No bounding box using the drawinmg object.

Hello

To animate a CC, I find that if I draw a circle with the Oval tool in object drawing Mode, there is no encompassing visible around the object.

My understanding is that a bounding box should appear around objects in Object Drawing Mode.

Can someone explain this? I use a wacom with OSX 10.11.2 stylus

Thank you.

It is a change with the new version. Limits will be consistent with the actual shape of the object to place the rectangular outline that you are used to seeing.

Tags: Adobe Animate

Similar Questions

How to get the bounding box of the text element boundaries.

Hi all
I try to get the boundaries of the bounding box of the text of paragraph element. I found the following link,
the coordinate of a bounding box is the same as the coordinates of the layer?
But the solution does not work for me. It is for me as the layer of destination each time that is the limits of the actual text.
Can someone have an idea how to do this?
Thank you.

Ok.. Looks like these settings that if the upper line of fonts is calculated from the highest point of the highest glyph or above the normal uppercase and can go above this. What is it changes by the police? And if the exchange difference, the bottom of the bounding box moves it or increase the height?

Discover the values limits-descriptor, especially 'top '. I think that it used to have small values of values that could be the delta of the value of the position. Note that there might be the scaling issue that I explained earlier

Var ref = new ActionReference()

ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"))

var action = executeActionGet (ref)

var textKey = action.getObjectValue (stringIDToTypeID ('textKey'))

var limit = textKey.getObjectValue (stringIDToTypeID ('bounds'))

Top Var = bounds.getUnitDoubleValue (stringIDToTypeID ('top'))

var left = bounds.getUnitDoubleValue (stringIDToTypeID ('left'))

The Central handle on the rectangle isn't gone when I select with the black arrow (v) tool. See the bounding box and the edges is both. Dd intermediate anchor to go?

The Central handle on the rectangle isn't gone when I select with the black arrow (v) tool. See the bounding box and the edges is both. Dd intermediate anchor to go?

haggyabeken,

I'm afraid that you have come across the Rectangle Live bug, which is limited to MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.

https://forums.Adobe.com/thread/1595973

Thus, a switch for the Mavericks with a reinstall might be the way to solve it here and now.

To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool.

A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

https://forums.Adobe.com/thread/1587587

the coordinate of a bounding box is the same as the coordinates of the layer?

Hello, everyone,
I create a layer of text and got of the boundaries of the layer. And then on this layer, I created a bounding box in certain subjects, now I am confused if the coordinates of the bounding box are the same as the boundaries of the layer? Is this good or even there is no coordinate on the framework encompassing?
Or if it's an error how can I get the coordinates of the bounding box.
Thank you!

You must use the textItem.position IE:

Left = activeDocument.activeLayer.textItem.position [0];

Top = activeDocument.activeLayer.textItem.position [1];

How to use the Credential object?

I had an obligation to create a password confirmation form in vCO. I detailed what I came here:
http://www.jonathanmedd.NET/2015/01/presenting-a-password-confirmation-form-in-VCO-VRO.html
It has been suggested in the comments that:
"A better solution would be to use an entry of type 'credential' (which includes natively password confirmation checking)."
Although the credential object solves the problem of the confirmation of the password very well, she introduced a new show that I fight to manipulate its contents when you work in the workflow using as input.
I tried to use the credentials object once before, but he had problems with the password property. Once the workflow, the password property is not currently available. The API Explorer for the password property indicates "[obsolete] passwords are not available in the script". For example, I want to use the credentials with the "Execution of the Guest program" workflow, I need to provide a username (String) and the password (SecureString), but just picking on the properties username and password of the credentials object does not. I can confirm in the workflow using the method checkPassword that the password matches a known value. However, when you try to use the password property and assign a different workflow requiring password authentication always fails.
Does anyone have examples of use of the object of identification information on the work plan with the password in the workflow in script tasks or other work streams?
Thank you :-)

I didn't know that this was the case.

