No communication on version 2.2.4
In the latest WebOS updates, it still talks about WebOS 2.1 but last night I upgraded to 2.2.4 can you chenge the details here and we tell more about what has changed in this new version?
That's all that I could find on this subject: http://www.precentral.net/webos-2-2-4-rolling-out-limited-selection-pre-2-phones-brings-offerings-skype-and-touchpad-messaging
Tags: HP Tablets
Similar Questions
-
Adding a Cisco SX20 to Communications Manager version 10.5
Hi all!
Can someone help me, I try to save my end SX20 CUCM version 10.5 point.
Do you have a procedure that can show me how to do this configuration?
TKS,
CB
Try this:
http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/codec-c-s...
Sound for the most part similar to CUCM 10.5. A parameter is activated early to offer on the SIP profile, make sure that you select best effort.
-
BlackBerry 10 Confusion with the OS versions
Good evening
where can I find which version number is the latest version of the BB OS? I couldn't find the number on the BB site, but found one in the English Wikipedia: 10.3.2.2789.
My phone (Q10) says he has the version of the 10.3.2.2474 software and the operating system version 10.3.2.2639, and it is said that this version is the latest version.
How comes that this number is different so the wikipedia article and where can I find the correct version in the BB Web site?
Thanks for any information.
Q.
Hello
Yes, it is a matter of confusion. But do not understand that it is not strictly BBs responsibility to clear up the confusion. Indeed, BB control only a tiny part of the OS release cycle to end users. BB releases OS packages they approve in the world at the same time... but he returned to service businesses and other entities to control final to decide if/when a BONE should be released to their set of end users. Therefore, it is very likely for two holders of the exact model same device to have two different answers to the question of 'the latest OS', for this answer depends on each entity having approved control and pulled him out of their set of users.
Complicating things is the difference between the OS and the version of the software. Reference:
Depending on who you work and what is the context, you may need to understand both of them and be sure that you talk about appropriate things so that understanding can arise between the parties to the communication. Version of the software is, basically, a conglomerate of BONES, Radio and other versions in the package... However, I don't know, how they derive the values of version of the software. I find that in most cases, it is wise to always use two values in discussions (e.g., "OS10.3.2.2639/SR10.3.2.2474").
QUADRATUR wrote:
How comes that this number is different so the wikipedia article
Wikipedia is a database of users of the information... If nobody contributed updates, then they do not reflect.
QUADRATUR wrote:
where can I find the correct version in the Web of BB site?
You do not have... I have never found that a BB OS/SR easily visible Web page free. There are utilities that can be obtained and executed on BB servers to discover the information, but they are technical, time-consuming and a lot of time to properly interpret the results. I have, however, recently created a list of all the values of BB10 OS/SR, going back... some time to refer:
Once again, however, it is only what BB has published the world... He said nothing that any specific control entity (for example, companies) may or may not have approved for their set of users. Via the official/automatic methods, you will only be offered which your control entity approved. Using unofficial methods to get anything other than that.
Good luck!
-
Hi Experts,
We have Cisco VC configuration with details as below:
- Control of VCS with version X.7.0.1
- MCU 4501 with software version 4.2 (1.46)
- Codec C40 with version TC4.2.1.265253
The existing installation works independently and not integrated with Cisco Call Manager. Now, since we need to integrate VC with Call Setup Manager 10.5, so, we must update the versions of above material according to the link thebelow
So, my question is on the pre-requistie to keep in mind as any DRAM or we can simply upgrade to the latest version now and later on we can upgrade integrate with Call Manager 10
Finally, I can find the firmware TC6.3.3 and TC7.3.0 to C40. Which one should I go to?
regds,
Aman
You can go directly to TC 6.x or TC7.x if you want to, with all the different security issues, probably the best going with the latest version of the software. Just need a version key valid since it is a major release of the version you currently have.
Looking to register your telepresence to CUCM codecs? If so, suggest you read Administration of running TC7.2 on 10.5 UCM endpoints. If you plan to save your end points of CUCM, you CUCM destined firmware. If you plan to save your VCS or use as a standalone codec, then the software package that you have surrounded in your image, it is what you want.
VCS will require a release key as well, since it will be a major version upgrade, the latest version is X8.5 that came out last month. MCU requires that no key release at all, so you can improve it without concern.
If you have valid support contracts you can get the keys to release of Cisco Licensing Portal, select "Get the other licenses", then "Telepresence Software Release Key.
-
How do I sync iphone with mac now that Firefox Home is no longer available?
