No conference active on driver of telepresence

Similar Questions

• Conference of ad-hoc using telepresence virtual server and conductor

  I'm working on the implementation of a system of telepresence with 10.5 CUCM, telepresence Server version 4.2 (4.18) and telepresnce conductor version XC3.0.3 (both are installed on a virtual machine), I tested with a Codec SX80 with phones and telepresence 60 model 8941 SpeakerTrack.  I have some doubts about the features out.

  When I created an ad hoc conference and a third participant, this last participant's audio call only.  The conductor, I have 5 alarms and don't know how to fix them, look at joint file, talk about each alarm:

  -Alarm feature encryption key, there is a guide that is not clear to me using a Windows Server, is there another guide for this?

  -Alarm of telepresence server capacity which depends on the license?  I only have a single screen license

  I appreciate all the help that could help me solve this problem.

  Kind regards

  Juan Carlos Arias

  LIC-SW-EXP-K9 is your series Expressway.

  I don't know the part number for the telepresence server encryption key, but I think it is $0, you should be able to send [email protected] / * / and if you don't receive a PAK that he asks for it.

  Your conference models look correct, don't know what the problem could be just the hand.

  Multisite option key is not required, it is to allow the microcontroller embedded on the endpoints, for example your SX80.  In this case, you use driver with a server of telepresence to host conferences, so it is not necessary.

• Why finder hide Documents and office files in the home directory of the user by activating iCloud drive? What about the behavior of Time Machine backup or third-party applications?

  I'm under MacOS Sierra. I am connected to my iCloud account. I activated the option Desktop and Documents, but I did NOT activate the option optimize Mac storage, because I wanted to make sure that all my files would be available locally, just in case, I would need to work without an internet connection.

  -J' noticed there now a menu iCloud in my sidebar in the Finder, with links to Documents and desktop.

  -J' also noticed that Documents is no longer presented in my favorites in my side bar of the Finder.

  -This last suggests that files saved in 'Documents' are not saved more on my HD... but only in iCloud, which isn't what I want.

  -Then, sailing in the Finder Macintosh HD/users / 'My account' /, I noticed that my Documents and desktop folders are more visible, as if these files are not saved in my home folder most. Which raises the question: where are My Documents and files on my HD, so they are still?

  -Using a shell session in the terminal and again navigate to/Users / 'My account' /, I noticed that my Documents and desktop folders are still there. Which suggest that records and records of office reside actually still in my home folder under users, but Finder actually hide it and present them as being stored in iCloud only disc. It's very confusing.

  This raises several questions:

  -In the first place, why Apple hide Documents and office files in the directory? Why not view these folders in iCloud and directory?

  -Whence the iCloud folder or drive, reside actually on my hard drive?

  -What time Machine. Is it still back up my document files and folders?

  -What games third-party app mirroring backup of My Documents files and folders? They still work properly? (I use Livedrive backup and Sugarsync for files mirrored across several macs).

  -How can I understand that Apple is doing with my folders and files? Some users might be happy with the iCloud drive concept, without worrying about how it works, but I don't take chances, and I want to keep a good understanding about the functioning of my system.

  Could someone explain what is exactly happening?

  With office and selected Documents, access to these files are now in the iCloud Drive, not in your home folder.

  My guess would be that they do not appear in your file because it would be confusing for many people to make them in two places.

  If you want in the Favorites, open iCloud Drive and drag them in the sidebar here.

  All about iCloud drive has been saved on your Mac. With the exception of the office and the Documents, they are in ~/Library/Mobile Documents. However, if you choose optimized storage, older documents are removed from your Mac. I don't know what is "old".

  ~/Documents and ~/desktop have new metadata indicating probably Finder does not display them in a Finder window, only in iCloud drive. They are not hidden in one of the normal methods of unix.

  I have not tested Time Machine or any other backup program. The folder still exist in your directory home, and they still have all the files, I don't think that changes anything.

• always active hard drive

  My hard drive seems to be active all the time, even when no application works.  According to the monitor system uses the image name msmpeng.exe between 20-40% of CPU when this happens.  What is the cause and how can I stop this.

  You can test your computer in safe mode and see if the problem persists.

  You can also test the os and the browser via the network in safe mode options.

  Test the system in both modes for a couple of hours.

