Video-conference using SX 20 and telepresence ISDn device link

Similar Questions

• Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless?

  Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless? I could see the pictures, but really want to see videos?  I use the PlayMemories application for remote control. Any suggestions?

  Hi bill54107,

  Welcome to the community of Sony!

  Unfortunately, you can not view videos recorded wireless using your mobile device. You can transfer videos on your iPad, but only if they are saved in the format. Mp4 format AVCHD files can be transferred wireless to a tablet or a smartphone. Enable the video double setting Rec to shoot AVCHD and Mp4 format at the same time.

  You can only use the transfer of photos and AVCHD videos wireless when you download Wireless Auto Import (for Mac) and the House of PlayMemories.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

  Hi all
  My G30 (PQL32L) supplied with Windows MCE. It has preinstalled WinDVD Creator 2 and personally I install WinDVR 5 (application of part 3 came with my Plextor ConvertX PX-TV402U PVR).

  Problems:
  1 WinDVD Creator 2: failed to set the TV system. I plugged my video source via the video cable (yellow, white, red) provided and connected to the AV-in port. I chose TV on the HARD drive for the new project. Default WinDVD defined as NTSC but my TV system is PAL. Therefore, input video quality is blurry and cut in two. Once I changed the setting in the software of PAL, the video screen turned black and no response. I have no problem with Qosmio Player with the same configuration of the connection.

  2 5 WinDVR: Application can not start correctly (hang and cannot complete the program) I to my Plextor ConvertX PX-TV402U PVR TV source, then connect it via USB2.0 for G30. My ConvertX works in my office, but failed with the G30. The application cannot start properly and hung. No response yet I'm trying to complete the program, but the screen was always there. When I try to stop my G30 then Windows MCE hung at the "Closing Windows" screen. I have to stop by pressing the button. ConvertX being operation USB cable, it is not achievable in Qosmio.

  Can someone help to solve these or give advice?

  Fine thanks
  Samuel

  Hello

  I copied the film on my camcorder for Qosmio G30 (WXP MCE) without any problem and subsequently created the DVD using Ulead moviefactory program. I also tested it with VHS-recorder. Once again without any problem!

  My camcorder was connected with firewire cable and it has been recognized correctly. VHS-recorder was connected with the aerial cable simply. I was able to record sources using Qosmioplayer (it was just to test because I'm interested, how it works). Movie from VHS-recorder was also possible to record using Media Center Edition.

  I know I also tested it with pre-installed Win DVD Creator but camcorder has not been recognized as usual. If I remember well I put the TV source and that the camcorder is recognized correctly. To be honest I don't like this Win DVD Creator and I have not tested properly.

  So I would like to know what your video source and what you hear in AV-in port.
  Please tell me exactly what cable you use for audio/video data transfer and exact port on your Qosmio laptop?

• EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

  Salvation;

  I have a MSD 15.3.0 version and TMSXE 5.3,
  I have a wooded area, with:
  10.5.2.10000 - 5 CUCM
  PRESENCE 10.5.2.21900 - 4
  TMSPE: 1.7
  CONDUCTOR: 4.2
  NŒUDS EXPRESSAY: 8.6 (EXP-E clusters and cluster EXP - C)
  TELEPRESENCE SERVER: 4.2 (4.23)

  Salvation;

  When I create a new video conference using the SCHEDULER INTELLIGENT or CMR, an external user cannot stay in a conference, this connection is dropped after every seconds.  In my vts newspapers exist the message below, where information this close due failure invitations SIP call.

  274 2016/09/12 16:47:47.768 SIP Info call 10.254.0.30:42033
  "" 16:47:47.771 275 2016/09/12 call APP Info 21: incoming new SIP call of '[email protected] / * /"
  276 2016/09/12 16:47:47.953 calling APP Info 21: "FABIO 2s" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  277 2016/09/12 16:48:09.340 calling APP Info 21: stopped contributing video, now contribute audio only
  Time from NTP Info 278 2016/09/12 16:48:10.706 is my Sep 12 16:48:10 2016
  279 2016/09/12 16:48:16.058 SIP Info call 10.254.0.30:42033
  "" 2016/09/12 280 16:48:16.061 calling APP Info 22: incoming new SIP call of '[email protected] / * /"
  281 2016/09/12 16:48:16.098 calling APP Info 22: "Leonardo Silva" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  Appeal of error SIP 16:48:23.743 282 2016/09/12 22: close call due to failed invitations
  283 2016/09/12 16:48:23.743 call CMGR Info 22: disconnection, '[email protected] / * /"-service not available".
  284 2016/09/12 16:48:23.745 calling APP Info 22: shoot call them from "Leonardo Silva" - destroy at request end. not available
  SIP 16:48:23.835 285 warning call 2016/09/12 22: unable to close successfully the dialogue with BYE
  286 2016/09/12 16:48:31.937 call CMGR Info 21: disconnection, '[email protected]/ * / '.
  287 2016/09/12 16:48:31.937 calling APP Info 21: shoot call them "Fabio 2s" - destroy at request end. remoteTeardown
  

  I have check all information in othe Detective Conan in this forum: https://supportforums.cisco.com/discussion/12294701/telepresence-server-...

  I made recommendations, but with IX Protocol disable SIP PROFILE DRIVER and MEETING ALIAS, the same error occurs. My maximum size of incoming messages is updated to be 11000.

  Internal Conference is going on normally.

  Any idea?

  Best regards;

  Fabio Santos

  I've seen some similar behaviour in the past - on trunk SIP pointing to the highway, try to uncheck the "SRTP allowed" and see if it works.

• Video streaming via video-conference notebooks

  Hi all

  "I'm setting up a video conference to three places and I use the ' CTS-EDGE95-K9" for each of the sites.

  Now, they want to be able to communications stream video via laptops (at least 5 instead of the eact) in each of the three locations.

  Now it is possible with devices that it is? Or do I need to add additional devices?

  Also, how is assigned license here?

  Please this Advisor will be appreciated.

  Kind regards

  Peter.

  95 EDGE Codec offers an internal streaming server.

  The streaming service can be configured through the web interface of the system or the system itself.

  I don't know how many viewers continuous sleeps well.

  Details on the streaming service can be found in the Administrator's guide or the link below.

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11304/ps11313/ps11382/data_sheet_c78-628575.html

• I use Windows 7 and I have a special program analysis cod of soccer games by video sometimes entering this error

  I use Windows 7 and I have a special program analyzes football matches DARTFISH - cod by video sometimes entering this error

  I have this problem whit windows compatibiliti 7 and the dartfisch. Wenn I work is stoppend and windows write as ther a problem and stopped the program.

• I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know a fix or will be updated into the ligh

  I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know of a patch or upgrade to Lightroom 6 will fix the problem?

  Hey billo,

  Could you please check and confirm the version of Lightroom you use?

  What operating system do you use?

  ~ UL

• I have 12 PS elements and Premier elements installed on Windows 10. How do we install PSE 14 and 14 PE of DVDs so that the Organizer 14 will display photos and videos imported using 12 Organizer? I would also, continue to use PSE12 and EP 12

  I have 12 PS elements and Premier elements installed on Windows 10. How do we install PSE 14 and 14 PE of DVDs so that the Organizer 14 will display photos and videos imported using 12 Organizer? I would also, continue to use PSE12 and EP 12

  When you install a new version of the items, you are prompted to update the current catalog. Creating a new catalog with the data in the old. The new catalog has the same name as before and can be opened in the new version, the old catalog is unchanged, but renamed with a suffix-1 can be opened in the old version without any intervention on your part.

  If you do agree to the conversion prompt, you can do it later from the Catalog Manager; same for the other catalogues.

  Just be careful what you do in a catalog are ignored by the other, they cannot be updated by the other. This means that you will need to choose which version of catalog to choose to manage your files.

  In addition, I don't see a way to use PSE12 catalogs to edit in the PSE14 Editor.

• Should what product I use to create and present a series of modules with text, audio and video? As a super duper powerpoint?

  Should what product I use to create and present a series of modules with text, audio and video? As a super duper powerpoint?

  I think you could use DW, but it would be browser based and you need to understand a lot about html, css and javascript to do. Adobe Captivate seems closer to what you want: http://www.adobe.com/cfusion/search/index.cfm?term=buy+captivate&loc=en_us

  Is not part of the subscription of cloud creative and is 1000 US $ or $29.99 / month on its own...

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• video conferencing through vcs-e and vcs - c

  can I make calls using video conferencing devices using vcs - c and vcs - e only? or is cucm involved in the process? also if I set my camera to call using only H.323 and SIP disabled, can I call sip addresses? also if im calling via vcs - c and vcs-e do I need to implement natting to the local address of videoconferencing unit? Lastly can someone please link any document on how to set my vcs - c and vcs-e and my videoconferencing unit to send and receive sip and h323 calls.

  "can I make calls by means of video conference devices using vcs - c and vcs - e only? or is cucm involved in the process? »

  If there are termination points recorded on the CUCM and want to call the end points on the VCS, CUCM is involved in the appeal process as the call goes through the trunk SIP between CUCM and VCS. Even also on the endpoints registered on VCS if they call endpoints on CUCM.