It was definitely a fix to avoid someone making a server.getCredential () in a workflow to steal user passwords.

If the credential object can only serve to set methods taking as parameter.

Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear? any help would be greatly appreciated.

Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear? any help would be greatly appreciated.

You will need to find a forum for MS Word, since it is the software you are trying to manipulate in the present. If you think that the treatment/creation of the PDF file plays a role, then you should ask in the forum for the software that you use to create the PDF file.

This forum is for a question about downloading and installing Adobe products test, so in all circumstances, your question does not fit in this forum.

check box use the temporary Interface as a derived Table
Hello
in some guides and oracle websits, they want to check the box use the temporary Interface as a derived Table (Sub-Select).
but the topology and datastor KM or target, I can't click on it...
is - anyone know why? what setting I need to change?

reason
I want to create a temporary interface to use as a source.
MySQL-> temp. interface-> join oracle of temp table. interface.

Thank you..
Michael
Hi michael,.

When you create a temporary interface, an interface in which the target data store does not exist, you can then use this temporary interface as a source in a different interface. Once you add the temp as a source interface on the mapping tab, select the temporary interface. You should see the check box in the Properties window of the Source to 'Use the temporary Interface as a Derived Table (Sub-Select)'. To use the code integrated into the interface of temp, check this box. The code will then be added as a subselect for this interface.

See this post for more details: http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/

Enjoy!
Michael R.

How to enter text in the text entry box using the virtual keyboard in a flex application

Re: How to enter text in the text entry box using the virtual keyboard in a flex application
Hello
I'm using flash builder 4.
I designed the virtual keyboard, I have to update the text in the input text permanently area using the virtual keyboard.
I used the events.i button does a few he's cheating.
can someone help me tat.
Thanks in advance.
I have included my mxml with this program.
virtualKeyboard. MXML
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = minHeight = "955" "600" creationComplete = "initfunc ()" >
< fx:Script >
<! [CDATA]
Import mx.controls.Alert;
private function initfunc (): void
{
B1.addEventListener (MouseEvent.Click, HandleEvent);
B2.addEventListener (MouseEvent.Click, HandleEvent);
B3.addEventListener (MouseEvent.Click, HandleEvent);
B4.addEventListener (MouseEvent.Click, HandleEvent);
B5.addEventListener (MouseEvent.Click, HandleEvent);
B6.addEventListener (MouseEvent.Click, HandleEvent);
B7.addEventListener (MouseEvent.Click, HandleEvent);
B8.addEventListener (MouseEvent.Click, HandleEvent);
B9.addEventListener (MouseEvent.Click, HandleEvent);
B10.addEventListener (MouseEvent.Click, HandleEvent);
B11.addEventListener (MouseEvent.Click, HandleEvent);
B12.addEventListener (MouseEvent.Click, HandleEvent);
B13.addEventListener (MouseEvent.Click, HandleEvent);
B14.addEventListener (MouseEvent.Click, HandleEvent);
B15.addEventListener (MouseEvent.Click, HandleEvent);
B16.addEventListener (MouseEvent.Click, HandleEvent);
B17.addEventListener (MouseEvent.Click, HandleEvent);
B18.addEventListener (MouseEvent.Click, HandleEvent);
B19.addEventListener (MouseEvent.Click, HandleEvent);

