No data to USD not total level

Hello

I have a question, the ican see to 'currency entity' and the level of "currency of the Total entity." But when I open it at the level of USD (Parent), it appears not all data for a given entity. I can see the data for other entities under the same parent. I compared the properties of this entity with other entities, they are same. Any ideas appreciated.

Because the currency is not translated to parent. I chose all the value corresponding to this entity dimension members and not 'translate' manually. It's working now.

Thank you for you answer.

Tags: Business Intelligence

Similar Questions

  • Entry not allowed data in HFM to basic levels

    Hello

    I created a new HFM application and all metadata successfully support.
    But at levels of base data forms do not allow for any input data.

    The only point where entry is allowed is at the intersection of [NONE] for all dimensions (on POV for accounts, entity, all custom 4), < entity currency > CDA to view dimension and [YEAR] value in period (which is in fact a monthly roll!). The default frequency for the scenario is for a YEAR.
    None of the months when taken into POV, allow data entry.

    All the world is facing this issue or can give the solution for this problem please

    Rgds
    Maury.

    What you need to do is to define the default frequency of senario and default frequency ICT as periodicals. Then you will be able to load data at the level of the month.

    Hope this fixes your problem.

    Nick

  • of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

    media center ehshell.exe received the error message 205 units

    of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

    After you have installed the XP SP3.

    How can I fix this error.

    Media Center worked fine until I installed SP3.

    Hello

    I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

    Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

    (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

    (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

    (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

    (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

    If the problem persists, follow these steps:

    You try to run the following commands to re-register all Media Center services:

    (a) close Media Center

    (b) click on the start menu, choose run and type cmd , and then press ENTER.

    (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

    · Regsvr32.exe atl.dl

    · C:\WINDOWS\eHome\ehl Sched /unregServer

    · C:\WINDOWS\eHome\ehSched/service

    · C:\WINDOWS\eHome\ehRecvr /unregServer

    · C:\WINDOWS\eHome\ehRecvr/service

    · C:\WINDOWS\eHome\ehRec.exe /unregServer

    · C:\WINDOWS\eHome\ehRec.exe/regserver

    · C:\WINDOWS\eHome\ehmsas.exe /unregServer

    · C:\WINDOWS\eHome\ehmsas.exe/regserver

    · Restart the Media Center

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • Is not Table-level logging a sine qua non for replication?

    GG version 11.2.1.0.3
    RDBMS Version: 11.2.0.3 (Source and target are the 11.2.0.3 version)
    OS: RHEL 5.4


    After the first load using expdp, experimental using GoldenGate we are replicating the LMD of 5 tables (Uni-directonal) from the source to the target.

    DB level additional logging is enabled in the source.
    SQL> select SUPPLEMENTAL_LOG_DATA_MIN from v_$database;

SUPPLEME
--------
YES
    We have not activated level table for these tables using the ADD TRANDATA command as
    GGSCI > add trandata SCOTT.EMP
    He checked by running
    GGSCI (cbrdf2) 2> info trandata SCOTT.*


Logging of supplemental redo log data is disabled for table SCOTT.EMP.

Logging of supplemental redo log data is disabled for table SCOTT.XXX.

.
.
    But replication works without any problem. Then, is not table-level logging a sine qua non for replication?

    Only one of the logging method above is sufficient?

    Database-level logging is minimal logging necessary to capture updates to PK columns. For your INSERTIONS and deletions will get replicated, even if at the level of the array logging is not enabled.
    However, updates of non-PK columns will not be get replicated if the level table record is not enabled.

  • Verifying plugins to make sure that I have the most up to date, I'm not having any luck all do is just turning a black circle?

    Verifying plugins to make sure that I have the most up to date, I'm not having any luck all do is just turning a black circle?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • Why do write can not be performed because the number of data channels does not match number of channels in the task.

    Possible reasons:

    Scripture cannot be performed because the number of data channels does not match number of channels in the task.

    When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

    Number of job channels: 8
    Number of data channels: 1

    Lama says:

    The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

    You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

    (If your car does not work, you bring car your wives to the mechanic, right!)

    What is the exact text in the multichannel 'physical channels' when you do the AO control?

    Lama says:

    I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

    All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

    First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

    A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

  • [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

    Hi team,

    I am trying to connect to the Oracle 9i database using VB code below:

    strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
    Connect = New ADODB. Connection
    Connect.Open (strConnection)

    The last line throws me below error:

    [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

    The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

    The servers are Windows server 2007-32 bit.

    When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

    Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

    Considering that the UAT server has entered below:

    Microsoft ODBC for Oracle-

    The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

    Kind regards

    Tamil

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • cell data cable is not recognized

    Trying to download pictures from my cell phone (Sam-sung Gravity 3), but my data cable is not recognized by my table.

