No boot on Alienware M14x device

Similar Questions

• Alienware M14x windows 7 error driver install please help

  Hello I could really use some help... .i have an alienware M14x and his orginal OS is windows 7 Home premium 64-bit... .i got a virus reall bad so I was forced to do a clean install of windows 7 then when I boot my windows disc 7, happens to the page where you format your hard drive and choose the one you want to install windows 7 on it but no hardrives appear and a dialog box appears that says :

  "A required cd/dvd drive device driver is missing if you have a driver cd dvd or usb flash disk drive please insert it now.

  No, if the windows installation media is in the cd/dvd drive you can delete safely for this step.

  If you could help me please id really appreciate it

  and btw im using is not my CD-ROM drive Moose who was a seagate drive 500 GB 7200 RPM, but the drive went bad so now im using a HGST 500 GB 5400 RPM hardrive idk if it matters or not

  specifications of the system for M14x

  Intel core i7-2360qm 4 core 2.00ghz

  8 GB ddr3 1600 mhz

  HGST 5400 RPM 500 GB

  Intel HD graphics 3000

  Thanks for looking it would really help me if you have ideas

  The USB ports on the left side of the laptop are USB3 and does not let you install Windows from a USB device on them.

  Simplest answer is to use the ports on the right side are the USB 2.0 standard. It's really as simple as that!

• Portege A100 PPA10A - update the BIOS to boot from a USB device

  Hello

  I have an old Portege A100, model: PPA10A-0002LP, but I can't seem to find this model on any Web site of Toshiba, closest I've seen is the "PPA10A - 0002 L'.

  I am wanting to know if there is a BIOS update that will allow me to boot from a USB device.

  The question I have is that I need to reinstall Windows, but the CD ROm cannot read disks.
  This network PXE boot, but I'm new to this sort of thing and have absolutely no idea what to do here.

  Any help would be great,

  Thank you

  Hello

  Portege A100 seems to be developed solely for the Australian market.
  As you say it is a model number Portege A100 PPA10A - 0002L listed on the Australian page of Toshiba Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A
  So in my opinion, the BIOS should work too.

  Anyway, I doubt that the BIOS update will add boot options.

  Usually the BIOS supports booting from CD/DVD drive, drive HARD, LAN and USB FDD.
  It should be possible to boot from a boot disk using a USB FDD drive.
  I doubt you'd be able to boot from USB WEIRD since this Portege A100 supports an internal CD/DVD drive.

• SSD for Alienware M14x R2

  Hello! I have a question about the Alienware M14x R2 product. Is the Msata SSD Plextor M5M 256 MB will dimensionally capable and compatible with the system?

  Hi Erqe,

  Plextor M5M 256 MB mSATA SSD fits the dimensions and is compatible with the system as it is similar the drive displayed below.

  

• VGA graphics card cannot start (Code 10) on Alienware M14x

  Recently, I deleted from my hard drive and reinstalled Windows 7 and now all my games (COD Black Ops, FSX, etc.) and other programs such as Google Earth are Mid-use freezing and I have to force to leave them via the Task Manager. There is a sign of warning next to the VGA adapter in the currency manager and I can not find suitable driver to install it with. This driver to I use to install the VGA graphic card? I tried everything from my M14x Resource CD to Microsoft and Dell downloads.

  System Specs:
  Alienware M14x R1 64-bit
  Windows 7 Home Premium
  Intel Core i5 - 2.40 GHz
  Intel HD Graphics 3000
  8 GB RAM
  750 GB hard drive
  Any suggestions?

  You are probably running on the integrated graphics card Intel HD3000.

  Generally drivers for laptop are all downloaded from the web site of the mfg, but sometimes drivers for graphics dedicated on laptops are downloaded from the mfg cards.

  I see that the four existing variants of the M14X using Nvidia GT650m, so if DELL does not include drivers for this card then use the Nvidia download below-
  Note that your M14X may use a different graphics card, so check that you have.

  NVIDIA Driver Downloads - advanced search

  No matter what the pilots are on the CD, you should check for newer versions
  on the DELL site, as the drivers on the CD are almost always up-to-date.

  If you have not done yet also get updates of Windows, but don't forget to
  block the updates of Windows to download and install the drivers.

  Also update DirectX - Download Details: DirectX end-user performance

  .

• Alienware M14x R2 Ram speed

  Would it not possible to change the BIOS to allow faster than 1600 mhz ram installation? If so, how would I go all this on my laptop of special running Windows x 64 Pro 10? Thanks to everyone for their help!

  Hello

  The highest speed of ram that can support the Alienware M14X R2 is 1600 MHz. We do not recommend set the Bios to operate with greater speed of the ram, which would likely cause the system to crash.

• Alienware m14x R2 no signal through HDMI

  Hello. He machine Alienware m14x R2 i7-3630QM GTX 650 M. Faced with this problem:
  When you connect an external monitor via HDMI, there is no image, while sound is transmitted and the monitor is determined by the system pulls the native resolution in the display properties, but there is no picture. I've tried different monitors, different painkillers to reinstall the driver. I asked as the site of the factory in DELL in accordance with service number and all the news on the Nvidia site. Just do rekaveri. I change the monitor and in the display properties settings. The result is the same. At the same time connected via mini DP image is transmitted normally.

