6) seems to make some of them with a white border to the right of the image. This means that I never see the file to the actual size, it will be on a device. Does anyone have ideas on this?

  We have fixed the following error: "files with 10 000 show px height a white extra area to the left or right in the Preview iOS app»  Please, download the last updated overview of the device to obtain the fix:

  Overview of unit November 2015 update available

  https://forums.Adobe.com/message/8248181

• "File Name Too Long" when copying files on USB using Windows 7 Home Premium (64-bit)

  When I copy about 60 GB of library files in a backup folder on a USB key, at the end of the copy, it is a dialog box indicating "file name too Long for the Destination Folder.  It shows that there are 62 records like that, and I can choose to ignore these files.

  1. I had formatted the USB stick to NTFS - which does not allow large file names?

  2. How can I see which files have this problem so I can shorten the file names?

  Thank you!

  Hello

  What is the capacity of the USB?

  Were you able to copy before?

  Try to format the drive once and then try and check if it is beneficial because it can also happen when there are viruses.

  You can also check the drive for errors.

  Here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  It will be useful.

• Cannot copy files from USB key!

  I have a picture of game size 4.17 GB. When I was trying to transfer it to my USB drive (16 GB), it displays message that the drive is full, so that only 8 KB was filled. I tried to copy another image of the game, but the same thing happened. Other files and songs, movies can be easily transferred but not game footage. Help, please!

  Pendrives are usually formatted in FAT32. FAT32 is limited to files under 4 GB. This is probably your problem.

• USB devices with the imaging IMAQdx driver

  Hi all

  I am new user of LabView,

  I want to receive the USB camera for this image, I installed imaq_USB_installer... Is that it is also possible with the IMAQdx driver?

  Can I compare and distinguish images through USB camera after the treatment?

  Thank you.

  Ashish,

  You don't want to use the imaq_usb installation program. It is obsolete and has never supported by NEITHER. All the functionality has been replaced by a feature in IMAQdx (part of the Acquisition of the Vision). It should work if your camera provides DirectShow drivers. You can download the latest Acquisition of Vision (2010.8 from this post) to try it here:

  http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

  If you want to perform any processing on the images by simply viewing/recording, you want Vision Development Module. You can try the version of 2010 here:

  http://Joule.NI.com/nidu/CDs/view/p/id/2125/lang/en

  Eric

• Need to boot from USB device with my Portege 7020ct

  Hello!

  I need help!

  situation: me and my girlfriend go on a long trip on Tuesday. We have to work, so we bought a second hand portege 7020ct.
  However, there is no CD or diskette drive. Win98 is installed but no drivers for the modem. infrared can locate other computers, but is not able to connect.
  so the rare thing I have is a usb connector.

  I want to install win2000 or at least put some data on the hard drive.

  So I need to use my external cd drive or usb key. the problem is, the system (usb port) find the external hard drive and the USB, but I need to install drivers to prepare! But how? --> no internet, no floppy drive, no internal cd, without infra-red...

  What can I do?

  I tried to get into the bios to see if it is possible to boot from the usb slot, maybe get the external drive runnin and then install win2000.
  but I can´t know how to get into the bios! .. .but I m don't know if it will work.

  How do I enter the bios?
  Anyone have any idea what I can do? How can I get drivers in the system?
  How can I get the disc runnin external or USB?

  Please, I beg you! I need help very quick, cause tomorrow is my last day...

  Thanks to everyone in advance
  Deko

  Hi Deko,

  The key in the power up takes you to the BIOS settings.

  Installing the drivers could be difficult. I have a 7010CT and there is no option to boot from USB (only floppy - HDD - CD - lan). I don't think that Windows 98 supports USB sticks without additional drivers. I upgraded from Windows 98 to Windows 2000 by using a PCMCIA cdrom external and from the installer of Windows 98. Maybe you could try to use a network card PCMCIA to try to find a disk for the Portege.

