No device driver Bluetooth not found

Similar Questions

• device driver Bluetooth not found in windows 7hb update?

  I have not found a bluetooth device driver so please help...

  /

  Hello

  1. What is the number of brand and model of the computer?

  2. What is the message code error that you experience when you try to use the Bluetooth software?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Please follow the steps mentioned below to help solve the problem.

  Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

  Method 1

  Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

  http://support.Microsoft.com/kb/2654568

  Method 2

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Refer,

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps.

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Could not open device driver Bluetooth ACPI (tosrfec.sys)

  Hello

  I installed battery Bluetooth Toshiba under Windows 98 SE (Version 2.03 of BT Stack..).
  If I wan't to run the Bluetooth Manager, I always get the message "Cannot open device driver Bluetooth ACPI (tosrfec.sys).".

  What can I do?

  Post edited by: jollydwarf

  Hello

  Click for the list of BT and there you will find the link to the centre of Information of Toshiba Bluetooth. Check please the FAQ section and you will find lots of useful information on BT and BT troubleshooting.

• my computer says that my primary drive 1 not found, secondary drive 0 is not found. also allicating I/O bar for PCI device error.

  We had a power outage about 2 weeks ago, it burned my hard drive. My neighbor put a new disc in for me, now my computor is said primary drive 1 not found, O secondary drive not found, and 1 secondary drive not found. I do not know how to solve this problem, can you help me?

  Hi camicannon,

  Check out the wire link such question and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/XP-primary-hard-drive-disk-not-found/c98f8205-78d8-4e6a-A603-8c4fae852690

• device driver Bluetooth for windows 7 64-bit sony vaio

  Hello

  I need device driver bluetooth for windows 7 64 bit for sony vaio

  device driver Bluetooth for windows 7 64-bit sony vaio

  Please help me

  -Nicolas

  After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

  This is how to solve the "Bluetooth peripheral device is not a driver:
  I use the following materials in a dozen different tests:
  -Only for Broadcom based on USB from Belkin and Targus dongles
  -Windows 7 Professional 64-bit on four different computers
  -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
  -Bluetooth file transfer wasn't of interest, but I tested with two different phones
  This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
  -- -- --
  Step 1: Ignore 99% of you think that you have learned about this problem.
  It will be * probably * boil down to a missing COM port.
  Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
  (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
  Step 3: Stop looking for a driver for something called a "Bluetooth device device.
  There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
  -- -- --
  Unfortunately, most of the people reading this will have tried one or more of the following:
  1.) install this stupid Windows Mobile Device Center
  2.) install any number of drivers Bluetooth who-knows-what from who knows where
  (3.) running all kinds of utilities third driver
  4.), forcing several facilities from pilot to operate in Win98, XP or Vista
  5.) sacrificing countless animals
  The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
  -- -- --
  Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
  With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
  So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
  appeared during installation.
  1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
  2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
  .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
  (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
  (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
  4.) now attempt to pair the device of your choice
  .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
  5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
  6.) do not despair
  ! This happens the first time connect you a new Bluetooth device.
  7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
  8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
  9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
  Click on:
  a.) browse my computer for driver software
  (b) let me pick from a list of device on my computer drivers
  (c.) in the common hardware types list, select:
  --->>> Ports (COM & LPT)<>
  d.) d.) under manufacturer, select Microsoft
  e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
  f.) when you are prompted with the update driver warning, click 'yes '.
  g.) with joy to read the message that "Windows has updated the driver software.
  (h.) read for pleasure, and then click "close".
  (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
  10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
  -- -- --
  I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
  Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
  -- -- --
  Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
  I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
  I hope this saves people a lot of frustration.

• COM3 is not installed. Driver is not found online.

  The Device Manager shows as COM3 is not installed. A driver is not found. It seems that prevent me from upgrading to Windows 10 of 8.1Pro. Please provide a solution.

  http://support.Lenovo.com/us/en/products/desktops-and-all-in-ones/ThinkCentre-m-Series-desktops/thin...

  the drivers are here

• Primary hard drive 0 not found Dell Latitude

  Hello

  I just bought 2 notebooks of Dell Latitude D800 with no operating system. The first laptop is fine, but the second, when I turn it on it shows the Dell screen with the loading bar. The loading bar is to halfway to the end when it freezes. The system freezes on this screen for about a minute, then it beeps twice and a black screen that says:

  "First hard drive 0 not found '.

  No bootable devices - don't strike F1 to retry boot, F2 for Setup utility.

  So I go into the BIOS and see under "internal hard drive" and he says: 'no '. I checked and make sure the hard disk has been activated, and it is.

  I took the hard drive and reinstalled it. Nothing. The drive is a Toshiba 40 GB. In addition, mention, the reader makes a weird noise (not the click of death) and the hard drive on the laptop stays on all the time.

  Other D800 I mentioned boots very quickly and displays a no. OS screen, which is very good.