Is there a program to do this?
https://iTunes.Apple.com/us/app/bookmarks-on-the-go/id550037184 has replaced Firefox Home. Please note that this is a community maintained version of Firefox Home, so there is no official support.
-
Use applescript for Python Shell command
Is there a way where I can make applescript to view the output of the python script and also accepts input so that it can pass it to the python script? My script contains several entry so is it possible possible to do? For more than once in entry and exit every time?
You can certainly create handlers AppleScript (functions) that use Python HERE documents, with AppleScript variable passed into Python as command-line arguments, or returned to AppleScript. AppleScript's display of limited capacity, but does not preclude a cocoa of coding, or TCL GUI for the display format most of in the Python code.
You can also write a Python application that can invoke AppleScript, pass the values on the command line values and return to Python AppleScript. This can be done through a presentation of subprocess or directly through NSAppleScript.
Here's an AppleScript that uses a Python Manager to glance in a .docx Word document and display the names of fonts used in it. Only .docx, not. doc. Notes to escape the double quotes and back-slash in the Python script to appease AppleScript.
-wordfonts.applescript
-display fonts (read-only) in the Word (.docx only) document in the menu drop-down
-VikingOSX, 01/2016, support Apple community
-Version 1.2, the additional list comprehension to Python print statement, other settings.
property docx: {'org.openxmlformats.wordprocessingml.document'}
property mydefault: ((path to the documents folder) as text) as alias
Try
the value docxfile to POSIX path of (Choose file type docx default location mydefault without invisible)
If result = {return button: 'Cancel'} then error -128 - cancelled by the user
say application 'System events' to the value docxname to the name of (POSIX file docxfile as alias)
display the dialog box "Document:"& docxfile & return & return & (elements of my docxfonts (quoted form of docxfile)) as text with the title "Word Document Fonts" give up after 20.
we errnbr error error message number
Error_Handler (errnbr, errmsg)
end try
return
on docxfonts (thefile)
return the shell script "python".
import the zip file
import re
Import os
import sys
fonts =]
thedocx = os.path.expanduser(sys.argv[1])
If not thedocx.endswith ('.docx'):
raise exception ("not a valid docx Word document'")
If zipfile.is_zipfile (thedocx):
with the zip file. Zip (thedocx, 'r') as docxzip file:
XMLDATA = docxzip.read('word/fontTable.xml')
fonts = re.findall (r'(?<=w:name=)\"([ \\w+]+)\"="">', xmldata))
print (------"} \".format ('\\n'.comes ([x for x in sorted (fonts) if fonts])) ")
EXPRESSIONS OF FOLKLORE. "
end docxfonts
on error_handler (nbr, msg)
return Display alert «["& nbr &" "']" & msg as critical leave after 10 "»
end error_handler
Python script that illustrates the passage of an argument to an AppleScript application that runs as a subprocess.
#! / usr/bin/env python
# coding: utf-8
# dx.py: illustrates the passage of a Python variable in a function that
# contains a string variable (ascript) which is the AppleScript
# code that osascript runs in the sub-process. The value of allow
# following the scriptname as ARGV 1, which is taken by the
# argv clause of AppleScript.
# Use:. DX.py
# VikingOSX, 12/2015, Apple Support communities
# v1.2
import of subprocesses
Import atexit
import sys
MSG = 'the value of x is 10'.
procs =]
def send_dialog (allow):
AScript = "'
on run argv
Set userCanceled false
If (argv County) = 0 then
Tell application "system events" to display dialog ¬ "argv is 0". "
After 10
on the other
the value of msg (item 1 of argv) text
end if
Try
Tell application "system events" to display dialog ¬ msg
with the title 'Application Communication' give up after 10
the error number - 128
userCanceled set to true
try to end
If userCanceled then return "Cancel".
return
end of race
'''
Try:
proc = subprocess.check_output (['osascript', '-e', ascript, allow])
If "Cancel" in proc.decode('utf-8'): # the user presses the Cancel button
sys. Exit ("User Canceled")
except subprocess. CalledProcessError as e:
print (' Python error: [% d]\n%s\n' % e.returncode, e.output])
generator of # @atexit.register to clean any stray sub-process
def kill_subprocesses():
for proc in procs:
proc. Kill()
def main():
send_dialog (MSG)
If __name__ == "__main__":
sys. Exit (hand ())
-
Material Regarrding OR-FBUS SOFTWARE for Fieldbus Foundation
Dear Sir Madam,
We use software of NOR-FBUS for Foundation field devices.
But our laptop broke down. Please suggest there is no chance of the failure of the software.
If yes then suggest, how can save us the same?