B20.addEventListener (MouseEvent.Click, HandleEvent);
B21.addEventListener (MouseEvent.Click, HandleEvent);
B22.addEventListener (MouseEvent.Click, HandleEvent);
B23.addEventListener (MouseEvent.Click, HandleEvent);
B24.addEventListener (MouseEvent.Click, HandleEvent);
B25.addEventListener (MouseEvent.Click, HandleEvent);
B26.addEventListener (MouseEvent.Click, HandleEvent);
B27.addEventListener (MouseEvent.Click, HandleEvent);
B28.addEventListener (MouseEvent.Click, HandleEvent);
B29.addEventListener (MouseEvent.Click, HandleEvent);
B30.addEventListener (MouseEvent.Click, HandleEvent);
B31.addEventListener (MouseEvent.Click, HandleEvent);
B32.addEventListener (MouseEvent.Click, HandleEvent);
B33.addEventListener (MouseEvent.Click, HandleEvent);
B34.addEventListener (MouseEvent.Click, HandleEvent);
B35.addEventListener (MouseEvent.Click, HandleEvent);
B36.addEventListener (MouseEvent.Click, HandleEvent);
B37.addEventListener (MouseEvent.Click, HandleEvent);
B38.addEventListener (MouseEvent.Click, HandleEvent);
B39.addEventListener (MouseEvent.Click, HandleEvent);
B40.addEventListener (MouseEvent.Click, HandleEvent);
B41.addEventListener (MouseEvent.Click, HandleEvent);
B42.addEventListener (MouseEvent.Click, HandleEvent);
B43.addEventListener (MouseEvent.Click, HandleEvent);
B44.addEventListener (MouseEvent.Click, HandleEvent);
B45.addEventListener (MouseEvent.Click, HandleEvent);
B46.addEventListener (MouseEvent.Click, HandleEvent);
B47.addEventListener (MouseEvent.Click, HandleEvent);
B48.addEventListener (MouseEvent.Click, HandleEvent);
B49.addEventListener (MouseEvent.Click, HandleEvent);
B50.addEventListener (MouseEvent.Click, HandleEvent);
B51.addEventListener (MouseEvent.Click, HandleEvent);
B52.addEventListener (MouseEvent.Click, HandleEvent);
B53.addEventListener (MouseEvent.Click, HandleEvent);

}
public void handleEvent (e: MouseEvent): void
{
var a: String = e.target.name;
Alert.Show (e.Target.Name);
var b:String = null;
Switch (a)
{

case 'Button20 ':
b = TextBox.Text;
TextBox.Text = "a";
TextBox.Text = b + "a";
break;

case 'Button21 ':

TextBox.Text = "b";
TextBox.Text = b + "b";
break;

by default:

TextBox.Text = "s";
TextBox.Text = b + "s";
}
}

[]] >
< / fx:Script >

< s:Panel = "43" x y = "82" width = "527" height = "213" >
< mx:Button = "71" x y = '86' id = "b1" label = "1" width = "30" height = "24" / >
< s:Button = "180" x y = '86' id = "b2" label = "5" width = "30" height = "24" / >
< s:Button = "127" x y = '86' id = "b3" label = "3" width = "30" height = "24" / >
< s:Button = "99" x y = '86' id = "b4" label = "2" width = "30" height = "24" / >
< s:Button = "323" x y = '86' id = "b5" label = "0" width = "30" height = "24" / >
< s:Button = "294" x y = '86' id = "b6" label = "9" width = "30" height = "24" / >
< s:Button = "265" x y = '86' id = "b7" label = "8" width = "30" height = "24" / >
< s:Button x = '237' y = '86' id = "b8" label = "7" width = "30" height = "24" / >
< s:Button = '209' x y = '86' id = "b9" label = "6" width = "30" height = "24" / >
< s:Button = "42" x y = '86' id = "b10" label = "" ' "width ="30"height ="24"/ >"
< s:Button x = "382" y = '86' id = "b11" label = "=" width = "30" height = "24" / >
< s:Button = '353' x y = '86' id = "b12" label = "» largeur" width = "30" height = "24" / > "
< s:Button = "410" x y = '86' id = "b13" label = "back" width = "76" height = "24" / >
< s:Button = "157" x y = '86' id = "b14" label = "4" width = "30" height = "24" / >
< s:Button = "43" x = "109" id = "b15" label = "tab" width = "66" height = "24" / >
< s:Button = "105" x = "109" id = "b16" label = "q" width = "31" height = "24" / >
< s:Button = "247" x = "109" id = "b17" label = "y" width = "30" height = "24" / >
< s:Button '303' = x y = "109" id = "b18" label = "i" width = "31" height = "24" / >
< s:Button = "361" x y = '110' id = "b19" label = "p" width = "34" height = "23" / >
< s:Button = "394" x = "109" id = "b20" label = "[" width = "31" height = "24" / >] "
< s:Button = "191" x = "109" id = "b21" label = "r" width = "34" height = "24" / >
< s:Button '424' = x y = "109" id = "b22" label = "]" width = "31" height = "24" / > "
< s:Button = "222" x = "109" id = "b23" label = "t" width = "31" height = "24" / >
< s:Button = "161" x = "109" id = "b24" label = "e" width = "31" height = "24" / >
< s:Button = "133" x = "109" id = "b25" label = "w" width = "31" height = "24" / >
< s:Button = "332" x = "109" id = "b26" label = "o" width = "31" height = "24" / >
< s:Button = "275" x = "109" id = "b27" label = "u" width = "31" height = "24" / >
< s:Button = "220" x = "133" id = "b28" label = "g" width = "31" height = "24" / >
< s:Button '424' = x y = "132" id = "b29" label = "enter" width = "62" height = "24" / >
< s:Button = "43" x = "132" id = "b30" label = "caps" width = "66" height = "24" / >
< s:Button = "275" x = "133" id = "b31" label = "j" width = "42" height = "23" / >
< s:Button = "314" x = "132" id = "b32" label = "k" width = "31" height = "24" / >
< s:Button = "133" x = "133" id = "b33" label = "s" width = "31" height = "23" / >
< s:Button = "161" x = "133" id = "b34" label = "d" width = "31" height = "23" / >
< s:Button = "250" x = "133" id = "b35" label = "h" width = "31" height = "23" / >
< s:Button = "105" x = "133" id = "b36" label = "a" width = "31" height = "23" / >
< s:Button = "191" x = "133" id = "b37" label = "f" width = "31" height = "23" / >
< s:Button = "342" x = "132" id = "b38" label = "l" width = "31" height = "24" / >
< s:Button = "152" x = "154" id = "b39" label = "x" width = "31" height = "24" / >
< s:Button = "353" x = "154" id = "b40" label = "'." " Width = "31" height = "24" / >
< s:Button = "325" x y = "154" id = "b41" label = "," width = "31" height = "24" / >
< s:Button = "294" x = "154" id = "b42" label = "m" width = "31" height = "24" / >
< s:Button = "259" x = "154" id = "b43" label = "n" width = "37" height = "24" / >
< s:Button = '236' x y = "154" id = "b44" label = "b" width = "31" height = "24" / >
< s:Button = "211" x = "154" id = "b45" label = "v" width = "31" height = "24" / >
< s:Button = "181" x = "154" id = "b46" label = "c" width = "31" height = "24" / >
< s:Button = "122" x = "154" id = "b47" label = "z" width = "31" height = "24" / >
< s:Button = "380" x = "154" id = "b48" label = "/" width = "31" height = "24" / >
< s:Button '368' = x y = "132" id = "b49" label width = ';' = "31" height = "24" / >
< s:Button = "396" x = "132" id = "b50" label = "" ' "width ="31"height ="24"/ >"
< s:Button = "43" x = "154" id = "b51" label = "shift" width = "82" height = "24" / >
< s:Button '407' = x y = id = "154" "b52" label = "shift" width = "79" height = "24" / >
< s:Button = "455" x = "109" id = "b53" label = "------" width = "31" height = "24" / >
< / s:Panel >
< s:TextInput = "161" x = "27" id = "textbox" width = "253" / >
< / s:Application >
Kind regards
Saran r

Hello

http://gumbo.flashhub.NET/keyboard/

It is a small example of a 'virtual' keyboard that will enter the text into a textinput/textarea component selected. Capslock and shift key States really aren't quite right (really need control shift/cap lock combo), but there is a simple tab and backspace (delete) and enter the function key.

