"No Country" when you try to order calendar

Similar Questions

• "Not enough memory is available to process your order" when you try to install the drivers

  Recently, I have problems when you try to install the drivers for a USB mouse that I have. When I plug the mouse, it detects it and tries to install the software but it gives me an error saying he found the software but can't install it because "not enough memory is available to process your order."

  I spent a bit of time, search tries to find a solution to this problem, and I tried a lot of things without success.

  I tried the things:

  -Manually installed the drivers. While I can install them, Windows does not recognize the drivers as being installed and the mouse still not working.

  -The fix IRPStackSize. It was not in the registry, so I thought this might be the solution, but it does not solve my problem.

  -Troubleshooting and repair of Windows Update. I had a memory leak problem with Windows Update, so I thought fix which would cure the problem. I was able to d/l an update that corrects this problem, but it does not solve the driver problem.

  Anyone have any ideas on how to solve this problem? Thanks in advance.

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us informed.

  Thank you

• When I try to order a Photo book...

  When I try to order a photo book, it says "country not supported. Orders must be shipped in your billing country', but the United Kingdom is my billing country. My apple ID must be registered in the United Kingdom. I have a valid credit card that is registered in the United Kingdom. I don't understand what the problem... I spent all weekend, making this miserable book. It is cruel and unusual punishment!

  Can anyone help?

  Massive applause

  David

  David...

  Try here > https://help.apple.com/photos/mac/1.0/?lang=en#/pht211dd6d0

  You can contact Apple directly on Twitter: @AppleSupport

• I get "an error occurred, please try again later" when you try to view videos youtube on Firefox, but no problems on Chrome

  I get the error: "year error has occurred, please try again later" when you try to view videos youtube on Firefox.
  I tried to use Google Chrome and everything's good about it.

  Things I've tried:

  • Clearing cookies, history etc.
  • Removal of cookies.sqlite
  • Re-installed a new Firefox
  • Re-installed Flash Player 14
  • Get rid of Flash Player 14 and returned to Flash Player 11

  None of this has worked.

  I get the error for all videos to youtube every time, it is not a random phenomenon.

  I'm really frustrated by it because Firefox is my favorite browser and now I am forced to switch to Chrome.

  If you live in India then see:

  • http://www.medianama.com/2014/07/223-World-Cup-2014-472-websites-including-Google-Docs-blocked-in-India-following-Sony-complaint/
  • http://www.nextbigwhat.com/Delhi-High-Court-orders-block-Google-Docs-several-websites-297/
  • http://delhihighcourt.NIC.in/dhcqrydisp_o.asp?PN=119642 & YR = 2014

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• Impossible to download and install KB 948465.Error code 80070570. Problem started when you try to install a package of new McAfee after uninstalling old. Also unable to follow the links in the e-mails. I tried the system restore.

  I can't return Macafee for them to help me

  When you uninstall McAfee, it often leaves remainders you need the tool to remove.

  You will have to contact McAfee yourself.
  Take the phone Option!

  It is a separate link under the Chat/email link.

  Click on 'Customer Service phone' > put to the United Kingdom as country > phone number > Contact McAfee
  
  
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/948465

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=cc98f6bd-50b3-45f5-a40f-df9bfb708d11&cat=en_US_56d1dd45-de9e-4fc5-9bc1-2d1d0de6daee&lang=en&cr=US&sloc=&p=1

  Read the info at the link above.

  If the above does not, Windows Update issues:

  Windows Update Forum:

  This is the recovery and repair of Vista Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• "An error occurred" appears when you try to burn a CD

  After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column).  CD were burned on this same burner, but I did not burn in about three months. Any suggestions?

  Hello

  ·        Do you have any third party burners installed on the system?

  ·        What is the exact error you get when you try to burn the CD?

  ·        You are able to use the CD drive for playback of the disc?

  I suggest you to try with another CD and check if you're able to burn or not.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Apart from that, I suggest you follow the steps mentioned in the article below.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• I get "file exists" when you try to open a session to Quickbooks pays.

  Original title: Windows error message

  When you try to log in to Quickbooks don't pay I get an error message

  "the file exists." The error message is still displayed. I have to go into the Task Manager to stop the program.

  Hello

  You can follow the article below in order to solve the problem.

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1011639

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message when you try to change startup programs

  Received error 0x800705b4 trying to 'change the startup programs '. When you try to change my startup programs, I got a message that Windows Defender is disabled. When I click on the button to turn on the Defender, I get the message "Microsoft Defender encountered an error: 0x800705b4.» This operation completed because the time-out period expired. "What can I do? I uninstalled Microsoft Security Essentials, because I understand it turns off Defender and then I could change my startup programs, but after that I have re-installed Microsoft Security Essentials, it wouldn't let change me.

  Hello

  MSE, AVG, McAfee, Norton disables Windows Defender program.

  Is the proposed action and nothing to worry about.

  To change startup on Vista via 'msconfig' programs is included in this connection method 2:

  "How to check and change Vista startup programs"

  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  And this free Autoruns program is very good for what you want to do:

  «This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows.» These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  Autoruns' hide signed Microsoft entries allows you to zoom in on images of automatic start of third parties who have been added to your system and it has support for looking at images of Autostart configured for other accounts configured on a system. A command-line equivalent that can display in format CSV, Autorunsc is also included in the download package.

  You may be surprised how many executables are launched automatically! »

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.