We have seen software CD (NI - FBUS Communication SW Version 3.1 NI - FBUS Configurator for WIN NT/2000/XP Version 3.1) & PCMCIA card also.
Can I use the same after our laptop repair?
Waiting for your answer.
Thank you & best regards
Akbar Ali
09321315746
Hi Akbar Ali,
You can use the same NOR-FBUS 3.1 CD to reinstall the software OR FBUS.
Serial number for the software OR FBUS is necessary to complete the installation. Please send an email to [email protected] with the following information.
-User name
-Company
-Serial number of your card PCMCIA-FBUS. The serial number is below the bar code printed on the back of the card
I'll send you the serial number of the NOR-FBUS software for installation.
-
Hello
I want to use serial port VISA instand MSCOMM32.
I have download MSCOMM.ocx, then add this file in the system directory and registered using the following command: "regsvr32 C:\Windows\system32\MSCOMM. OCX'.but when I import the ActiveX (Microsoft communication control, version 6.0), it popup a dialog box displaying picture1. "" class is not registered for use.
I googled a solution. some tips suggested me to use vb6cli.exe (a utility designed to solve the problems of license with ActiveX controls). http://support.Microsoft.com/kb/194751
so bad, when I install vb6cli.exe, it shows "Visual Basic 6.0 is not detected on this system".
I don't know if I should install Visual Basic 6.0 Enginee?
I can't believe that an AciveX is so hard to install before I can use!
Can someone give me a solution.
Yes, I slove with advice from microsoft web.
run a registry as of the following file:
-
Maximum length of the SQL command
I created a MySQL database and a LabView 8.6 application that inserts data into the database using the SQL Toolbox. I have a problem very long character data insertion in a LONGTEXT field. I determined that the problem occurs when the SQL command is more than 1 048 574 characters or the length of a particular field exceeds 1 048 326 characters (cannot say who).
The error I get is "error-2147467259 occurred at NI_Database_API.lvlib:Conn Execute.vi. "Exception occurred in the Microsoft OLE DB provider for ODBC drivers: [MySQL] [ODBC 5.1 Driver] [mysqld - 5.1.35 - community] MySQL version disappeared in NI_Database_API.lvlib:Conn Execute.vi.
According to the MYSQL documentation, a LONGTEXT can 4294967295 characters, so length shouldn't be a problem. The documentation also indicates "the effective maximum length of LONGTEXT columns also depends on the maximum packet size that is configured in the client/server protocol and available memory", but I don't know how to configure the packet size in LabView.
I enclose the code example that reproduces the problem, although it is based on a special run table structure effectively. The table definition is included on the diagram.
This setting must be configured outside of LabVIEW (UDL or DSN).
You must configure the server and the client:
I found this link while searching on stackoverflow
http://dev.MySQL.com/doc/refman/5.1/en/packet-too-large.html
You may need to select/Configure a specific vendor (different) in order to set this variable.
-
I can't connect wireless in my office, but I do connect to other wireless?
I can to another wireless network and it works perfectly, but I can't connect to a wireless network in my office but other do.i traveled with the same wireless net work once and since then, so it can connect again. What is the problem? After a repair, he said "the problem with wireless adapter or access point.
my computer laptop description are
Description: Antheros AR9285 802.11/b/g/n/wifi adapter
progress: Antheros communication Inc.
version: 9.2.0.310
supplier: Antheros communication Inc.Hello
Try this link to several methods:
B Eddie
-
Taskeng error (Vista Ultimate). PC will not properly shutdown
Hey Microsoft board gurus,
(Running Vista Ultimate on a Dell Optiplex 330)
SHUTDOWN PROBLEM, here is what happens:
- I use start menu & off the pc.
- PC seems to turn off (but a few small red lights twinkling near the power button / at the front of the Tower & the rest of button IT turned on.)
- After about 10 minutes, the PC then restarts by itself
- He can complain about "an unscheduled stop.
- Then
- I stopped again, and finally, it shuts
Sometimes to get it off, I have to make a hold in the power button. I know that regularly isn't good for the computer.
At some point after the pc auto-entrée back, he sent this taskeng error, so maybe this is a hint on the cause of the problem.
- I tried to do a restore from the registry to May 7 (a date the pc was ok), tried ending taskeng before stopping, and I let a Windows system/repair/recovery Volume and still have the problem.
- Thinking maybe the computer was in the middle of the installation of Windows updates when I turn me off my PC at night, I have reviewed the updates of Windows 'Important' that were pending / CCEd would be / available, and they are useless for me (Office 2007 and IE) and should not have been install.
- I tried a few other things, and the problem happens even about half time or more when I turned off the PC for the night.
