No default value customer Email for reader

Similar Questions

• Keep .dng 'original version' AND fitted... or just go back to the default values of CR for condition "original"?

  As with everyone, my needs of file space is growing rapidly.  So, fmy workflow, from my camera or I intend to keep the .jpg and .cr2 (Canon) converted .dng as my 'original' files (and then discharge the .cr2).  I'm then take the .dng in camera raw and create a .psd to work on.  This .psd would become the finished product I'll which keeps along the version of it .tiff and .jpg w/a. (Total of 5 files)

  Initially, I was going to keep both the original .dng AND the .dng after setting in Camera Raw (except w / IS hosted in Bridge)- but in the interest of some clutter I thought I could save rather only the .dng adjusted.

  In this way I would have saved my settings, but if I ever wanted to "start from scratch", or try another round for file treatment, I could just make a copy of the adjusted .dng and reset everything to 'default' in Camera Raw to make the file (I think...) just as it was right after the .cr2-> .dng conversion.

  Is there a major/critical flaw in this plan?  I don't want to start doing this and then later discover 1,000 images that I forgot something I shouldn't.

  Climb steep wrote:

  Is there a major/critical flaw in this plan?  I don't want to start doing this and then later discover 1,000 images that I forgot something I shouldn't.

  Well, you know that Camera Raw has the ability to store snapshots, right? So when you are finished with an image, you can save a snapshot, so you can keep a record of the settings of the image. You could then also be a snapshot of the "Defaults" Camera Raw will in essence be what you set as the default for your camera...

  But no, as long as you are sure that you will _NEVER_ need to use the camera raw processing software makers, recording on a DNG with your shots must not present a technical problem on the road...

  Except perhaps that this continues to get better and better so your PSD stuff was perhaps advanced given the treatment of today, the next version of Camera Raw may be able to produce better results. You are under no obligation to reprocess your images once you are done with them, but good to know you can if you wish...

• The value customer Email Messaging web site

  IdeaPad a-1

  I need to set the primary e-mail address to a web site on Google, the high school e-mail client.

  Seems I have to put in a standard form of the e-mail address and can not put in a URL.

  In primary school, I mean I want to reach Email and have this site to come.

  Any help is appreciated!

  Ron

  http://www.PCAdvisor.co.UK/how-to/Google-Android/3447950/add-bookmarks-home-screen-in-Android/

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• Restore the default value from the drop-down list

  Hyperion Inreatctive reports.

  I have an embedded in a dashboard report.  I drag the lists that filter the report.  Filter feed results and it works fine.

  I want to put a command button on the dashboard that restores the default values from the dropdown lists.  I have a selection in each drop-down menu, 'all '.  "All" is the default value.

  For example, for the year

  drop_Year

  for the region:

  drop_Region

  What command should I put on the command button that any value is displayed in the drop-down lists of this command, restore it to "all"?

  
  

  Watch the Select() method

  w

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• How to set a default email for the reader client?

  How to set a default email for the reader client?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  In the section in the preferences e-mail accounts.

• Default value is evident in textbox for data entry

  Hello everyone.  I am building a form of contract farming for a customer.  Here is a picture of high level of form for discussion:

  Operating agreement (object label for the title of the form)

  By signing this document, you agree to all of the language indicated on the following pages. etc. etc. etc. (label object for the static text)

  Name of the customer (text object for data entry)

  Address (text object for data entry)

  City (text object for data entry)

  State (text object for data entry)

  Article 1 - this agreement is between the customer, as indicated above and the company providing, etc. etc. etc. (object label of static text)

  Question 1

  By the request of the customer, I removed the label from the name text box of the Client (as well as all the other text boxes).  Want me to set the default value of this to say 'Customer name' indicating that the customer name text box must be typed here.  I've added the phrase name of the customer to bristle reversal as well help.  So we do not weigh those filling out the form, I added a line of JavaScript on the Enter event , so the default text in this text box is removed when the user clicks the text box to enter data.  The code I used is: this.rawvalue = "";  

