Conference of ad-hoc using telepresence virtual server and conductor

Similar Questions

• installation of Peoplesoft using an application server and a database server

  IAM installing Peoplesoft on windows 2008R2 64-bit. I've had the Installer (combinations) of the matrix must be installed. I did a successful installation on the server test and its job very well. Now I have to make an installation on the production environment and in the production environment we use a 64-bit application (1 machine installed with windows 2008R2) server and a database server (1 machine installed with windows 2008R2) 64-bit words, we have two separate servers. So will there be additional tasks or settiings who have to do the installation. Thanks for giving me the details.

  As long as the basic connectivity works between servers, there is not particular to do things.
  If you do not plan to run components as CHRP (*) Peopletools on the database server, you will not need to install PeopleSoft (Peopletools nor) on the database server. In any case, it's much better to avoid the DBWizard of production database, manually creating db will be much closer to your expectations.

  Nicolas.

  Process Scheduler (*)

  Published by: Gasparotto N November 3, 2010 09:50

• A limit to the reentrant instances run using the VI server and asynchronous call?

  I have an application that attempts to launch many incoming preallouees clones using the server of VI with asynchronous call to start. I find that it seems to be an upper limit on the amount of clones that can be run by using this method. 26 Nations seem to run and then in addition more clones are laid but they seem to be just sitting here do not run. I confirmed this behavior by all launch on the performance front panels.

  Is there something I'm missing here?

  You use option 0 x 40 incorrectly.   That allows you to create a pool of clones and aims to created that only once (I ran up to 10000 clones with a reference using 0x40).  If you want a clone by reference, then just use 0x80.

• Licensing of Port on a MSE8000 can be converted to a virtual server of TP?

  I have a client with a MSE8000 with 80 port licenses and 2 x 8420 blades.

  They would like to go virtual; is there a provision for transforming these port licenses screen for a telepresence virtual server licenses?

  Thank you

  David

  The only way that you can convert the MCU licenses Telepresence license server is if you have a 5300 MCU series or MCU MSE 8510 blade, and it is through the process of installing the server TP on the MCU software, because the hardware can support.

• Can I create a static IP address for my virtual server when my physical network only has a dynamic IP address?

  Hi all!

  About, what I'm trying to do is to create an entire virtual network. I'm working on and studying for my MCSE and wanted to create a virtual server and a few virtual desktops.

  I wanted to put up a few roles on the server which (sort of) requires me to have a static IP address. My question is can I create something like a "static IP address make fun" to do?

  I prefer not to pay the additional sum of $ my ISP for a static IP address if I have to. Other than this virtualization project, I don't need a static IP address.

  Thank you!

  Create and internal network, then NAT so they can talk to the internet.

• Conductor with virtual TP and CUCM

  Hi all

  I deployed a telepresence system with:

  -CUCM 02.

  -Telepresence 01 conductor.

  -01 telepresence virtual server.

  Through this guide, I have configured:

  -SIP Trunk of CUCM TP driver (Rendezvous) and model of routing to make call.

  -Bridge Conference and conference bridge pools, Conference

  -Models Conference and conference alias.

  -L' user to connect.

  -Add TP CUCM license; touch, call session for conductor; STM license screen.

  My test scenario:

  -01 camera SX10 call to conference by routing model 6188 list road bridge room is 'Rendezvous_Trunk'.

  -In the conductor, make "Rendezvous meeting" of the alias(6) @.*'-'\1.rendezvous_mtg'withHD Servicemodels.

  "HD Service" have Conference bridge "To_VTS".

  State of the link/trunk:

  -Trunk of CUCM TP Condutor:Time up: 0 days 1 hour 29 minutes.

  -Bridge Conference in TP driver: permits and status: active.

  But the call cannot be successful with the message 'your call cannot be completed as composed. Please check your phone book and call again, or ask your operator for assistance.'

  I see that it connects VTS:

  280 Conference APP Info '6188.rendezvous_mtg' 08:23:13.256: deleted via API (not of participants)
  279 08:22:21.505 Conference APP Info '6188.rendezvous_mtg' created

  And the TP driver has 3 alarms:

  - Conference bridge is missing the function of encryption key: one or more conference bridges lacks the function of encryption key. This is required for all driver telepresence B2BUA links.
  - Warning of telepresence Server license resources: use of the licenses of individual server of telepresence is close or has reached its full capacity
  - Resource server telepresence pool license warning: license server of telepresence pool use is close or has reached its full capacity

  I miss encryption license, time in the head of the Orchestra and STM even not (because the STM using GMT time and cannot change his).