    Hello

    1. the other USB devices work properly?

    2. what version of Windows is installed on the computer?

    If other USB devices are working properly, then I suggest you to contact Samsung for more support.

    Otherwise, try this troubleshooting and check if it helps:

    For Windows7:
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    For Windows vista, try this fixit:
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    It will be useful.

  • Printer inkjet HP Photosmart 8030 - software won't install - printers work somehow, but not totally

    HI-World, compaq HP does not have software for printer HP 8030, works of printers in some respects, but not totally

    concerning

    johnlewisTT

    Do you mean ' will not accept '? What do you mean "works in some ways, but not totally.

    What support HP should say when you contacted them?

  • The Windows Easy Transfer of data application does not work if there are two windows of different language.

    I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
    but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
    Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.

    No, it doesn't work of course between the various language versions, has never and will never be.  Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year.  Save and move documents using a different method.

  • WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

    Original title: wmp 11 will not play my dvd digital downloads

    iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

    Hi alfredDAVILA,

    ·         What is the format of the file?

    Follow the steps in the article.

    You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

    http://support.Microsoft.com/kb/926373

    For reference:

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

    Windows Media Player 11 cannot read content protected by DRM on Windows Vista

    http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

  • the windows boot configuration data file does not contain a valid entry os

    Hello

    I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

    the windows boot configuration data file does not contain a valid entry os

     


    How do I solve this problem

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

    Images of Windows 7.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software you may need are located by entering your full model number or Nr here.

    Kind regards

    DP - K

  • given the date and time not set when computer starts. also have a problem with typing

    by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

    on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

    You may have a failed in your motherboard CMOS battery.

    It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

    They cost about $5 to replace.

    http://www.computerhope.com/issues/ch000239.htm

    How to replace the CMOS battery in the above link info.

    See you soon.

    Mick Murphy - Microsoft partner

  • How will I know that my bios is up to date and if not how can I update

    How will I know that my bios is up to date and if not how can I update

    For any questions about the Bios, contact the manufacturer of your computer if Vista was preinstalled, or the manufacturer of the motherboard if you have built your own system...

    BIOS issues outside of these Forums.

    See you soon. Mick Murphy - Microsoft partner

  • Group data model does not

    Hello

    I am developing a revision update for my app BB10 stunts and I use a data model to pull in the elements of the application do not forget; the only problem I encounter is that I can't get the data model of the group work so that I can arrange the items by the first character instead the data are currently presented as Z - A, even if I could get it to display in A - Z would be enough, but what I am looking to achieve is to get the model to display in A - Z and then sort by the first character, while a header for each letter is displayed.

    Here is the list (QML) and my data model (C++)

    ListView {
                            dataModel: _noteBook.model

                            listItemComponents: ListItemComponent {
                                type: "item"

                                StandardListItem {
                                    title: ListItemData.title
                                    description: ListItemData.status
                                }
                            }

                            onTriggered: {
                                clearSelection()
                                select(indexPath)

                                _noteBook.setCurrentNote(indexPath)

                                _noteBook.viewNote();
                                navigationPane.push(noteViewer.createObject())
                            }
                        }

    NoteBook.cpp

    #include "NoteBook.hpp"

#include "NoteEditor.hpp"
#include "NoteViewer.hpp"

#include 

using namespace bb::cascades;
using namespace bb::pim::notebook;

//! [0]
NoteBook::NoteBook(QObject *parent)
    : QObject(parent)
    , m_notebookService(new NotebookService(this))
    , m_model(new GroupDataModel(this))
    , m_noteViewer(new NoteViewer(m_notebookService, this))
    , m_noteEditor(new NoteEditor(m_notebookService, this))
{
    // First Character grouping in data model
    m_model->setGrouping(ItemGrouping::FirstChar);

    // Ensure to invoke the filterNotes() method whenever a note has been added, changed or removed
    bool ok = connect(m_notebookService, SIGNAL(notebookEntriesAdded(QList)), SLOT(filterNotes()));
    Q_ASSERT(ok);
    ok = connect(m_notebookService, SIGNAL(notebookEntriesUpdated(QList)), SLOT(filterNotes()));
    Q_ASSERT(ok);
    ok = connect(m_notebookService, SIGNAL(notebookEntriesDeleted(QList)), SLOT(filterNotes()));
    Q_ASSERT(ok);

    // Fill the data model with notes initially
    filterNotes();
}
//! [0]

//! [1]
void NoteBook::setCurrentNote(const QVariantList &indexPath)
{
    // Extract the ID of the selected note from the model
    if (indexPath.isEmpty()) {
        m_currentNoteId = NotebookEntryId();
    } else {
        const QVariantMap entry = m_model->data(indexPath).toMap();
        m_currentNoteId = entry.value("noteId").value();
    }
}
//! [1]