  This solution works very well because we do not want those filling in the form of having to select and delete the default of 'Customer name' when they want to enter data.  Thus, with the JavaScript in place by default is removed after clicking in the textbox control.  The only problem I have with this solution is that if a person would click in this text box after entering the data or tabs in the text box after you enter the data, the data that has been entered is deleted (for the code).  Does anyone know how to set a default value that clears when the user enters in the text box for entering data, but does not erase what the user types in if they want to add to the data they entered or accidentally click in the text box.

  I thought to make the textbox to read after a user of other data and leaves the text box BUT if they want to change what they got they can't because it is read-only.

  Any thoughts on a solution that would meet my needs?  I prefer not to have a button on the form that a user clicks to erase the contect of a specific text box, but it's the only other thing I can think of that would work.

  Question 2

  For label objects as Article 1, I need to add a large amount of data (more than 1 page of text in the paragraph format) in a label/text box.  I suppose that the best object to copy and paste this data into is a label and not a text box (which I could remove the formatting and reading only).  My one major requirement for this is that I develop text fields before this Article 1, which should push (wrap) Article 1 contained on a second or third page.  I can set the property object to break up, but I don't know if that will lead the content of Article 1 partly wrap to a second page.  It will be (is that the right solution)?  I prefer not to enter this long content of many objects of label for each paragraph, but I did it in the past and it works.

  If it's important, my design of the shape has a subform (with the property set to cast) and each object embedded in this subform in the hierarchy list (additional subforms, text boxes, labels).  I implement it effectively and function I wanted me?  I know it's hard to image.

  Thank you all for reading my post and I expect all your comments and suggestions.

  Jeff

  Hi Jeff,

  Here is an example, where the textfield object has a null type. This allows to have the legend inside the textfield object. As soon as the user clicks inside the textfield object, the 'legend' disappears and the textfield object is available for the user to type in.

  https://Acrobat.com/#d=uqcNdyoPayTa2MbPb8F88A

  The form has two options. The second replicates the 'legend' at the end in parentheses if the field is NOT null.

  I will come back to q2 after a bite... Army market on her belly

  Niall

• The drafting of emails is small (like this) how do I expand while it remains high (the default value)?

  How to enlarge type size ansd save as default (e-mail)

  The drafting of emails is small (like this) how do I expand while it remains high (the default value)?

  I use gmail.  Browser is Firefox.

  Is not a Microsoft program, I did some work for you leg.
  http://lmgtfy.com/?q=http%3A%2f%2Femail.about.com%2Fod%2Fgmailtips%2Fqt%2Fet_font_size.htm&l=1

• Want to change the WordPad default values for font size and line spacing

  I use WordPad quite heavily because it is simple and fast.  But the new version of W - 7 seems to not allow you to change the default values for the font, size and line spacing.  The default values are not suitable for a large part of what I do and I'd like to find a way of quickly and easily, either make the changes permanent or change this to open with a single click of mouse or at most two.  Any suggestions?

  It is the "best" solution to workaround.  After you change your Default.rtf custom, simply move it to your system32 directory and add the "Default.rtf" at the end of the location of your target on the property sheet for your file WordPad.exe.

  Every time that you open its default location in the directory c:\program files\windows NT\Accessoires WordPad.exe, it defaults to now your Default.rtf custom.

• Default values for the service Windows 7

  I found many services, including the OEM and Microsoft have used the resources of memory (> 1.5 G) during my new machine (HP dv6) started upward.

  What are the initial start of the consumption of RAM for various editions of Windows 7? No point of comparison? I heard around 300 k was of dimensioning pro-fiere lite Microsoft.

  Whitepapers descripting the default values for Microsoft services? I found some old windows, but not on Windows 7. Major differences for these default values in editions of Windows 7?