  Any help is appreciated.

  Thank you and best regards,

  Thanhduytran

  Hello

  Driver Telepresence Unified CM deployment guide x.24

  on page 17, you can find concerning the encryption key

  Task 8:
  Installation of an encryption key
  The telepresence server has the ability to use a secure communications connection. These security features are enabled with the option of encryption. You must install the option key so that this deployment to work.

  This is related to the mechanism how conductor and TP server communicate with each other. He can't speak SIP secure (TLS).

  We tested it in our lab, without encryption key, that it did not work.

  If you can ask cisco, let them meet and share their response

  HTH

  Anas

  don't forget to note the useful messages

• Discovers server and firewall security problems

  I throw myself to everyone thank you.  After 4 days of trying to get the firewall configured for my security server, still no joy.

  Unfortunately, the firewall management is outsourced and I can only ask to put rules in, but have no way to see if they are actually there or whatever it is in conflict.

  I put "sniffer" on the Security Server, the connection to the virtual server and the client.

  What I see is that the client connects and request the credentials, the credentials are passed to the desktop computer - if I am connected to the desktop computer, I get the hang.  But I get a white screen at the level of the customer and after about 30 seconds, it says it is disconnected.

  I can connect to the desktop computer using HTML, but not the full client.  On the "sniffer" I see no traffic on port 4172 on the boxes.  4172 is open for UDP and TCP on the front and backend firewall.

  Is there anywhere I can look, newspapers etc. to see what happens or does not happen in this case?  We have opened the ports for MMR and USB - R.  Essentially followed the right document on vmware pubs for security in the DMZ server - but I have some ideas on where to find the next.

  I use a Mac client to connect to it... it is anyway seen 5.3, according to me, the last version 5.x.

  If someone could give me some advice on where to find other than the firewall, or the sequence of the connection so that I can check with the sniffer which is getting blocked and what is not get thru, I would appreciate it a LOT.

  Thank you

  Bill

  It depends on if you have configured tunnel. Check your settings in SS and CS for tunneling. If you all tunnel then you should see the traffic pass customer <->ss <->cs <->agent otherwise he might go customer <->ss <->agent

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• How to use the second server virtual router?

  Hey guys. I have a basic configuration to the House. ISP-ISP-router and my host pc. I want to be able to separate my virtual network on my home network. I have a second cisco router (WRT320N). I also have two network cards integrated with my motherboard. Now, is it possible to use the secondary router for my virtual server for my test environment?

  So far, I connected the external port of the ISP router on the internal port of the router Cisco-for the basic configuration. I guess, I need to connect the secondary of my host network adapter to the router cisco-but then, I do not know how to configure vmware to use secondary nic as NIC default.

  Any help is appreciated.

  Thank you

  Right, I found the solution, but I thought I'd share it for people who do not know.

  Router installation as follows:

  ISP-router to Host (NIC_1) to the host (192.168.0.1) connectivity

  ISP-router-Cisco-router (Internet Port) (192.168.1.1)

  MUST be on different subnets

  Cisco-router to Host (NIC_2) (in the NIC_2 adapter properties, all checkboxes except VMware Bridge Protocol MUST be deselected HOST, so please use NIC_2)

  VMware, Virtual Network Editor, full of connection Type must be selected as MANUAL that points to your NIC_2

  AND

  the parameters of the Virtual Machine to the network card, ' Custom: specific Virtual Network ' should point to NIC_2.

  This will allow you to use your second NETWORK card for your virtual machine (but the MAC address will be assigned by VMware... does cause no problem at all)

  Your virtual, in my case, Windows Server 2008 R2 operating system, will be no connectivity until you assign a static TCP/IPv4 address.

  This will isolate your virtual network on your home network.

  I hope this helps the other.

• Impossible to use VMWare Server and Virtual PC at the same time?

  I have a Win 7 box I use VirtualPC (unfortunately, VPN to the employer only supports the 32-bit Win XP).

  If I try to start any virtual machines using VMWare Server, power on and then immediately off.  Tried several different VMs.

  However, if I disable VirtualPC, they all work normally.

  Then... there at - it a known issue with the help of Virtual PC and VMWare Server at the same time?

  BTW, I didn't see this problem when you use Virtual PC and VMWare Player at the same time.