  So is my dead HDD?

  Thank you

  It is quite clear that the BIOS does not recognize the hard drive.  I suspect that the IDE controller on the motherboard has failed.

  Given that you have two cell phones similar to fool around with, probably the fastest way to isolate the problem is to swap hard drives.  Call the laptop that does not have one and one that works B

  If the laptop has now boots and cell B now is not, you know that the player who has been to A is bad.

  If A laptop computer still does not start and portable B boots again, then you know that the two disks are OK and the problem is the motherboard or the connector of the drive in the laptop.

• base system device driver is not not in Device Manager

  original title: my laptop is dell vostro 1015 and windows 7 ultimate, but there is no .based peripheral system for this problem .please help a driver in Device Manager

  my laptop is dell vostro 1015 and windows 7 ultimate, but a driver in Device Manager is not found .based system device .please hel [p for this problem

  It took me a while, but eventually it worked... it's the card reader!  See here for the driver:http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=VOS_N_1015&os=WLH&osl=en&catid=&impid=

  You'd be surprised how many messages there are on the internet for the same problem, and 99% of them are Dells!

• (brand new) hard drive 0 not found (Latitude D600)

  ======================================================

  I know this has been discussed a lot, but I have not found a solution.

  My laptop is a Dell Latitude D600, BIOS Version: A16

  My HARD drive died last week, he was making noises that I made backups.

  Of course, one morning I turned it on and it says '... ". hard drive 0 not found... »

  So I thought right we'll buy a new one, no big deal. In this case.

  But to my horror, the brand-spanking-new HARD drive made me exactly the same thing!

  Costs of the antistatic packaging, directly in the cradle, with tenderness.

  "First hard drive 0 not found '.

  No bootable devices - strike F1 to retry boot, F2 for Setup utility.

  Also, the BIOS reads my "main hard drive: ' as 'None '.

  I tried: -.

  -Replace (re-attachment for cradle clamp, tighten, etc..)

  -reset of the BIOS (pressing ALT - F)

  -internal 'HDD' isolation in the "boot order" (BIOS)

  -startup WinXP CD to format (says also that it cannot detect a HARD drive)

  -stroked and tweaked every possible BIOS setting

  -a ran the diagnostics (well Yes, tells me that it cannot find a HARD disk)

  -check the temperature (not a problem at all)

  I bought my D600 to opportunity without boot floppies or manuals, and private security has passed.

  I'll try to take out the battery for a day to see if that will be "flash BIOS" but I can't help you as (to my knowledge) the motherboard settings remain stored with the help of a small battery attached to the actual motherboard that would be inside the envelope, so I think it's a misunderstanding in another post on the forum , but I'll try it in desperation anyway. Next step would be to open the envelope and checking the IDE and remove the battery from the motherboard for 5-10 minutes.

  After that, my only option is to send to some local business PC repair. Ick.

  Any help will be VERY appreciated! Thank you.

  
  

• drive 0 not found: serial ata, sata-0

  About 3 seconds to turn on my pc, I get the message:
  Drive 0 not found: Serial ATA, SATA-0
  Strike F1 key to continue, F2 to run the Setup utility.
  If I type F1, I get the message:
  No available boot device-
  Strike F1 to retry boot, F2 for Setup utility

  Please notify.
  Thank you.

  
  

• my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  Reset the SMC.

  Barry

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• W520 - Base system device driver does not

  Greetings.

  This morning at the start of my ThinkPad W520, the player no longer works. A glance in the (Windows 7, 64-bit) Device Manager shows the 'Base system device' and points out that "the drivers for this device are not installed." Trying to get Windows Installer natively drivers does not work. Some googling shows others with similar problems in the past; recommendations include installing a card reader driver Ricoh for Windows XP or Vista; It did not work. Other drivers available include 8ass82ww.exe and 8axv51ww.exe - these don't work. Installation of the own Support Center Lenovo software shows that the Base system device driver is not installed. I can't find a way to install it. I tried installing driver exe files and searching the same files using the browse-for-the window Windows files during the installation of the drivers for the Base system device.

  Seriously, * beep *? I lost more than two hours on Sunday morning trying to solve this problem. It worked yesterday. I did install new software crazy, or any software besides. Why this happens and more importantly, how can I FIX it?

  This morning, ran Windows automatic update; I don't know if the updates were designed to the card reader, but the driver is now installed and the operation of the device. Too many updates to list them all, but thank you all for your help. Between the time I opened this thread and now probably I rebooted my machine 30 times and tried all combinations of drivers + restart. Then, poof, this morning, it is fixed.

• T420 W7 Base system device driver does not

  Hello

  After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

  I saw that the SD card reader was not working and so I covered the missing pilot was that one.

  The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

  However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

  I have install again and the same happened. He worked and after restarting two has stopped working.

  If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

  I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

  1 install the drivers from the Lenovo site.

  2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

  3 reboot and it will be fixed.