  Best practices or procedures of building available to improve performance and safety for Windows7?

  A lot...

  Read here what services are started by default:

  http://www.blackviper.com/Windows_7/servicecfg.htm

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Specify a default value for a column in a Script

  Greetings fellow Forum inhabitants,

  Thank you in advance for taking the time to read and answer my post! (thumbs up)

  I'll jump in full.

  I've already created table:

  CREATE TABLE Bill

  (

  OrdID number 4 NOT NULL,

  Description VARCHAR2 (30) NOT NULL,

  ProdID NUMBER (6)

  actualprice NUMBER (8.2)

  NUMBER Qty. (8).

  itemtot NUMBER (8.2)

  );.

  I have to create a script to load the rows in the table of the invoice by the intervention of the user. However, I specify a default value for quantity

  That's what I have so far:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& & ordid, & & description, & & prodid, & & actualprice, by DEFAULT, & & itemtot)

  WHERE qty = DEFAULT;.

  or

  WHERE DEFAULT = 1;

  or

  ??

  I don't know where I am going wrong. I apologize if I'm unable to communicate what she I'm actually doing.

  Any advice would be appreciated.

  Thanks again for your time.

  Hello

  e752a7a0-bab5-4ee4-9ea4-bf7c4a2cadab wrote:

  Greetings fellow Forum inhabitants,

  Thank you in advance for taking the time to read and answer my post! (thumbs up)

  I'll jump in full.

  I've already created table:

  CREATE TABLE Bill

  (

  OrdID number 4 NOT NULL,

  Description VARCHAR2 (30) NOT NULL,

  ProdID NUMBER (6)

  actualprice NUMBER (8.2)

  NUMBER Qty. (8).

  itemtot NUMBER (8.2)

  );.

  I have to create a script to load the rows in the table of the invoice by the intervention of the user. However, I specify a default value for quantity

  That's what I have so far:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, & description, & prodid, & actualprice, by DEFAULT, & itemtot)

  WHERE qty = DEFAULT;.

  or

  WHERE DEFAULT = 1;

  or

  ??

  I don't know where I am going wrong. I apologize if I'm unable to communicate what she I'm actually doing.

  Any advice would be appreciated.

  Thanks again for your time.

  Sorry, I can't understand what you want.

  If you want the production order 1, then put a literal 1 for the value of this column:

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, ' & description', & prodid, & actualprice, 1, & itemtot)

  ;

  or, if that value is used elsewhere in your script, set a variable substitution:

  DEFINE Qty = 1

  INSERT INTO Bill (ordid, description, prodid, actualprice, qty, itemtot)

  VALUES (& ordid, ' & description', & prodid, & actualprice, & qty, & itemtot)

  ;

  I hope that answers your question.

  If this isn't the case, post an example, such as:

  "If the user types... then the created line must contain... but if the user types... then the new line should be... »

  Simplify the question.  Do you really need 6 columns to show what you don't understand?  Why not just 2 or 3 columns?

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Custom calculation script - default value

  Hi, I would like that the field 'A' a calculation whenever the field "B" changes its value after this 'A' becomes editable for the user. If "B" changes its value at any time, then 'A' clears any value, calculated and becomes editable for the user. As a default value.

  You must use the custom b validation script to do the math. That change in a way a field will update when the value of B, but you will still be able to manually change A. To access the value of B, in this case use event.value, for example:

  this.getField("A").value = event.value * 2;

• Set a default value for an attribute in modules - OPM

  Hello
  
  I'm trying to set a default value for a numeric attribute 0. I tried a few things but did not work.
  I was trying to default custom function that defines the default value of "0".
  I'm new to OPA, and I know not java.
  This is the java program that I intend to deploy as jar.but unfortunately it does not work.
  
  import com.oracle.determinations.engine.CustomFunction;
  import com.oracle.determinations.engine.EntityInstance;
  import java.util.Random;
  
  SerializableAttribute public class DefaultFunction extends CustomFunction
  {
  public Object evaluate (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  return 0;
  }
  }
  public Object requireKnownParameters (EntityInstance entityInstance, Object [] objects)
  {
  If (items [0] is nothing)
  {
  Returns false;
  }
  }
  
  }
  Is there any reference material where it has all the functions or the sample programs.