  If end points locally stored on the VCS and making calls to another, CUCM is not involved.

  "also if I set my camera to call using only H.323 and SIP disabled, can I call sip addresses?

  Yes, so that interoperability is enabled on your VCS.

  "also if im calling via vcs - c and vcs-e do I need to implement natting to the local address of videoconferencing unit?"

  No need. The VCS - c and VCS - e will do their work for calls of crossing of firewall. Until the end point is stored on the VCS then an area between these VCS are enabled, you can join located outside the network of endpoints and they can also reach your internal termination points as well.

  The Cisco VCS Expressway and the VCS control - Basic Configuration will be the guide you're looking for.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-basic-configuration-control-with-Expressway-deployment-guide-x8-7.PDF

  Kind regards

  Acevirgil

• SX80 simultanius video conference

  Hi all, I have a question made media sx80 multiple videoconferences at the same time, for example, if my client wants 2 video conference independent of each other, the sx80 does very well. also without CallControl

  Video input camera--> Room1

  Video output--> Room1

  Audio--> Room1

  Audio--> Room1

  Video input camera--> Room2

  Video output--> Room2

  Audio--> Room2

  Audio--> Room2

  The SX80, like any other video conferencing end point (and regardless of manufacturing), may not pysically connected to a room at a time.  Cannot connect a single codec in several rooms, each with their own camera and microphones and have individual conferences for each room.  Your only option if you want each piece to be able to make Conference calls independent of each other is purchase and SX80 for each room or share the unique SX80 allowing only when using it.

• TMS Video Conference MAster API commands

  I have a scenario where we use the master setting of Video conference in TMS to try to set some parameters in a room that are controlled by a third-party controller.

  So if a site is the master we configure profiles as back camera on the monitor back on the sharing of specific content etc...

  I went through the document of the API to find answers, but I can't find what I'm looking for.

  When TMS books call all of this info stored locally on the codec before the beginning of the call?  So I could query codec to find out if he was master in the next cal...

  I found that the subject of conferences has the info I need, but I don't know how to access it.  I could go in and leave the data I need I think.

  My good that process would be to get the call ID once we first booked and updated the list of session on the codec, then go to the object of the reservation for this ID call and parse the xml file.

  I know it's weird but I am is my correct thought that there is a file object of booking for each call?

  HI Brandon,.

  If I understand your question, you can run the command on a TC endpoint:

  xcommand booking list

  This will provide information about the meeting, as well as the following line:

  * r BookingsListResult booking 1 role: Master

  If it is not master it will say slave

  Hope that answers your question

  Sebastian

• TCS recorded video playback using video endpoint

  Hello

  I've deployed a Telepresence from Cisco Content Server (TCS 5.3) and met with problem regarding on how to play videos recorded by video endpoint.

  Under modify records, I don't see an option or the option 'Make check-in available for play on the endpoints '.

  Referring on the Administrator's guide TCS it is said that "If this box is not on the page of registration of amendment, a site Content Server Manager has not configured the prefixes necessary to an alias of reading E.164 and H.323 reading ID to communicate with a site manager for more information. What does that mean?

  And where I can configure the reading reading alias/H323 ID?

  The TCS is registered as SIP and H323 (E.164) on the control of VCS.

  Recorded content have been updated with the recording of "publish".

  Thank you very much for the help.

  Best regards

  Acevirgil

  You must do the following:

  Key 'Premium résolution' option must be installed.

  Record configuration, see the Site settings, such as 'Bridge', not 'Terminal '.

  

  Enter the prefixes to use for recording, and also for playback, it may not be the same.

  Note that prefix of reading options will be unavailable unless the resolution option key Premium is installed.

  Also note the playback using the SIP is not supported at this stage.

  /Jens

  Please rate the answers and question 'Answered' mark as appropriate.

• Gateways and telepresence SX Gatekepers

  Hello

  I design a service project of video-conference with a client with 16 sites, one a seat.

  I decided to go with the codec of telepresence sx 20 or 80.

  Since this is my first project in collaboration with cisco, I need to consult certain documents or information on this implementation requirements. With the exception of telepresence, I need to know if I need to access the network controller, gateways.

  I saw somewhere that gatekeeper is optional. Means that a guard is not necessary for the translation of control and signal address?

  Can someone give me the minimum requirements for the network, network equipment, necessary roles for this implementation?

  Thank you

  Julian

  Hi Julian,.

  Allow me to pass this message to the community of telepresence to join the appropriate group of experts to help you.

  I hope this will help you get faster responses.

  Dejan