no error message no disc in the disc drive

Similar Questions

• Error message when you install the printer driver

  First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

  My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

  Windows found driver software for your device but encountered an error trying to install it.

  In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

  If you know the manufacturer of your device, you can visit their website and check the support.
  My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

  Please sent me useful information.

  Thank you so much.you sent slove my problem how.

  It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
  step 1:
  Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
  step 2:
  Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
  step 3:
  I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
  step 4:
  I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
  I hope this answer helps anyone with a similar problem.

• error message - failed to install the new driver for deskjet f4280

  Now impossible to print what

  OK, at this point, it seems that you need to "scrub" all current your system HP software and "start." To do this, follow the instructions below:

  If you are using the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-59236-4&cc=us&DLC=en&LC=en&OS=228&product=3390949&sw_lang=

  10. run the download to reinstall the printer

  If you use software that has been downloaded and extracted to your system:

  1. click the Start button and type %temp% enforcement

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-59236-4&cc=us&DLC=en&LC=en&OS=228&product=3390949&sw_lang=

  10. run the download to reinstall the printer

• Access denied error message trying to update the wireless driver.

  Hello

  I recently bought and installed the software for my wireless USB and when I try to update my device with this software Realtek RTL8188CUS LAN wireless 802.11n USB slim solo he SAIS access denied

  I am using the administrator account on my computer and looking for any kind of help that would be useful.

  Hi Hare Gates,.

  This issue may have caused corruption of driver's record. I suggest you try to uninstall the drivers Wireless LAN then try to download the latest Realtek website drivers and try to install it and check if it works for you.

  Step 1: Uninstall the drivers of network adapter in Device Manager.

  Follow the steps to uninstall the network card drivers:

  a. press Windows + R keys and type devmgmt.msc and press enter.

  b. search for network card.

  c. right-click on the Realtek Wireless LAN and click Uninstall.

  d. restart the computer.

  Step 2: Download the latest drivers for solo slim Realtek RTL8188CUS Wireless LAN 802.11n USB of the site Web of Realtek.

  http://www.Realtek.com/downloads/

  Step 3: Install the latest LAN drivers wireless on your computer.

  Please reply with the status of the issue so that we can better help you.

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Satellite Pro U200 - error messages from storage during the shut down

  I use Office XP, Office 2003, Adobe Acrobat 7.0, internet explore, copernic search machine and some other programs. The Task Manager said after a complete reinstall (recovery CD Toshiba) with about 60 process.

  Now, I got to 71. I've updated the LAN driver, use a norton security system, all inclusive Windows XP update
  and however - only 2 days after complete reinstallation I am facing once again error messages, which indicates that a process could not put storage.

  Hotline or an engineer on the Toshiba site could help me on the issues. Hardware (RAM, hard disk) will have been controlled and that okay.. In addition to the error messages when stop I also got the phenomeonon this laptop is not stopped completely and was for hours (blue screen indicating that the computer stops) until I turned off with the key for 5 seconds.

  What could be? I had a few other laptops before and I ran identical programming on them - and I have never had these error messages.
  I checked the task Mgr before stopping and no process was running - however this error messages that a program cannot be put in storage rises.

  Hello

  For me it of clear. You have installed so many applications, and some of the background process may be completed when the laptop stops.

  For me its amazing how many applications are running in the background.
  You write something about 71! I also installed many applications, but on my background portable 40 processes are currently running and for me it a very high value.

  I think that you should check you msconfig (type msconfig in the run window) option and check the background processes that are not important. Turn off also automatically load it at initialization of the laptop.

  Unfortunately, but there is no other solution.

• Error message when I open the Bluetooth Manager

  I get the following error message when I open the Bluetooth Manager: "cannot open the device Bluetooth ACPI (tosfrec.sys) driver. What I am doing wrong? How can I get past this point?

  Your machine has Bluetooth card installed? Is it installed correctly?

• Qosmio G30-220: HD-DVD via HDMI - error message Impossible to export the signal

  Hello

  When I play a HD-DVD on my G30-220 LCD_panel, it works like a charm (with the Toshiba HD - DVD player software).

  When I switch to dualview to export the signal through HDMI to my LCD TV (HDCP), I get an error message:

  ' Cannot implement the signal. Please switch to the internal display "(this is not the exact English message. I get the error message in Dutch and I've translated).

  Hello

  As much as I know the dual display is not possible. Either watch you on LCD display or on the TV. The two of them at the same time will not work. Reason because it's the protection against copying, and also because of very high data transfer.

  I tested it with Qosmio friends on my LCD HD-ready TV.

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft