No column primary key not defined. error

Similar Questions

• Is there a way to get a list of tables with multi-column primary keys?

  I have a model over 1000 tables, each containing primary and some keys with unique indexes.  I need a list of multi-column primary keys and a list of the unique indexes that are not the primary key.  Is there a way this information easily?

  I have a generator that creates the merge instructions and I needed a way to retrieve the PK, if any, UK and otherwise the first Unique Index.  This comes from a cursor, so there are some variables for the schema and the name of the table and a constant for pk 'P' and 'U '.

  -- Primary/Unique Key
  SELECT   *
  FROM     dba_cons_columns concol, dba_constraints con
  WHERE    concol.owner = UPPER ( pv_schema )
  AND      concol.table_name = UPPER ( pv_table_name )
  AND      ( con.constraint_type = const.v_constraint_primary
  OR        ( con.constraint_type = const.v_constraint_unique
  AND        NOT EXISTS
               (SELECT NULL
                FROM   dba_constraints conx
                WHERE  conx.constraint_type = const.v_constraint_primary
                AND    conx.owner = con.owner
                AND    conx.table_name = con.table_name
                AND    conx.constraint_name = con.constraint_name) ) )
  AND      concol.owner = con.owner
  AND      concol.table_name = con.table_name
  AND      concol.constraint_name = con.constraint_name;
  
  -- Unique Index
  SELECT *
  FROM   dba_ind_columns indcol,
         (SELECT   indcol.table_owner,
                   indcol.table_name,
                   indcol.index_owner,
                   MIN ( indcol.index_name ) min_index_name
          FROM     dba_ind_columns indcol, dba_indexes ind
          WHERE    ind.index_type = 'NORMAL'
          AND      ind.uniqueness = 'UNIQUE'
          AND      indcol.table_owner = UPPER ( pv_schema )
          AND      indcol.table_name = UPPER ( pv_table_name )
          AND      indcol.table_owner = ind.table_owner
          AND      indcol.table_name = ind.table_name
          AND      indcol.index_owner = ind.owner
          AND      indcol.index_owner = indcol.table_owner
          AND      indcol.index_name = ind.index_name
          GROUP BY indcol.table_owner,
                   indcol.table_name,
                   indcol.index_owner) ind
  WHERE  indcol.table_owner = ind.table_owner
  AND    indcol.table_name = ind.table_name
  AND    indcol.index_owner = ind.index_owner
  AND    indcol.index_name = ind.min_index_name;
  

• primary-key foreign force error

  Hello
  I have a form based on a table T1. When I save this form or update this form it will be insert/update record into T1. At the same time, when I update/create a folder, I need to insert a new record into a table T2. I created a package to do this, and it gets called after submit process
  IF: REQUEST ('SAVE', 'CREATE'), THEN
  Call my package.procedure (p1, p2, p3);
  END IF;
  I get an error and I don't know why. The record in the main table T1 is not created, but he's trying to create a record in the secondary table. Because of the primary-key foreign force I get the error message.
  How can I fix? Should I create my own record / update / delete button?
  
  Thank you

  Hello:

  APEX can certainly do. The automatic DML process wasn't because you got the P3_STATUS page-item defined with a Source Type of "Column of the database" and "wrkordr_id" provided as it corresponds to the database column.
  The update seems to work now.

  CITY

• Impdp table parent key not found error

  I can't import a table into a database of 10.2.0.5 for 11.2.0.3 another. When I imported the first I get 1 error on creating a 1 constraint:

  Impdp tables of lego/password = estact directory = datapump dumpfile = estact.dmp

  Import: Version 11.2.0.3.0 - Production on Wed Apr 2 13:25:22 2014 Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved. Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, Automatic Storage Management, OLAP, Data Mining

  and Real Application Testing options

  Table main "LEGO". "' SYS_IMPORT_TABLE_01 ' properly load/unloaded

  Departure "LEGO". ' SYS_IMPORT_TABLE_01 ': lego / * tables = directory = datapump dumpfile = estact.dmp estact.