hope this is useful

David.

using the JavaScript object and flow

Two problems:
Problem 1
I'm trying to understand the best way to manage a service on the attached form (the form is under construction and messy!).
There is a requirement to attach files to the form. I have it understood, but would like to cope better. There are about 8 places to attach files, and each time I move things around I need to change the code for each button, so I think that function in a script object implementation is the way to go (let me know if there is a better way!).
I think I've learned how to work the script objects, but have not tried this although there are has a few pieces I could not understand yet.
The way it works now, it's you click on the button to fixation, attach a file and the file name is entered in the field surrounding the button - there is a separate field around each button (see subform "subProjectInfo.subAttach" on page 2). What I can't understand, it is if I put this in a function/script object, how do I get the name of the file in the appropriate box? I have to return the data back to the button, I guess, which can then fill in the field?

Problem 2
At the bottom of the same page (2) is a subform (subProjectInfo.subMilestones) with a table in full expansion. I followed the example in the purchase order example, but I can't get the headers to repeat correctly. When it breaks to a new page, the header above is repeated whenever a row is added.
Extra bonus question!
I hope one of you more knowledgeable guys can take a look at the structure of the form and let me know what it feels like to a 'best practices' point of view - use of subforms, that sort of thing. I use a lot of subforms to wrap things and have been wondering about the performance, that kind of thing. This is the most complex form, I've done so far and want to make sure that I'm going down the correct road!

Hi Jono,

Hopefully, I've solved your problem 2, I deleted simoly repeat for each item in the MilestoneHeader.GeaderRow [0]. And now it is only repeated for new pages.

When I have time, I'll try to check your problem 1.

ARO

Paul Butenko

bounding box for the point and RADIUS
I use google maps and WGS 84 (4326).

I try to get the bounding box that contains a circle of a given radius in miles starting at a given lat/lon.

I saw SDO_GEOM. SDO_MBR, but I wasn't sure how to make the circle (or at least get points m miles to the North, South, East and West from a point given)
Hello

You can use the buffer feature (and don't be embarrassed to build the circle yourself) on the bridge and then take the MBR of this result.

SDO_GEOM. SDO_MBR (SDO_GEOM. SDO_BUFFER (your_point, your_radius, your_tolerance, 'unit = mile'))

so, it would become;

Select SDO_GEOM. () SDO_MBR
SDO_GEOM. () SDO_BUFFER
SDO_GEOMETRY (2001,8307, SDO_POINT (your_lon, your_lat, NULL), NULL, NULL);
(("your_radius, your_tolerance, ' unit = mile")) of the double

SRID can be 8307 or 4326

Luke

Published by: Luc Van Linden on September 25, 2009 09:01

How to use the data object 'DatastoreHostMount '.

I train to iterate on the grouping value in vCenter and for each data store found, determine whether a host has mounted data store or if it is visible to the host. I am using data object 'DatastoreHostMount' , but I don't know exactly how to use the object to retrieve the name of host configuration.
Here's the perl code snippet and I get an error for:
```
#get all hosts within cluster and check the connectionState and compare with all datastores found
#is there a more efficient way to combine this section with the next section?

        my $hosts = Vim::get_views (mo_ref_array => $cluster->host);

        foreach my $host (@$hosts) {
                if ($host->runtime->connectionState->val eq 'connected') {
                        my $datastores = Vim::get_views (mo_ref_array => $cluster->datastore);
                        foreach my $datastore (@$datastores) {
                                  print "  Datastore ", $datastore->host->summary->config->name,"\n"
                        }
                }
                elsif ($host->runtime->connectionState->val eq 'disconnected') {
                        print "\t|", $host->summary->config->name, "|Disconnected|\n"
                }
                elsif ($host->runtime->connectionState->val eq 'notResponding') {
                        print "\t|", $host->summary->config->name, "|Not Responding|\n"
                }
        }
```
Cannot call method 'Summary' on some wrapping 71 de./listCluster.pl.
Disconnection of the end
=========================================================================
-William
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