  Have you seen the article using developer?
  http://docs.Oracle.com/HTML/E29403_01/content/tutorials%20and%20Samples/Eg_Create_CF_to_Default_a_Value.htm
  This shows you how to use a custom default attribute (number) function. Maybe it's not 100% what you're after, but it might help.
  See you soon
  Ben

• Setting the default value for a dynamic selection menu

  Hi I have a php with 2 forms to this topic page, you feed on the other to achieve a lock down (manufacturer > model). The menu then select I have a static default value 'Select a model aircraft', I want to set a value for the first menu select dynamic to read "select the manufacturer. When I add a static value to my list, it tells me I alreay have a dynamic behavior on this menu and choose another. I've included the code for two menus. Thank you in advance, I know it must be a stupid question, but it has left me speechless.

  Tom

  This is the menu that I want to add static value defaults to.

  < td width = "667" > < select name = "airMake" style = "" width: 200px; "" OnChange = "This.Form.Submit (); "id ="airMake">

  <? PHP

  {}

  ? >

  < option value = "<?" PHP echo $row_rsAirManufacturer ['aircraft_manufacturer']? > "<?" PHP if (!) strcmp () ($row_rsAirManufacturer ['aircraft_manufacturer'], ((isset($_POST["airMake"]))? $_POST ['airMake'] :""))) {echo "selected =-'selected\'" ;}?})) > > <? PHP echo $row_rsAirManufacturer ['aircraft_manufacturer']? > < / option >

  <? PHP

  } While ($row_rsAirManufacturer = mysql_fetch_assoc ($rsAirManufacturer));

  $rows = mysql_num_rows ($rsAirManufacturer);

  If ($rows > 0) {}

  mysql_data_seek ($rsAirManufacturer, 0);

  $row_rsAirManufacturer = mysql_fetch_assoc ($rsAirManufacturer);

  }

  ? >

  < / select >

  < table >

  < /tr >

  < / table > < / make >

  < do action = "quoteResult.php" method = "post" name = "quoteForm" > "

  < table width = "100%" border = "0" cellpadding = "5px" >

  < b >

  < td width = "260" style = "color: #000;" text-align: right; "> aircraft model: < table >

  < td colspan = "2" > < span id = "spryselect2" >

  This is the menu that works properly.

  < select name = "airModel" style = "" width: 200px; "id ="airModel">"

  < option value = "" <? " PHP if (!) () strcmp ("", ((isset($_POST["airMakeField"]))? ") $_POST ['airMakeField'] :""))) {echo "selected =-'selected\'" ;}?} > > < / option >

  <? PHP

  {}

  ? >

  < option value = "<?" PHP echo $row_rsAirModel ['aircraft_model']? > "<?" PHP if (!) strcmp () ($row_rsAirModel ['aircraft_model'], ((isset($_POST["airMakeField"]))? $_POST ['airMakeField'] :""))) {echo "selected =-'selected\'" ;}?})) > > <? PHP echo $row_rsAirModel ['aircraft_model']? > select a model airplane < / option >

  <? PHP

  } While ($row_rsAirModel = mysql_fetch_assoc ($rsAirModel));

  $rows = mysql_num_rows ($rsAirModel);

  If ($rows > 0) {}

  mysql_data_seek ($rsAirModel, 0);

  $row_rsAirModel = mysql_fetch_assoc ($rsAirModel);

  }

  ? >

  < / select >

  -Change

  on this subject.

  Select the aircraft manufacturer

  So if the value of "airMake" is - 1, you know that no choice has been made.