  Object type TABLE_EXPORT/TABLE/TABLE processing object TABLE_EXPORT/TABLE/TABLE_DATA of treatment type

  . . imported "LEGO". "' ESTACT ' 56.01 MB 612972 lines

  Processing object type TABLE_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

  Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX

  Object type TABLE_EXPORT/TABLE/CONSTRAINT/treatment

  Object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

  Object type TABLE_EXPORT/TABLE/COMMENT of treatment

  Object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

  ORA-39083: Type as ref_constraint cannot be created with the object error:

  ORA-02298: cannot validate (LEGO. EstOp_EstAct) - parent key not found

  Because sql is:

  ALTER TABLE 'LEGO '. "' ESTACT ' ADD 'EstOp_EstAct' of CONSTRAINT FOREIGN KEY ('ESTOP_ID')

  REFERENCES "LEGO". "" ESTOP "ENABLE ("ESTOP_ID")

  Object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

  Working "LEGO". "" SYS_IMPORT_TABLE_01 "completed with error (s 1) at 13:25:28

  Load data however this foreign key is not there then try to create manually after I get this error:

  "ORA-02298: unable to validate (LEGO." EstOp_EstAct) - parent key not found ".

  This source table has 3 foreign key constraints. The one that I'm having a problem setting (above) is a constraint against himself.

  I tried another approach. I exported and imported the metadata only and successfully completed. However when I then exported and imported DATA only, the data will not now with the same error:

  ORA-31693: Table object 'LEGO' data "' ESTACT ' failed to load/unload and being ignored because of the error:

  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-02291: integrity constraint (LEGO. EstOp_EstAct) violated - key parent not found

  My question is what I have to do something different when you work with a table with a foreign key against himself constraint?

  Here's the DOF of the source table and 3 foreign keys:

  CREATE THE LEGO TABLE. ESTACT

  (

  ESTOP_ID NUMBER (10,0) NOT NULL,

  OPCLASS_CODE VARCHAR2 (10) NOT NULL,

  ESTACT_FLAG NUMBER (5.0) NOT NULL,

  COSTR_NO_EST NUMBER (5.0) NULL,

  ESTACT_TIME NUMBER (10,0) NULL,

  ESTACT_FIX_COST NUMBER (20.4) NOT NULL,

  ESTACT_VAR_COST NUMBER (20.4) NOT NULL,

  ESTACT_LAB_COST NUMBER (20.4) NOT NULL,

  ESTACT_OEX_COST NUMBER (20.4) NOT NULL,

  ESTACT_TOT_COST NUMBER (20.4) NOT NULL,

  ESTACT_PRI_COST NUMBER (20.4) NOT NULL,

  ESTACT_CM_PRICE NUMBER (20.4) NOT NULL,

  ESTACT_PRI_RATE NUMBER (20.4) NOT NULL,

  ESTACT_IS_PRICE NUMBER (5.0) NOT NULL,

  NUMBER OF ESTACT_BASE_QTY NULL,

  RULE_CODE_BASE_QTY VARCHAR2 (10) NULL,

  ESTACT_NUM_FORMS NUMBER (5.0) NULL,

  ESTACT_FIXMIN NUMBER (10,0) NULL,

  UNIT_CODE_BASE VARCHAR2 (10) NULL,

  UNIT_CODE_INPUT VARCHAR2 (10) NULL,

  ESTACT_AFLAG NUMBER (5.0) NOT NULL,

  NUMBER OF ESTACT_AOPRATE NULL,

  RULE_AOPRATE VARCHAR2 (10) NULL,

  NUMBER OF ESTACT_AWARATE NULL,

  RULE_AWARATE VARCHAR2 (10) NULL,

  NUMBER OF ESTACT_OPRATE NULL,

  NUMBER OF ESTACT_WARATE NULL,

  RULE_CODE_COSTR VARCHAR2 (10) NULL,

  RULE_VAL_COSTR NUMBER (5.0) NULL,

  RULE_CODE_FIXMIN VARCHAR2 (10) NULL,

  CONSTRAINT ESTACT_IDX0

  PRIMARY KEY (ESTOP_ID, OPCLASS_CODE)

  USING INDEX TABLESPACE INDEX

  PCTFREE 10

  INITRANS 2

  MAXTRANS 255

  STORAGE INITIAL (128K

  DEFAULT USER_TABLES)

  ENABLE

  VALIDATE

  )

  BUNCH OF ORGANIZATION

  TABLESPACE USERS

  LOGGING

  PCTFREE 10

  PCTUSED 0

  INITRANS 1

  MAXTRANS 255

  STORAGE (DEFAULT USER_TABLES)

  NOPARALLEL

  NOCACHE

  NOROWDEPENDENCIES

  This is the foreign key DDL. Note the 1 that refers to the same table (the one I'm having a problem with)

  ALTER TABLE LEGO. ESTACT

  ADD CONSTRAINT 'EstOp_EstAct '.

  FOREIGN KEY (ESTOP_ID)

  REFERENCES TO LEGO. ESTOP (ESTOP_ID)

  ENABLE

  VALIDATE

  /

  ALTER TABLE LEGO. ESTACT

  ADD CONSTRAINT 'RuleCodeCost_URULE '.

  FOREIGN KEY (RULE_CODE_COSTR)

  REFERENCES TO LEGO. URULE (URULE_CODE)

  ENABLE

  VALIDATE

  /

  ALTER TABLE LEGO. ESTACT

  ADD CONSTRAINT 'EstActURule_FixMin '.

  FOREIGN KEY (RULE_CODE_FIXMIN)

  REFERENCES TO LEGO. URULE (URULE_CODE)

  ENABLE

  VALIDATE

  /

  Post edited by: karine

  As Galo indicated Balda, your child table (LEGO. ESTACT) has a folder that does not exist in your table parent (LEGO. ESTOP) and this effect is impossible to create the foreign key.

  You can find the recordings by running:

  select estop_id from LEGO.ESTACT -- CHILD TABLE
  minus
  select estop_id from LEGO.ESTOP -- PARENT TABLE
  

  AFTER BACK YOU UP YOUR DATA, you need to create the new record in the parent table or remove the child table record in order to comply with the foreign key constraint.

• DRIVERPATH variable is not defined error

  I just installed edition of coldfusion mx 6.1 Developer on vista Ultimate edition. The installation went well.
  However, I get an error when you add a data source in access or verify all connections.
  On the addition of the data source, I get the following error.
  
  Cannot update the NT registry.
  DRIVERPATH variable is not defined.
  
  Because of the incompatibility of vista?

  CF probably didn't have permission to access to your registry

  Find the following reg key

  HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC. INI\.

  do you see a chain called "pilot"?

  If not, create it with the value of "C:\WINDOWS\System32\odbcjt32.dll".

  If it works, Rob D. credit

• I get a "Application JavaScript - reference error: XPCSafeJSObjectWrapper is not defined ' error every time I try to open a new tab.

  As the title suggests, whenever I open a new empty tab on Firefox 4 Beta, I get an error that says "Application JavaScript - reference error: XPCSafeJSObjectWrapper is not defined" this never happened to me before moving on to a new version of the beta of Firefox some time ago... is it possible to fix this?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• first error: load key not found ERROR 999 (on blue screen...)

  I don't know what I was doing before the crash. But I know that after a reboot, I walked back and saw the following on a BLACK screen:

  No operating system found

  After panic completely, I rebooted and got this:

  On the blue screen: "key of loading not found error 999 (STHIVE =).

  Everything I tried to do since that time is up to us as 1. Memory is intact, 2. Hard drive needs to be replaced.

  I've been it for 15 years, reformatted computers, can hardly pull most problems, if it does not know where to look for answers.  But I've never had a total system crash.  I would like to have more information.