OK, I remembered how it works. Sorry for the noise:

|

My $datacenter = Opts::get_option ('Center');

My $datacenter_view = Vim::find_entity_view (view_type = > 'Data center',)

filter = > {name = > $datacenter});

If (! $datacenter_view) {}

Die "data center" "» $datacenter. "" not found\n ";

}

My $cluster_views = Vim::find_entity_views (view_type = > 'ClusterComputeResource',)

begin_entity = > $datacenter_view);

My $counter = 1;

Print "Clusters found: \n";

{foreach (@$cluster_views)}

Print "$counter:". "." $_-> name. "\n";

My $datastores = Vim::get_views (mo_ref_array = > $_-> data store);

foreach my {$datastore (@$datastores)}

my $instances = @{$datastore-> host};

my $instance = 0;

while($instance < $instances) {}

My $x = Vim::get_view (mo_ref = > $datastore-> Home-> \[$instance\]-> key);

print $datastore--> summary-> name, "Datastore", $x-> name, "\n";

$instance ++;

}

}

$counter ++;

}

T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?

CS6 using
T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?
Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.
It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).
Question, am I suppose to create the right design in the large rectangle?
2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.
What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.
How to make the small rectangle in the large t-shirt too?

Hello

The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.

(1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.

(2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.

(3) select the small rectangle, and delete.

(4) use the Rectangle tool to draw a new in size.

5) option click on the new rectangle to open a launcher. Select make Guides.

You now have a guide again, larger rectangle! Let me know if you have any other questions.

Taskflow have model (using the view object instances) of two data sources
JDeveloper Version: 11.1.2

We have a flow of single task that has built pages on two modules of the Application that are based on two different data sources.
If the default activity in the workflow uses a display Instance of AM belonging to a particular data source object.
Browsing later, we reach a page that uses instances of object of another display AM belonging to a different data source, the framework does NOT deliver from the SQL statement against this source of data rather than the data source used in the default activity.

How can it resolve to the appropriate data sources?

Thanks in advance,
Nini
Nini,

Yes, it's the way things are meant to run:

http://one-size-doesn
{: identifier of the thread = 1012099}

Definition data control range for the workflow to the 'remote' change the behavior?

John

Display the form guide in a flex application using the remote object

I am using livecycle workbench 8.2 and flex 3.0. Now I'm making the form of livecycle workbech guide. I use the provided process: samples-forms-> render form Guide 1.0. and use the SimpleMortgageLoan-formGuide(this has all 3 files: swc, xdp and xsd) for trial.
I am able to get the PDF and html using process and sample pdf are the option to provide. But I have error when using rendered form guide to get the livecycle form guide (I use that as a starting point:http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl /common/html/wwhelp.htm?context=sdkHelp & file = 000261.html):
Here is the error I get
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Timestamp: Monday, April 27, 2009 21:24:28 UTC
Message: Object EXPECTED
Online: 103
Char: 1
Code: 0
URI: http://serverHost/DocumentManager/docm1240857760906/eab56933d7dfefb501ad6549129d 40 d 2? type = dGV4dC9odG1sOyBjaGFyc2V0PWlzby04ODU5LTE =
Any idea?
Thank you.

The target url must be the address of the server that you want to retrieve information. For example http://localhost: 8080.

Jasmine

Solved: How use the display objects in several projects?
I have an object of common view that I need to use in several projects. How to import a view object pre-created in a project to re - use?

Thank you
Kurz

Published by: Kurzweil4 on July 14, 2010 12:15
In the package where the VO is defined, there should be a file server.xml file that contains all the BC4J objects. You can then add this file to your project in JDeveloper and it will add all the your defined in the file.

Kind regards
LC

No bounding box using the drawinmg object.

Similar Questions

Maybe you are looking for