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• Windows 8 keeps on freezing, active hard drive at 100% of the time

  Hello. I was wondering if someone could help me with a little problem I seem to have met. This happens only in the last few days after I installed an update of Windows 8. I don't remember if I installed something else during this time, but I highly doubt it. I had problems with my computer freeze on me after being the counterpart of 10 minutes. It's always the same thing as well. I boot up perfectly fine, I can browse the internet and go through my files when suddenly my hard drive light goes solid, I check the Task Manager and it says that the activity time is 100% but is not read anything, and none of the files using the resources of hard drive which makes no sense. Before that happens, the Service Host: Local Service (small network) tends to spike up and down, as well as the system. I guess the system is a piece of data that the computer has recently been started and is still in process of initialization files.

  I am currently only able to run the laptop in Safe Mode. I can't mount /sfc on the normal start and had to do through Mode without failure. I tried a clean boot, but nothing helps, the problem still persisted. I want to try to disable several Microsoft applications, but I'm not too sure about those to whom I can turn off safely. The laptop is a Samsung Series 3, model NP355v5c-S08SE. Any help will be greatly appreciated this is currently shooting in the source of all banes!
  Thank you.

  Hi Daniel,.

  This problem may occur if there are any contradictory/material application installed on the computer.

  Please follow the steps to solve the problem:

  Method 1: Run convenience store performance of the system and check if the problem persists.

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) the search option now type the system maintenance .

  (d) click on the maintenance of the system to run the troubleshooter.

  Method 2: Run Microsoft Safety scanner.

  Download and run Microsoft Safety Scanner from the link to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also the articles below.

  Ways to improve the performance of your PC

  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

• Video-conference using SX 20 and telepresence ISDn device link

  Hello

  I have a cisco SX 20 and device connection isdn telepresence device. the procedure via below I have configured and coupled unit SX and telepresence

  Step: 1

  address configured static Ip add via remote control.

  Step: 2

  using static ip, I have connection to the SX 20 device, using the browser. (ip 10.1.1.2)

  Step: 3

  Configuration--> devices--> manage ISDN link--> click--> click combined with research

  Step 4

  In ISDN configuration of the link--> I have ISDN numbers entered the repertoire. Subsequently, it works fine.

  Problem:

  End of test, cancel us the twinning of the device and restart the SX 20. Subsequently, we are unable to pair the device of telepresence.

  While click Display message (No. DEVICES DETECTED) the search button.

  Please share the solution on an urgent basis.

  Thanks in advance.

  Rgds

  Vetri

  Did restart the ISDN link solves your problem?

• How to manage the assets Conference on Telepresence server controlled by the conductor

  Colleagues, Hello.

  How to add additional participants to the already begun scheduled conference or permanent on Telepresence server controlled by the conductor? Or so... How to make the call to the Conference on the telepresence server controlled by a number of additional connected participants of the conductor?

  I do not know the TMS, but I do not see active conference control features in its options. On the telepresence server, there is limited management capacities.

  A driver controlled TelePresence server has no conference control what so ever, as its all managed by TMS. In TMS you use Conference Control Center under surveillance to manage the scheduled conference. Conference ad hoc permanent that's not demand through TMS, endpoints will have to deal in itself.

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).

• How can I manage conference layout to the driver at the Conference?

  How can I manage conference layout to the driver at the Conference?

  I am able to change the layout to the MCU only, but through condcutor is not possible.

  I have driver manages 5 vTS.

  At the moment it is not possible to change the layout of the Conference on the driver or the vTPS managed remotely, this is possible since the Touchpad of the endpoint.

• Licenses on telepresence servers table in data sheet is not not to screen?

  I have deployed CUCM with driver version XC3.0.3 and vTPS (telepresence virtual server) version 4.1 (2.29).

  I made a model of the Conference on the driver to use HD 720 P 30 and content sharing 720 p 5.

  When I start a conference call with 2 endpoints VC I see 2 screen licenses are used, one for each endpoint.

  According to table 8 'telepresence screen of the license server by call for each Type of call' in the telepresence Server data sheet

  http://www.Cisco.com/c/en/us/products/collateral/conferencing/telepresen...

  Such resolutions should take license screen 1/2.

  Is this a bug or a configuration problem?

  If I call the Conference with audio only I see that no license used at all while the table indicated 1/52 of a license to screen will be used...