  WHAT I TRIED: recovery of Microsoft: failure |  HP recovery: failed

  I tried both several times.  I went into the bios diagnostics for, and that's when I got the 10008 = hard code it had to be replaced and code 10000 = memory? intact or something like that.

  Please someone... I need at least, recover the files if possible and learn how to replace a hard drive and get one at a great price.  I'm barely making it on the invalidity of the social security (because of Lupus, fibromyalgia, Chronic Fatigue, Addisons, several chronic autoimmune problems).  Some days my only contact with people using a laptop in bed is human.  That's why my sister bought and I would pay for 2 years.  2 years increased in March.  Now his seven and he broke down. Photos, MP3 files, etc., some are saved on flash drives.  Recording to an external hard drive... but alas, never did.

  FYI - I don't have a recovery disc - that I can find.  I ordered a drive recovery Windows Vista from MS yesterday, but if the hard drive is shot, it does not, right?  I also have HP files, for my HP Pavilion Entertainment PC, laptop, dv6736nr model.  Number of files available for download, boot order changed to ensure he'd be first boot CD, but he always comes back "no windows operating system" instead of launching the cd.

  Also - I don't know how to get into the back.  I bought my first computer in 94, post back and therefore never really learned much about it.  I can't do certain things in the BACK?

  Thanking in advance anyone who might help!

  Kathie aka Tobebo

  (Tobe and Bo are my two service companion Lhassa Apso dogs)

  Hello

  First thing to do is to replace the hard drive because apparently there is no. Data currently on the disk can sometimes be recovered by a person with technical knowledge, but you must be willing to pay for the service. It can be quite expensive.

  Running recovery disks will be futile until the above is accomplished. You will find that you will need to replace the memory as well. Maybe your system experienced a power surge?

  There is nothing to do in the BACK like that no longer exists as an underlying layer for the Windows operating system, it expired with WinME 10 years. Vista, XP, Win2K and NT line that they stem, using a command-line environment, but is not BACK and you can load it on a damaged disc. For what it's worth, you wouldn't be able to run the BACK of a hard drive from damage in any case, you'd have to load it from a floppy disk or a disk, and it is inefficient for an OS NT-based modern Windows.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP envy 5532: message key not valid error when you try to download the software

  I can't download my desire 5532 keep getting error message (key not valid for use in specified state).

  This problem is related to Microsoft Update KB2918614

  The solution is to remove this update.

  How to remove an update for Windows Vista

  If the fix works, I recommend that you 'hide' it so that it not be reinstalled automatically.

  Instructions below:

  If you don't want Windows to install an update, you need to hide.

  1. Open Windows Update by clicking on the button start . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click Find updates.

  3. When Windows finds updates for your computer, do one of the following:

     • Click the link that tells you important updates are available if you have some updates to hide.

     • Click the link that tells you optional updates are available if you have optional updates to hide.

  4. Do right click the update you want to install, and then click Hide update. The next time you check the updates, the update will not be automatically selected or installed. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• "Mandatory filed is not defined ' error occurred before the user enter the stage

  Hello

  After this problem to see if anyone can help.

  I use vRO 5.5. I create a workflow and add three steps for the user to enter.

  In step 1, the user will choose param_1. For step 2, param_2 is defined as entry required and predefined of items list. He'll call an Action for this list. Param_1 will be the parameter of this action. See the image below:

  

  Now I start this workflow, after I select param_1, Action in step 2 will be called immediately and error "required field is not defined" appeared in step 2. But I do not click even next to step 2.

  

  I don't think it's a user of good experiences. Does anyone have a solution for this problem?

  Thank you

  Vicky

  Hi Vicky,

  There is no solution for this problem (in the case of the vCO Java client). I couldn't be the best possible UX, but it's how we run presentations.

  On the level of the API, there is no special handling for the steps. Each operation is performed on the entire presentation. That is, consumer API specifies no such thing as 'current' step - the API takes one or more input parameters (possible from different stages) and returns the presentation all re-evaluated.