- I spoke to Microsoft; they don't help me without paying because my license code Vista is OEM, meaning that Dell is responsible for helping me. Dell will not help me without paying because they say that it is a software problem and those who are not included in no charge technical support and was told to talk to Microsoft.
Any advice to get my computer to close normally again? It is very annoying because it takes TWO stops in about 10 min. OR a hold-in button stop making my PC actually turn off. The text of the error below. Thank you.
Signature of the problem:
Problem event name: BlueScreen ((registry of means files are corrupt MATERIAL ts rep sales; AFTER this error if I post in the community))
OS version: 6.0.6002.2.2.0.256.1
Locale ID: 1033More information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 86DDA430
BCP3: 86DE1348
BCP4: 8460BE28
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\Mini050910-02.dmp
C:\Users\Kurt Kirton\AppData\Local\Temp\WER-40029-0.sysdata.xml
C:\Users\Kurt Kirton\AppData\Local\Temp\WERCAAD.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409You said Details of the bugcheck 0x9f - DRIVER_POWER_STATE_FAILURE. "This bug check indicates that the driver is in an inconsistent or invalid power state." The problem is that "a device object has been blocking an IRP for too long."
You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?
Consider the following general guidelines for dealing with bluescreens.
Consider running chkdsk on all partitions. Leave complete chkdsk on each partition and see if that helps.
Also consider running SFC/scannow.
If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?
Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review. Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.
Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.
It may be useful to use the driver verifier. To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.
Then restart and use the system as you normally and wait for a problem. In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.
Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.
-
Command center Alien not finding my camera.
Hey everybody
Ive got an alien ware laptop mx17 r4 and my brother gave me it and removed everything like it was brand new, but he left his old color scheme and now I want to change it. I downloaded the latest version of the alien command center and it comes up with two warnings:
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.NullReferenceException: Object Reference not set to an instance of an object.
at AlienLabs.AlienFX.Controller.ControllerMainForm.closingApplication)
at AlienLabs.AlienFX.Controller.ControllerMainForm.controllerMainFormFormClosing (Object sender, FormClosingEventArgs e)
to System.Windows.Forms.Form.OnFormClosing (FormClosingEventArgs e)
at System.Windows.Forms.Form.WmClose (Message & m)
at System.Windows.Forms.Form.WndProc (Message & m)
at AlienLabs.AlienFX.Controller.ControllerMainForm.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
AlienwareAlienFXController
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/Program%20Files/Alienware/Command%20Center/AlienwareAlienFXController.exe
----------------------------------------
AlienwareAlienFXTools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienwareAlienFXTools/1.0.92.0__bebb3c8816410241/AlienwareAlienFXTools.dll
----------------------------------------
Alienlabs.CommandCenter.Tools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/Alienlabs.CommandCenter.Tools/1.0.92.0__bebb3c8816410241/Alienlabs.CommandCenter.Tools.dll
----------------------------------------
System.Windows.Forms
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8681 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
AlienLabsTools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabsTools/1.0.92.0__bebb3c8816410241/AlienLabsTools.dll
----------------------------------------
System.Configuration
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8679 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
WindowsBase
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/WindowsBase/3.0.0.0__31bf3856ad364e35/WindowsBase.dll
----------------------------------------
PresentationFramework
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework/3.0.0.0__31bf3856ad364e35/PresentationFramework.dll
----------------------------------------
PresentationCore
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_32/PresentationCore/3.0.0.0__31bf3856ad364e35/PresentationCore.dll
----------------------------------------
System.Management
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
AlienFX.DeviceDiscovery
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.DeviceDiscovery/1.0.92.0__bebb3c8816410241/AlienFX.DeviceDiscovery.dll
----------------------------------------
AlienLabs.MasterIOBoard.Communication.Core
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication.Core/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.Core.dll
----------------------------------------
AlienFX.Communication
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.Communication/1.0.92.0__bebb3c8816410241/AlienFX.Communication.dll
----------------------------------------
AlienLabs.MasterIOBoard.Communication
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.dll
----------------------------------------
System.Core
Assembly version: 3.5.0.0
Win32 Version: 3.5.30729.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
Technology LightFX
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/LightFX/1.0.92.0__bebb3c8816410241/LightFX.dll
----------------------------------------JIT debugging *.