  VirtualPC leaves the CPU of the exploitation of VMX root, which is a restricted mode.  VMware Server is problems to switch between legacy mode and long (this switch is prohibited when the CPU is in VMX root operation).  The current versions of the workstation and the player are able to circumvent this restriction.

• You can convert a virtual server on a single machine in VMware Server on another computer using ESXi?

  Here is my scenario:

  Machine 1

  Server5 - host VMware Server 1.0.6 version

  Is within Server5 Server6 running on VMware Server & Server7

  Machine 2

  Created an ESXi Server

  I want to one Server11 newly created on the ESXi machine be Server7.

  All machines are running MS Server 2003 R2 SP2

  I tried using the conversion tool and get an error message "actively denied connection to the target computer.  I tried all the possible scenarios regarding the installation of conversion on each machine tool.  I made sure that telnet runs on both machines.  I found little or no information on this error message on the VMware site.  Is there a better way to convert this virtual machine that use the conversion tool?  It sounds simple enough, but I'm obviously missing something.  Thanks in advance.

  Stand-alone installation of converter on the host that is running Server 1.0.6.  http://www.VMware.com/download/converter/

  Turning off 6 Server and Server 7.

  In the first step of the Converter Wizard, select the option for an engine off the coast of the virtual machine.  This should allow you to select the VMX file using a button 'Browse '.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How can I determine if a virtual server using PowerCLI (powershell)

  Hello

  I'm looking for a way to use PowerCLI to check if a Windows Server is virtual or physical.  What I want to do is the following.  When I apply the patches to Windows I want to run a powershell script to check if the server is virtual or physical.  If the server is a virtual server so I would like to take a snapshot of the server and then apply patches.

  Any help appreciated,

  Dean

  Dean,

  You can use the cmdlet Get - VM PowerCLI to check if the server virtual or physical. If the server is virtual the cmdlet returns an object. If the server is physical the cmdlet will give an error and returns nothing. Something like:

  $vm = Get-VM YourVmName
  If ($vm) {
    New-Snapshot -VM $vm -Name "Before Patch"
  }
  

  Robert

• Configure the virtual server to 2003 to use two physical network adapters on the host

  I have a virtual server (Server 2003) that I'm trying to point two virtual NETWORK card to two different physical NICS on the host computer.  The two network adapters on the host are on separate networks, and I can't get virtual network cards to connect properly.

  I use VMWARE Server 2 with the virtual network manager.  All good instructions would be greatly appreciated.

  Thank you

  Run the virtual network Editor.  Disable the automatic bypass.  Then, specify which of your physical NIC to the bridge to VMnet0 and specify the other physical NETWORK adapter on one of the switches (2-7, 9) unused VMnet.  In the settings of your virtual machine, select a virtual NETWORK adapter to be filled, and a 2nd we use custom connection and specify what VMnet switch to use (the one you filled the 2nd NETWORK card physical to).

• Don't know which one to use, virtual server or ESXi

  I have a couple of Windows server running on IBM e series.  They do not work with heavy loads so I thought to bring together them.  I used Virtual Server 1 x front on my desk and loved so I thought to use it, but now that ESXi is available I want to understand if this is a better option.

  I know that ESXi will run the VM faster and uses fewer resources, but from what I read, it seems that it is not as easy to manage.  Everyone notes that the console is difficult to transition to?  Furthermore, what about backups?  For example, if I want to make a snapshot I can run and copy off in my NAS box, but it seems that you cannot directly access the VM ESXi files.  Is this correct?

  Thank you

  Steve

  For example, if I want to make a snapshot I can run and copy off in my NAS box, but it seems that you cannot directly access the VM ESXi files. Is this correct?

  A snapshot is not a good method of backup, and this isn't how it should be used.  A snapshot preserves the State of a virtual machine that allows you to make changes and revert to a previous state if you need to.  Should not be considered as an alternative to long-term backup.  That's why you have to VCB.

  ESX 3i is very easy to manage, the hardest part is not console, so you can not do operations on the host easily, but you can copy files from ESX via the data store.  While ESX is more suited for very large like VM 15 guests or more, and if you are not running a very high load and not many VM VM Server will work fine.  There isn't really a difference in performance between any virtualization product until you start to reach the breaking point.  ESX can accommodate dozens of virtual machines on a computer, is there that ESX is really profitable (and I know that ESX 3i is free) but pound for pound can match VM Ware ESX Server 3i for small host environments, and given that it's windows it does not have a lot to manage.