  Therefore for the API client to track the current step and decide whether to display warnings/errors for fields that do not belong to the current step. client Java vCO has decided to display all steps validation errors; other clients may decide differently and provide the best UX.

• Automatic numbering on a primary key (not in order)

  Hello
  
  I was wondering how an AutoNumber primary keys without using the sequence when 'on' insert.
  
  Right now I use trigger:
  

  TRIGGER "scott"."do_numbers" BEFORE INSERT ON "scott"."test" 
  REFERENCING NEW AS NEW FOR EACH ROW 
  
  declare
   pragma autonomous_transaction;
  begin
  
  SELECT
   nvl(MAX(ID),0)+1
   INTO :NEW.ID
    FROM test;
  commit;
  END;

  the trigger above works when I'm inserting line-by-line. But now, I tried to insert 300 rows at a time. Here the insertion fails... I think he should there be commit after each insertion (what I think).
  
  Can someone explain to me how can this "automatic" numbering can be made when inserting large number or rows of one table to another at the same time?
  
  Thank you!

  user13071990 wrote:
  Hello

  I know how to do this with sequence I ask just how it can be done without the help of a.

  You would not do otherwise than to use a sequence, otherwise you will have problems in a multiuser environment.

  The closest thing would use an update statement in your trigger code...

  UPDATE test
  SET id = NVL(id,0)+1
  RETURNING id INTO :new.id;
  

  Although this is not ideal and you must use sequences.

  And you most certainly not use autonomous transactions within a trigger. It is simply not true, especially when you are trying to manipulate the data on the table of the triggers.

• 1120:access of property not defined error

  to import flash.net.NetStream;

  Import mx.events.FlexEvent;

  private const CirrusAddress:String = "rtmfp://p2p.rtmfp.net/";

  private const DeveloperKey:String = "mydevkey";

  private var nc:NetConnection;

  private var myPeerID:String;

  private var recvStream:NetStream;

  private var myName:NetStream;

  protected function application1_creationCompleteHandler(event:FlexEvent):void

  {

  NC = new NetConnection();

  nc.addEventListener (NetStatusEvent.NET_STATUS, ncStatus);

  NC. Connect ("rtmfp://p2p.rtmfp.net/mydevkey/");

  }

  protected function ncStatus(event:NetStatusEvent):void {}

  myPeerID = nc.nearID;

  peerIdArea.text = myPeerID;

  }

  myName = new NetStream (nc); ERROR IS HERE

  ---------------------------------------------

  The path location type Resource Description

  1120: access of undefined property username.     P2PSample.mxml/P2PSample/src/line 30 Flex problem

  The path location type Resource Description

  1120: access of undefined property nc.     P2PSample.mxml/P2PSample/src/line 30 Flex problem

  NC is not defined in your code when this line 30 running because it runs before application1_creationCompleteHandler() is running.

  fix this.

  to import flash.net.NetStream;

  Import mx.events.FlexEvent;

  private const CirrusAddress:String = "rtmfp://p2p.rtmfp.net/";

  private const DeveloperKey:String = "mydevkey";

  private var nc:NetConnection;

  private var myPeerID:String;

  private var recvStream:NetStream;

  private var myName:NetStream;

  protected function application1_creationCompleteHandler(event:FlexEvent):void

  {

  NC = new NetConnection();

  nc.addEventListener (NetStatusEvent.NET_STATUS, ncStatus);

  NC. Connect ("rtmfp://p2p.rtmfp.net/mydevkey/");

  nsF();

  }

  protected function ncStatus(event:NetStatusEvent):void {}

  myPeerID = nc.nearID;

  peerIdArea.text = myPeerID;

  }

  private function nsF (): void {}

  myName = new NetStream (nc);

  }

• Validation auto-generated Primary Key not Null

  Hello
  
  I have a generated Assistant shape, that has a primary key that is generated automatically by a trigger before insert. In my form, primary key is initially empty and after that the user saves the form, then the primary key generates a number and that it fills in the form. I currently have a non-Null on the form validation, after that the user submitted the form and wants to update. How can I keep the validation non-Null on the form so that the user can write again at the start of the database, with the empty primary key field? Auto Wizard generates this out of the constraints of the table, and I would like to know if it is a validation required?
  