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
permit.For example:
When JIT debugging is enabled, an unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.and the following:
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.NullReferenceException: Object Reference not set to an instance of an object.
at AlienLabs.AlienFX.Controller.ControllerMainForm.closingApplication)
at AlienLabs.AlienFX.Controller.ControllerMainForm.controllerMainFormFormClosing (Object sender, FormClosingEventArgs e)
to System.Windows.Forms.Form.OnFormClosing (FormClosingEventArgs e)
at System.Windows.Forms.Form.WmClose (Message & m)
at System.Windows.Forms.Form.WndProc (Message & m)
at AlienLabs.AlienFX.Controller.ControllerMainForm.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
AlienwareAlienFXController
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/Program%20Files/Alienware/Command%20Center/AlienwareAlienFXController.exe
----------------------------------------
AlienwareAlienFXTools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienwareAlienFXTools/1.0.92.0__bebb3c8816410241/AlienwareAlienFXTools.dll
----------------------------------------
Alienlabs.CommandCenter.Tools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/Alienlabs.CommandCenter.Tools/1.0.92.0__bebb3c8816410241/Alienlabs.CommandCenter.Tools.dll
----------------------------------------
System.Windows.Forms
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8681 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
AlienLabsTools
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabsTools/1.0.92.0__bebb3c8816410241/AlienLabsTools.dll
----------------------------------------
System.Configuration
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8679 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
WindowsBase
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/WindowsBase/3.0.0.0__31bf3856ad364e35/WindowsBase.dll
----------------------------------------
PresentationFramework
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework/3.0.0.0__31bf3856ad364e35/PresentationFramework.dll
----------------------------------------
PresentationCore
Assembly version: 3.0.0.0
Win32 Version: 3.0.6920.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_32/PresentationCore/3.0.0.0__31bf3856ad364e35/PresentationCore.dll
----------------------------------------
System.Management
Assembly version: 2.0.0.0
Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
AlienFX.DeviceDiscovery
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.DeviceDiscovery/1.0.92.0__bebb3c8816410241/AlienFX.DeviceDiscovery.dll
----------------------------------------
AlienLabs.MasterIOBoard.Communication.Core
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication.Core/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.Core.dll
----------------------------------------
AlienFX.Communication
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.Communication/1.0.92.0__bebb3c8816410241/AlienFX.Communication.dll
----------------------------------------
AlienLabs.MasterIOBoard.Communication
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.dll
----------------------------------------
System.Core
Assembly version: 3.5.0.0
Win32 Version: 3.5.30729.8693 built by: QFE
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
Technology LightFX
Assembly version: 1.0.92.0
Win32 version: 1.0.92.0
Code: file:///C:/WINDOWS/assembly/GAC_MSIL/LightFX/1.0.92.0__bebb3c8816410241/LightFX.dll
----------------------------------------JIT debugging *.
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
permit.For example:
When JIT debugging is enabled, an unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.so after I press on continue twice he begins to replace the files, because I do a repair and it asks me to choose my model I chose mx17 and then I restart it like he asked and I just get a white screen with no option to choose a box or change the colors. or this is what im blind and can not find the devices pane
Sorry for the long post
Hello
What Windows operating system you are running with your Alienware? Try to uninstall the Alienware Command Center application in the list of programs and features first, then restart the system and install the Command Center application again. Click here for the Alienware Command Center application download link.
-
Hello
I have a silly question, I've been checking here for CUCM / CIM & P compatibility:
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/im_presence/comp...
And I found this remark:
Note
9.1 (x) IM and presence Service Release is only supported with Cisco Unified Communications Manager version 9.1 (x).I think that no matter what 9.1 (x) CIM & P is compatible with CUCM 9.1 (1) and 9.1 2 or
CIM & P 9.1 (1) is only compatible with CUCM 9.1 (1)?
Thank you
Compatibility is only level X.Y, the only exception is 10.5 that go all the way to X.Y (Z) compatibility level.
-
LDAP contacts and photos for jabber, ipad, iphone, and Android does not
Hi guys,.
I have been and get off this forum and google after all settings and configurations, but I do not receive my ldap directory in sync with my mobile devices, which means, I do not see their photos or any contact details I can IM only my contacts.
My ipad and iphone from the newspapers, I get the following error.
-2014-06-25 11:11:18.181 DEBUG [a32c000] - [csf.person.ldap] [bind] LDAP bind error. code =-1, msg is Can not contact the LDAP server
My file config.xml - jabber for Jabber 4 Windows photos everything works 100%.
I have the UC Services configured and added to my end user.
I have the LDAP Setup on my devices TCT, tab and BOT with no luck.
What I'm missing or doing wrong? Why it works 100% for J4W but not my mobile clients.
Suggestions, examples or tips would be appreciated.