• Strange behavior AT200 - 101 USB OTG with all devices

  Hey,.
  I have an AT200-101 with an ICS 4.0 OS update and I can't get the USB hostmode working. After a lot of reading on the difference fine between the regualar (type B) USB connector and type A (called the OTG) I finally got the right adapter (it has a shape of recangular and ID - PIN is connected to the Earth).
  Now, whenever I plug in a device (massstorage key USB 3G modem) nothing happens except the watch AT200 suddenly * load * even if it is not connected to the charger or the externally connected device power is on.
  I tried these external USB devices with an other ICS Tablet (Zenithink) and they work fine.

  Andybody of the clues?

  Did some tests more: connect a USB mouse works fine as well plug my Sony NEX camera in mode masstorage... But all the other sticks are ignored... Only Toshiba sticks are recognized?

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.

• When you connect USB device, explore crash in Vista

  I have a slow USB device, with some of the big files on it. When I plug in and go on the drive in Explorer, the little light on the device starts flashing like crazy, and explore stops for a minute.

  There is a 12 MB file there, which takes about a minute to copy.

  I want to watch a 16 k file that takes seconds to copy.
  Is there a way to stop explore to copy all the contents of the disc on every time I look at the device?
  
  I disabled these services in efforts to alleviate this problem; Windows Search and Superfetch, ReadyBoost.
  
  Unfortunately, deleting the file is not an option. I'm willing to take a pretty big success in the overall performance to avoid wait a minute each time that I plug.
  
  I have windows vista ultimate SP2.
  
  Thanks in advance for your help
  
  Jack

  Hi JackNeuberry,

  • Is what type of device exactly?
  • The constructor has another driver who does not have this feature exhibit this behavior?

  See the Microsoft article below on how to manually enable or disable the write disk cache.

  HOW to: Manually enable/disable disk write caching

  http://support.Microsoft.com/kb/259716

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Satellite M60: USB devices do not work

  Hello...
  I have a Satellite M60 and all USB devices with microphone (webcam, VoIP phone) do not work.

  If someone could help with some suggestions, I would be grateful.

  Hello

  What do you mean by "not working"? The operating system recognizes external USB devices?
  Have you installed the drivers of these external USB devices?
  I also have a webcam and I had to install the drivers provided to use the device.

• Satellite A200: Cannot properly use external USB devices

  I encountered a problem with my Toshiba laptop and I can't fix it, and I'm in need your help please...
  The problem is that when I connect a USB portable device (an external hard drive, USB, iPod, Flash memory... etc) with more than 8 GB of memory...
  It is not properly installed in the Device Manager and appears under "USB bus controllers.

  But it does not say that it is an unknown device. It normally appears with his name, but he is not properly installed (it does not say that either) where it is supposed to be a camera under "imaging devices" in a specific category (hard drive under "drives"), and so on

  And I can't use the unit because the HARD disk does not appear in 'My computer' and my iPod cannot be used

  I would like to inform you that this problem is with all USB devices with more than 8 GB of memory.
  Not a single device. I tried a lot of features to ensure that it is not a problem with the unit.

  So this is a problem with my laptop and I installed Windows several times but no progress.
  Thanks for your help in advance...

  Is it XP or Vista?

  If its XP, make sure you have at least Service Pack 2.
  This hotfix can help XP see large capacity media:
  http://support.Microsoft.com/kb/934428
  but that doesn't really affect USB external HDD.

• Satellite A30-203 copy files to DVD

  Dear all

  I can copy anything onto a CD - RW but I can't transfer either on a DVD + Recordable What am I missing some important motivation.

  The hard drive I have is:-DVD/CD-RW drive (D :)

  Thank you much for the help
  Tandy

  Post edited by: tandy

  Hello

  How to copy files to DVD? With a burning program? Or windows? It would be useful to know what programs you use the copy of the files...

  Please give some information of your configuration.

  Greetings