  Please help me :(

  I will recommend you to completely uninstall the video drivers and install the latest version from the Dell support site, the monitors as well on a no duplicated extended connection.

  Have you tried with another HDMI cable?

• Alienware m14x colapses R2 (Control Panel of Sound Blaster, AlienRespawn and IAStorIcon)

  Hello everyone,

  Just a few hours by my Alienware m14x R2 seems colapsing.

  I bought in September 2012 and the system worked very well since... I didn't do any system of Respawn (the application of restoration of the integrated plant) for almost two years and a half!

  A few minutes ago I was using my Alienware as I always do: nothing else, except for updating TeamViewer version 9 to 10 (I honestly don't think that could crash my system like this) and the automatic update of the Dell SupportAssist software (Besides, I don't like this program at all).

  Then, I just turned off my laptop and half an hour after that, I start getting an avalanche of mistakes whenever I start Windows. The screenshot below shows what I always, whenever I start Windows:

  

  I already tried to return the system to a previous time in the past (using the Windows tool), but it was not successful (and he really SAID that he was not successful).

  What am I supposed to do? Someone knows something similar after the update to the latest version of Dell SupportAssist?

  Thank you in advance.

  Because of all the errors that you have found my best recommendation will be to reinstall windows, but you can try to update the framework to see if you are able to correct the error of the Intel Rapid Storage Technology technology.

• keyboard replacement for old keyboard for Alienware M14x R1 R2

  Hello

  recently, my old keyboard on my Alienware M14x died and I had to buy a replacement. not knowing about two different types of keyboards (or maybe even three), I bought the keyboard instead of R1 R2. Thus, for keys (a, s, d and e) do not work. It is anyway possible to have the keyboard does work (maybe to install drivers or reprogram a chip)? the alternative is to get the correct keyboard, which will cost money and time. Thanks for any help.

  r.

  Unfortunately there are no drivers that can make the keyboard to work. I will recommend you to sell one and try to get one for the M14XR1.

• Alienware M14X R2 Ram Type

  After looking around on the internet for 16 GB of ram for alirnware M14X R2 for about 12 hours (no joke). I'm looking for ram to my laptop.i I was wondering if anyone could tell me what kind of ram it uses PS im no noob if opend the computer to the top and cheked but he said was pc3-12800

  Hi sach1888,

  Alienware M14x R2 has two sockets DDR3 accessible internally that have speeds up to 1600 MHz, DDR3 modules double channel and a maximum memory of 16 GB.

  The above requirements must be verified to a memory module.

  If you have any other questions answer the same mission.

• Alienware m14x R1 upgrade

  Anyone know if I could swap out the motherboard of R1 and put in a card mother R2? I can say that cases are identical. The biggest thing I'm not sure if the R2 motherboard supports the processor of my R1. Thoughts?

  If anyone is curious, I found this:

  http://Forum.techinferno.com/Alienware-M14x-AW-14/6292-%5Bupgrade%5d-M14x-R1-R2.html

  So it is possible, that you just need the heatsink to a R2 so

• Alienware M14x R2 boot problems

  I'll just cut to the Chase.

  From the start, my laptop gives me the following message is displayed:

  Check the connection of the cable.

  PXE = MOF Exitting Intel PXE ROM

  NO device found Boot

  I ran the diagnostic, and it reported a "sound machine".

  Edit: Called customer service and the need to have the hard drive replaced.

  Means generally he does not find a disk bootable hard (with Windows installed correctly)... so he's trying to boot from the network instead.

• No boot after factory reset device

  Hello dear forum members.

  I have a problem with my Satellite L50D-B-15Z p/n: psule.

  So I decided to return to the original factory condition. After that he finished recovery, I pressed the finish. The laptop is turn off by itself and not restarted. So I pressed the power button and a massage popped up on the screen and no boot device. In the bios the drive hard toshiba is present, secureboot is activated.

  Any suggestion?

  I guess you choose bad option and I think the whole HARD disk is now deleted. I guess also that you did not create recovery media, right?

  In any case, what you can do now is to order the original recovery media and install original recovery image designed for your laptop model.
  You can do it on https://backupmedia.toshiba.eu/landing.aspx

• Satellite L40-139 can boot from a USB device?

  Hello

  I have a new L40-139. Looking through the BIOS I can't find an option to boot from a device USB like a USB HDD or USB flash drive. Could someone confirm if the L40-139 can boot from USB and is thus the configuration of the BIOS for this.

  If she can not someone knows if there are plans for a BIOS update that would allow this?

  I must admit that, although I love the L40, I am disappointed how to limit the BIOS is.

  Thank you

  R

  Hello

  I'm not 100% sure, but as far as I know, you cannot use USB HDD as first boot device. USB floppy Yes, but with external HARD disk drive, it won't work.

• Satellite 1800-804: how to boot from a USB device?

  I have a 1800-804 satellite and I would like to know how to start Notepad from a usb device.

  Hello

  If you want to boot from the external HARD disk or USB stick key this option is not possible.