Links that I used:
https://supportforums.Cisco.com/document/101766/Troubleshooting-Cisco-Jabber-iPhone
https://supportforums.Cisco.com/document/129841/configure-directory-search-Jabber-iPhone
http://Warcop.WordPress.com/2013/07/08/Cisco-Jabber-and-your-XML-file/
A configure the LDAP UC service for iPad and the directory entry BDI for mobile devices in you jabber-config. XML?
-
HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody
Hello
We have a cisco ASA 5505 and try to get the next job:
ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client
the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)
When I try to access the url of the client, I get a syn sent with netstat
When I try trace ASA package, I see the following:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 0.0.0.0 0.0.0.0 outdoors
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
4 IP-OPTIONS ALLOW 5 CP-PUNT ALLOW 6 VPN IPSec-tunnel-flow ALLOW 7 IP-OPTIONS ALLOW 8 VPN encrypt ALLOW outdoors upward upward outdoors upward upward drop (ipsec-parody) Parody of detected IPSEC When I try the reverse (i.e. from the internet host to vpn client), it seems to work:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 192.168.75.5 255.255.255.255 outside
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in of access allowed any ip an extended list
4 IP-OPTIONS ALLOW 5 VPN IPSec-tunnel-flow ALLOW 6 VPN encrypt ALLOW My question is why this phenomenon happens and how solve us this problem?
Thanks in advance, Sipke
our running-config:
: Saved
:
ASA Version 8.0 (4)
!
ciscoasa hostname
domain somedomain
activate the password - encrypted
passwd - encrypted
names of
name 10.10.1.0 Hyperion
name 164.140.159.x xxxx
name 192.168.72.25 xxxx
name 192.168.72.24 xxxx
name 192.168.72.196 xxxx
name 192.168.75.0 vpn clients
name 213.206.236.0 xxxx
name 143.47.160.0 xxxx
name 141.143.32.0 xxxx
name 141.143.0.0 xxxx
name 192.168.72.27 xxxx
name 10.1.11.0 xxxx
name 10.1.2.240 xxxx
name 10.1.1.0 xxxx
name 10.75.2.1 xxxx
name 10.75.2.23 xxxx
name 192.168.72.150 xxxx
name 192.168.33.0 xxxx
name 192.168.72.26 xxxx
name 192.168.72.5 xxxx
name 192.168.23.0 xxxx
name 192.168.34.0 xxxx
name 79.143.218.35 inethost
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.72.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 193.173.x.x 255.255.255.240
OSPF cost 10
!
interface Vlan3
Shutdown
nameif dmz
security-level 50
192.168.50.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan23
nameif wireless
security-level 80
192.168.40.1 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
switchport access vlan 23
!
interface Ethernet0/7
!
passive FTP mode
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS lookup field inside
DNS server-group DefaultDNS
domain pearle.local
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
Remote Desktop Protocol Description
EQ port 3389 object
object-group service UDP - udp VC
range of object-port 60000 60039
object-group VC - TCP tcp service
60000 60009 object-port Beach
object-group service tcp Fortis
1501 1501 object-port Beach
Beach of port-object 1502-1502
Beach of port-object sqlnet sqlnet
1584 1584 object-port Beach
1592 1592 object-port Beach
object-group service tcp fortis
1592 1592 object-port Beach
Beach of port-object 1502-1502
1584 1584 object-port Beach
Beach of port-object sqlnet sqlnet
1501 1501 object-port Beach
1500 1500 object-port Beach
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-group network inside-networks
object-network 192.168.72.0 255.255.255.0
WingFTP_TCP tcp service object-group
Secure FTP description
port-object eq 989
port-object eq 990
DM_INLINE_TCP_1 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
DM_INLINE_TCP_2 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
the DM_INLINE_NETWORK_3 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
object-group network Oracle
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
network-object OracleThree 255.255.224.0
the DM_INLINE_NETWORK_5 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_6 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_7 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_8 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
EQ-3389 tcp service object
the DM_INLINE_NETWORK_9 object-group network
network-object OracleThree 255.255.0.0
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
object-group service DM_INLINE_SERVICE_3
the purpose of the ip service
EQ-3389 tcp service object
Atera tcp service object-group
Atera Webbased monitoring description
8001 8001 object-port Beach
8002 8002 object-port Beach
8003 8003 object-port Beach
WingFTP_UDP udp service object-group
port-object eq 989
port-object eq 990
WingFTP tcp service object-group
Description range of ports for the transmission of data
object-port range 1024-1054
HTTPS_redirected tcp service object-group
Description redirect WingFTP Server
port-object eq 40200
Note to inside_access_in to access list ICMP test protocol inside outside
inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note HTTP inside outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www
access-list inside_access_in note queries DNS inside to outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field
access-list inside_access_in note the HTTPS protocol inside and outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note 7472 Epo-items inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472
access-list inside_access_in note POP3 inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3
inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC
inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323
access-list inside_access_in note video conference services
inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list Fortis
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis
access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq
inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list
inside_access_in list extended access udp allowed any any eq isakmp
inside_access_in list extended access udp allowed any any eq ntp
inside_access_in list extended access udp allowed any any eq 4500
inside_access_in list of allowed ip extended access any Oracle object-group
inside_access_in list extended access udp allowed any any eq 10000
access-list inside_access_in note PPTP inside outside
inside_access_in list extended access permit tcp any any eq pptp
access-list inside_access_in note WILL inside outside
inside_access_in list extended access will permit a full
Note to inside_access_in to access the Infrastructure of the RIM BES server list
inside_access_in list extended access permit tcp host BESServer any eq 3101
inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
inside_access_in list extended access permit tcp any any HTTPS_redirected object-group
access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2
inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194
access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group
access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access deny ip any any inactive debug log
Note to outside_access_in to access list ICMP test protocol outside inside
outside_access_in list extended access permit icmp any one
access-list outside_access_in Note SMTP outside inside
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access udp allowed any any eq ntp disable journal
access-list outside_access_in note 7472 EPO-items outside inside
outside_access_in list extended access permit tcp any any eq 7472
outside_access_in list extended access permit tcp any any object-group inactive RDP
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit tcp any any HTTPS_redirected object-group
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group
outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP
outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access udp allowed any any eq 10000
outside_access_in list extended access will permit a full
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive
outside_access_in list extended access permit tcp any any Atera object-group
outside_access_in list extended access deny ip any any inactive debug log
outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip
outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192
inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group
inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0
access-list 200 scope allow tcp all fortis of fortis host object-group
access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group
outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip
outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.
Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0
Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0
Comment by Wireless_access_in-list of the traffic Internet access
Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any
standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0
splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0
standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0
splittunnelclientvpn list standard access allowed host 85.17.235.22
splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0
standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0
splittunnelclientvpn list standard access allowed host inethost
Standard access list SplittnlHyperion allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0
access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group
outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0
192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow
192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
MTU 1500 wireless
local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask
mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 613.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (wireless) 1 192.168.40.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02
public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)
static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255
public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255
public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255
public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255
public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255
public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255
public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255
public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255
public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255
public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255
public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255
public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255
public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255
public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255
public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255
public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255
public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255
public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255
public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255
public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255
public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255
public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255
public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255
public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255
public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255
public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255
public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255
public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255
public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255
public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255
public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255
public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255
public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255
public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255
public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255
public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255
public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255
public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255
public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255
public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255
public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255
public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255
public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)
public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)
static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Wireless_access_in in wireless interface
Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1
Route outside OracleThree 255.255.224.0 193.173.12.198 1
Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1
Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.40.0 255.255.255.0 Wireless
http 192.168.1.0 255.255.255.0 inside
http 192.168.72.0 255.255.255.0 inside
http GrandVisionSoesterberg 255.255.255.0 inside
SNMP-server host inside 192.168.33.29 survey community public version 2 c
location of Server SNMP Schiphol
contact Server SNMP SSmeekes
SNMP-Server Public community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map0 1 match address outside_cryptomap_1
outside_map0 card crypto 1jeu pfs
outside_map0 card crypto 1jeu peer 212.78.223.182
outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5
outside_map0 map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map0 1 set security-association life kilobytes 4608000
card crypto game 2 outside_map0 address outside_cryptomap_2
outside_map0 crypto map peer set 2 193.173.12.193
card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 2 set security-association seconds 28800
card crypto outside_map0 2 set security-association life kilobytes 4608000
card crypto outside_map0 3 match address outside_1_cryptomap
outside_map0 card crypto 3 set pfs
outside_map0 card crypto 3 peers set 193.172.182.66
outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA
life card crypto outside_map0 3 set security-association seconds 28800
card crypto outside_map0 3 set security-association life kilobytes 4608000
card crypto outside_map0 game 4 address outside_cryptomap
outside_map0 card crypto 4 peers set 213.56.81.58
outside_map0 4 set transform-set GRANDVISION crypto card
life card crypto outside_map0 4 set security-association seconds 28800
card crypto outside_map0 4 set security-association life kilobytes 4608000
card crypto outside_map0 5 match address outside_cryptomap_3
outside_map0 card crypto 5 set pfs
outside_map0 crypto card 5 peers set 86.109.255.177
outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 5 set security-association seconds 28800
card crypto outside_map0 5 set security-association life kilobytes 4608000
Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map0 interface card crypto outside
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP enable dmz
crypto ISAKMP enable wireless
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.72.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.72.0 255.255.255.0 inside
SSH GrandVisionSoesterberg 255.255.255.0 inside
SSH 213.144.239.0 255.255.255.192 outside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 194.151.228.18 is 10.10.1.100
dhcpd outside auto_config
!