//! [2]
void NoteBook::createNote()
{
    // Prepare the note editor for creating a new note
    m_noteEditor->reset();
    m_noteEditor->setMode(NoteEditor::CreateMode);
}
//! [2]

//! [3]
void NoteBook::editNote()
{
    // Prepare the note editor for editing the current note
    m_noteEditor->loadNote(m_currentNoteId);
    m_noteEditor->setMode(NoteEditor::EditMode);
}
//! [3]

//! [4]
void NoteBook::viewNote()
{
    // Prepare the note viewer for displaying the current note
    m_noteViewer->setNoteId(m_currentNoteId);
}
//! [4]

//! [5]
void NoteBook::deleteNote()
{
    m_notebookService->deleteNotebookEntry(m_currentNoteId);
}
//! [5]

bb::cascades::GroupDataModel* NoteBook::model() const
{
    return m_model;
}

QString NoteBook::filter() const
{
    return m_filter;
}

//! [6]
void NoteBook::setFilter(const QString &filter)
{
    if (m_filter == filter)
        return;

    m_filter = filter;
    emit filterChanged();

    // Update the model now that the filter criterion has changed
    filterNotes();
}
//! [6]

NoteViewer* NoteBook::noteViewer() const
{
    return m_noteViewer;
}

NoteEditor* NoteBook::noteEditor() const
{
    return m_noteEditor;
}

//! [7]
void NoteBook::filterNotes()
{
    NotebookEntryFilter filter;

    // Use the entered filter string as search string
    filter.setSearchString(m_filter);

    const QList notes = m_notebookService->notebookEntries(filter);

    // Clear the old note information from the model
    m_model->clear();

    // Iterate over the list of notes
    foreach (const NotebookEntry ¬e, notes) {
        // Copy the data into a model entry
        QVariantMap entry;
        entry["noteId"] = QVariant::fromValue(note.id());
        entry["title"] = note.title();
        entry["status"] = NoteViewer::statusToString(note.status());

        // Add the entry to the model
        m_model->insert(entry);
    }
}
//! [7]

    NoteBook.hpp

    /* Copyright (c) 2012, 2013  BlackBerry Limited.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

#ifndef NOTEBOOK_HPP
#define NOTEBOOK_HPP

#include 
#include 
#include 

#include 

class NoteEditor;
class NoteViewer;

/**
 * @short The controller class that makes access to notes available to the UI.
 */
//! [0]
class NoteBook : public QObject
{
    Q_OBJECT

    // The model that provides the filtered list of notes
    Q_PROPERTY(bb::cascades::GroupDataModel *model READ model CONSTANT);

    // The pattern to filter the list of notes
    Q_PROPERTY(QString filter READ filter WRITE setFilter NOTIFY filterChanged);

    // The viewer object for the current note
    Q_PROPERTY(NoteViewer* noteViewer READ noteViewer CONSTANT);

    // The editor object for the current note
    Q_PROPERTY(NoteEditor* noteEditor READ noteEditor CONSTANT);

public:
    NoteBook(QObject *parent = 0);

public Q_SLOTS:
    /**
     * Marks the note with the given @p indexPath as current.
     */
    void setCurrentNote(const QVariantList &indexPath);

    /**
     * Prepares the note editor to create a new note.
     */
    void createNote();

    /**
     * Prepares the note editor to edit the current note.
     */
    void editNote();

    /**
     * Prepares the note viewer to display the current note.
     */
    void viewNote();

    /**
     * Deletes the current note.
     */
    void deleteNote();

Q_SIGNALS:
    // The change notification signal for the property
    void filterChanged();

private Q_SLOTS:
    // Filters the notes in the model according to the filter property
    void filterNotes();

private:
    // The accessor methods of the properties
    bb::cascades::GroupDataModel* model() const;
    QString filter() const;
    void setFilter(const QString &filter);
    NoteViewer* noteViewer() const;
    NoteEditor* noteEditor() const;

    // The central object to access the notebook service
    bb::pim::notebook::NotebookService* m_notebookService;

    // The property values
    bb::cascades::GroupDataModel* m_model;
    QString m_filter;

    // The controller object for viewing a note
    NoteViewer* m_noteViewer;

    // The controller object for editing a note
    NoteEditor* m_noteEditor;

    // The ID of the current note
    bb::pim::notebook::NotebookEntryId m_currentNoteId;
};
//! [0]

#endif

    If something you can help me with then this would be very useful - if you need to see more of code then let me know too!

    Thanks in advance

    Try to add in constructor (after a call to setGrouping):

    QStringList keys;
    key<>
    m_model-> setSortingKeys (keys);

    May require alterations, I have not tried this compilation.

Maybe you are looking for