  You must be looking at the driver to see the actual number of resources on the server of telepresence.  The GST will report the number of screens are used, but driver will report the number of licenses of screen used for each call.

  See images attached to a test that I made just now with a GST which has only 3 licenses of the screen, but I'm able to connect up to 6 endpoints, each connected end point uses 1/2 a license of the screen.  The Conference model I use is set up similar to yours, but it has 720 p 5 active content.  Appeal of bandwidth is 1152 kbps.

• Conductor of telepresence

  Hello

  Any RDC to export report driver Telepresence is possible, as CUCM. or for having reported, we require MSDS. Pls suggest

  Conductor send data CDR what whether you are looking for the moment, see bug CSCuj42268, in order to get the Conference CDRs, you'll need to add conference bridges in MSDS. Below the limits of statement are described with conductor conferences.

  • Detail records (CDRs) of appeal conference bridges managed by TelePresence driver will contain all ConferenceIDs.
  • Conductor of telepresence itself does not feed back any conference CDRs to Cisco TMS. Bridges will be however, if added to the Cisco TMS.
  • According to the direction of the call, you could get incomplete of the COR, as outgoing calls can lead to incorrect data.
  • Bridge usage reports is not supported for conferences hosted on a driver of telepresence.

  To read these terms and others, refer to the conductor with the TMS (XC3.0 with TMS 14.6) Deployment Guide.  You can also check the local CMR Deployment Guides for more information as well.

• BIOS pass no HARD drive itself.

  The computer is HP Pavilion p6-2133w. Product # QW728AA #ABA. Windows 7 32 bit. No changes have been made. It started about two weeks ago. After the shut down and restart the BIOS changed the HARD drive for people with reduced mobility. Computer would not boot, just a black screen with a blinking cursor. Stop and restart I have to go to the cmos to change the rear of the active HARD drive and the computer will boot into Windows. I've never seen a BIOS itself by itself before changing. Does anyone have any ideas?

  Well boys and girls the initial problem of this computer by disabling the HARD drive seems to have been caused by a person changing modem wired to wireless modem without shutting down the computer first or change of wireless modem to the cable modem without shutting down the computer first. So far no one no occurrence of this problem given that the situation described above has been addressed. Thanks for your contribution and your help. I'll tell you that this problem has been resolved.

  Btk (billy the kid)

• iCloud drive synchronization failed

  Hi all

  I have a plan to iCloud 200 GB and filled my iCloud 84 GB data drive. I downloaded all of my iMac (OS X El Capitan) 2 weeks ago.

  I then enabled reader iCloud on my iPhone and PC. Everything (except a file on my PC) seems to sync right.

  But, with my MacBook Pro (OS X El Capitan), when I activated iCloud drive, there was a real problem.

  It seems fine synchronization and download several GB of files, but, at the same time, without anything special happening and several hours after the start, it's just... stop!

  And when I restart the iCloud drive computer restarts all over again as if nothing had ever been downloaded! I reboot again and it lights up constantly, never be able to finish my drive download whole iCloud.

  Also, I tried everything I found in this thread without success:iCloud Drive no local sync

  What can I do?

  Thanks for any response.

  When the sync seems to fail, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• need to drive replacement for xp media center edition 2005 operating system

  Computer crashed. active hard drive & ok. virus taken flight. Computer came with XP Media Center 2005 and Office already installed. It's a HP Pavilion. HP sells more spare parts because it is more than 5 years old. Where can I find an another disk operating system? Don't want to lose Office. Not too worried about anything else.

  burn the Hiren s cd in order to get at least to the desktop, you need to do is to look at the drive in disk management and see if a second partition is listed on the player, that would be the recovery partition.

  If a recovery partition is not displayed, you can use hiren to repair the registry:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-missing-or-corrupt/a1cf7ecf-e6c8-4546-AB88-f0e5abde7a13?msgId=52ff9278-5721-4B37-8887-700e274493b8

  read the response from Wunders for instructions on repairing the registry hive.

  But first traveled with the parameter/r hiren checkdisk, instructions are in my reply with download the hiren.

  EDIT:

  http://www.faultwire.com/solutions/using_system_restore_xp.php

  Here's a site with pictures on using the recovery console to repair the registry scroll down to the section for the recovery console

  Here are the instructions to burn a bootable cd with the recovery console, you do not have installation cd.

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  you will need to burn the cd from a working pc