dhcpd address 192.168.72.253 - 192.168.72.253 inside
!
dhcpd address dmz 192.168.50.10 - 192.168.50.50
dhcpd enable dmz
!
dhcpd address wireless 192.168.40.10 - 192.168.40.99
dhcpd dns 194.151.228.18 wireless interface
dhcpd activate wireless
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Group Policy "pearle_vpn_Hyp only" internal
attributes of Group Policy "pearle_vpn_Hyp only".
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplittnlHyperion
Split-dns value pearle.local
internal pearle_vpn_OOD_only group policy
attributes of the strategy of group pearle_vpn_OOD_only
value of Split-tunnel-network-list SplittnlOOD
internal pearle_vpn group policy
attributes of the strategy of group pearle_vpn
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list splittunnelclientvpn
Pearle.local value by default-field
Split-dns value pearle.local
username anyone password encrypted password
username something conferred
VPN-group-policy pearle_vpn_OOD_only
type of remote access service
tunnel-group 193 type ipsec-l2l
tunnel-group 193 ipsec-attributes
pre-shared-key *.
tunnel-group 193.173.12.193 type ipsec-l2l
IPSec-attributes tunnel-group 193.173.12.193
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group pearle_vpn remote access
tunnel-group pearle_vpn General-attributes
address pool VPN_Range_2
Group Policy - by default-pearle_vpn
pearle_vpn group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group Pearle_VPN_2 remote access
attributes global-tunnel-group Pearle_VPN_2
address pool VPN_Range_2
strategy-group-by default "pearle_vpn_Hyp only".
IPSec-attributes tunnel-group Pearle_VPN_2
pre-shared-key *.
tunnel-group 213.56.81.58 type ipsec-l2l
IPSec-attributes tunnel-group 213.56.81.58
pre-shared-key *.
tunnel-group 212.78.223.182 type ipsec-l2l
IPSec-attributes tunnel-group 212.78.223.182
pre-shared-key *.
tunnel-group 86.109.255.177 type ipsec-l2l
IPSec-attributes tunnel-group 86.109.255.177
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb
: end
ASDM image disk0: / asdm - 613.bin
ASDM BESServer 255.255.255.255 inside location
ASDM VPN_Pool_2 255.255.255.0 inside location
ASDM OracleTwo 255.255.224.0 inside location
ASDM OracleOne 255.255.240.0 inside location
ASDM OracleThree 255.255.224.0 inside location
ASDM location Exchange2010 255.255.255.255 inside
ASDM location Grandvision 255.255.255.0 inside
ASDM Grandvision2 255.255.255.240 inside location
ASDM Grandvision3 255.255.255.0 inside location
ASDM Grandvision4 255.255.255.255 inside location
ASDM GrandVision_PC 255.255.255.255 inside location
ASDM location LanSweep-XP 255.255.255.255 inside
ASDM GrandVisionSoesterberg 255.255.255.0 inside location
ASDM location Pearle-DC02 255.255.255.255 inside
ASDM location Pearle-WDS 255.255.255.255 inside
ASDM location Swabach 255.255.255.0 inside
ASDM GrandVisionSoesterberg2 255.255.255.0 inside location
don't allow no asdm history
Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?
If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.
NAT (outside) 1 192.168.75.0 255.255.255.0
Maybe you are looking for
-
Someone just hijacked my Apple ID! [Apple ID: * @gmail.com] I ' v opened the new Apple ID US in order to use Pokémon go Soft and post the Apple ID and password in the Facebook group so that users can download or update the application outside of the
-
iTunes is not able to find the USB controller on PC desktop computer and laptop
Hello Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have t
-
IPHONE 5 C WON'T PLAY VIDEOS
-
15-f009ca HP: HP 15-f009ca Notebook PC SM BUS Controller driver Windows 7 64 bit
Can't find Controllerdriver of Bus SM for HP 15 - f009ca Notebook PC? I know that the experts here is love wonder any help you can give me on this one, THX Tony
-
Hello Sorry for my bad English, in my application, I delete a file .qml and when I target in my app to the device the param file. I don't understand, I get the same result if uninstall my app on my device. Thank you;