  
  Thank you
  Mary

  Well, you do NOT have NULL validation on the primary key point and that causes the problem that the user create folder? Started to run or remove the 'never '. I don't think it's necessary that you display as 'read only '.

  Kind regards
  Hari

• Multi-column primary key

  Hi all
  I have a problem with the pk consisting of a column of more than two. Only solution is to create a column with a meter?
  Thanks in advance

  Yes, that's the general idea with Apex. Set the PK is a sequential numeric value and make your functional key a unique index. This allows:

  1. more than two columns in the composite key.

  2. the user can define its own values of PK (usually default Apex do not like to let the user do that anyway, especially in tabular form).

  I don't like that much overall (I don't like how Oracle Forms could face the user by specifying values PK) even if I guess the advantage is an immutable PK which could be better in the long run.

• Call to the maybe not defined (error 1180)

  Hi, I'm busy making a script3.0 of interactive multiple choice question and answers and questions data are extracted from an external XML.

  now the problem is probably very simple and I might have forgotten (kinda a n00b in AS3, I know the main bases, but that's all)

  code below

  import flash.net.URLLoader;
  import flash.events.Event;

  questions of the var: Array = new Array();
  responses of the var: Array = new Array();

  var XMLloader:URLLoader = new URLLoader();
  XMLloader.addEventListener (Event.COMPLETE, loadXML);
  XMLloader.load (new URLRequest ("quiz.xml"));

  function loadXML(e:Event):void
  {
  var myXML = new XML (e.target.data);
  var loop = myXML.Item.length ();
  for (var i = 0; i < loop; i ++)
  {

  
  questions [i] = myXML.Item [i] issue;
  Answers [i] = [myXML.Item [i] .option1,
  myXML.Item [i] .option2,
  myXML.Item [i] .option3,
  myXML.Item [i] .option4];
  }
  trace (myXML);
  }

  qno var = 0;

  function change_question() {}
  issue. Text = questions (Qno);
  option1. Text = Answers (Qno) [0];
  option2. Text = Answers (Qno) [1];
  Option3. Text = Answers (Qno) [2];
  option4. Text = Answers (Qno) [3];
  }

  change_question();

  Stop();

  so all errors are in the highlighted section.

  Scene 1, Layer ' Actionscript 3.0 ", image 1, line 29 1180: call to a question of method possibly undefined."
  Scene 1, Layer ' Actionscript 3.0 ", frame 1, line 30 1180: call to a response from method, possibly undefined."
  Scene 1, Layer ' Actionscript 3.0 ", frame 1, line 31 1180: call to a response from method, possibly undefined."
  Scene 1, Layer ' Actionscript 3.0 ", image 1, line 32 1180: call to a response from method, possibly undefined."
  Scene 1, Layer ' Actionscript 3.0 ", image 1, line 33 1180: call to a response from method, possibly undefined."

  hope I don't sound noobish.

  Frooble

  Chances are each line with the qno in parentheses must be qno parentheses (even if I don't check as to whether the answers are a 2d table)...

  issue. Text = issues [Qno];
  option1. Text = Answers [Qno] [0];
  option2. Text = Answers [Qno] [1];
  Option3. Text = Answers [Qno] [2];
  option4. Text = Answers [Qno] [3];

• 3 subform not defined error on submit

  I have a form that has a send email button that performs some field check when the click on.

  When I click the submit by e-mail button, I get an error message "undefined subform 3.

  What Miss me?

  Thank you

  MDawn

  Try the fully qualified name by referring to the form of control another page / subform.

  In your case, try the following in the email section...

  XFA. Form.Form1.page2.subForm3.approveDeny.RawValue

  Also for incidentNumber use the reference below.

  XFA. Form.Form1.page2.subForm2.incidentNumber.RawValue,

  Thank you

  Srini