No file, but the device is full?

Similar Questions

• Recovery disk - I restored my files, but the drive keeps telling me that it is almost full

  Recently, I backed up my files on the recovery drive. I have restored my files, but the drive keeps telling me that it is almost full. I don't know how to fix this.

  Restoring a backup does not remove the backup files.  You must remove them manually, unless you want to save in case another restore of that backup is necessary.

  And if you did it on your manufacturer's recovery disk, it wasn't a good idea.  This disc is for recovery only and should be used for anything else.  Find another drive to use for backups.  If this is the case, it may be best to contact the manufacturer and tell them that you were doing so they can help you to correctly resolve the situation without causing problems for disk recovery and your ability to use it as it should be used the need ever.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Media Player recognize my mp3 player but said there is no files on the device, even after the sync successfully

  I have not hooked to my mp3 player up to my netbook in age, but today I wanted to manage my songs I did. Media Player recognized my camera (Sansa c240), but it that there are no files on my device. It scared me because I had listened to just the day before and there was a lot of files on it! I checked the drive itself and the files were all still there. Media Player told to sync files on the device, so I did and it successfully on the device. However, even though the songs were synchronized with the device, Media Player still insists that there is no top file! I checked the player and 3 files synchronize had were there. Help!

  I use Windows 7 Starter on a netbook Samsung. Thanks for all the tips ():

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Method 1:

  Updating the Sansa firmware update and check if that helps.

  Sansa Firmware Updater and defined Firmware : http://kb.sandisk.com/app/answers/detail/a_id/156/~/sansa-firmware-updater-and-firmware-defined

  Note : using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Method 2:

  Sansa player NOT recognized by the computer : http://kb.sandisk.com/app/answers/detail/a_id/42/kw/e100/r_id/101834

  If the problem persists, then it would be best to contact Sansa for additional help.

  Sansa support: http://kb.sandisk.com/

• can not sync music to any memory card in Windows Media Player due to the error Windows encountered a problem when synchronizing the file to the device.

  Original title: can not sync music to any Windows Media Player memory card

  This has not happened before, but now, whenever I want to sync music to any memory card, it does not work. It makes the whole process, and it did as it syncs, but at the end of that music just does not appear in the memory card. If I go to the status of the synchronization, all songs appear with a RED x next and it says that Windows has encountered a problem during the synchronization of the file to the device. How can I fix it? as I said before, this has not happened before.

  Hi UlloaC,

  See the steps mentioned in the link below that relates to a similar question

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

  See also the link below

  How can I fix sync errors?

• create the file on the device

  HII, I use this code to create the file on the device, but I have an exception:

  try {}
  FileConnection fconn = (FileConnection)Connector.open("file:///SDCard/calvcard.ics",Connector.READ_WRITE);
  FileConnection fconn = (FileConnection)Connector.open("file:///store/home/user/vvvv.bmp",Connector.READ_WRITE);
  if(!fconn.) Exists())
  fconn. Create();
  OutputStream out = fconn.openOutputStream ();

  int a = 0

  } catch (EXception pp) {}

  any help please

  I solved the problem that I use
  FileConnection fconn = (FileConnection)Connector.open("file:///store/home/user/",Connector.READ_WRITE);
  Thanks for your response

• Data sheet says Camileo P10 save as .mov but the device saves as AVI.

  I just rec'd a P10 as a gift for Christmas.

  Looking at the specifications on the data sheet in line and also that the sources say that the P10 records video in .mov files but the unit I can only save as in the form of .avi files. However the box itself says that it records jpg images and video as avi (H.264)

  And I had to search the Internet for a long time to find a safe codec file CoreAAC Audio (FF) to allow Windows Media Player read the AVI with sound.

  That's happened? Why this change?

  NB I found a plug technique in line which says that the camera had the .mov and .avi formats. If this is true how access us a menu that can allow us to switch between file formats?

  Hello

  The .mov is an abbreviation of Quicktime. QuickTime is a multimedia technology from Apple.
  The .avi format is defined by Microsoft. AVI is the format most common for audio/video data on the PC it is Microsoft's answer to Apple's QuickTime technology.

  AVI is a very powerful architecture and newer codecs like DivX or XviD can have a quality similar or even better than DVD, AVI files.

  The said user manual supported file formats are Jpg for pics and MOV videos.
  It is strange why the P10 recorded in .avi...
  However, it is avi and mov supports the same properties.

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't sync Windows Media Player with my MP3 player, it says "Player Windows Media has encountered a problem during the synchronization of the file to the device".

  Original title: windows media player

  Whenever I try to download songs on my mps I do not sync my songs. Whenever I click on the button of synk sart on Windows Media Player little pop box saying "Windows Media Player has encountered a problem during the synchronization of the file to the device. For additional assistance, click Web Help. "and when I click web help it does not at all help me please someone help me!

  Hello
   
  1. with the device that you are trying to synchronize?
  2 - is the first time you try to sync Windows media player?
   
  Windows Media Player has encountered a problem during the synchronization of the file to the portable device. Because this error can occur for various reasons, there is no single solution.
  To resolve the problem, try to disconnect and reset. See your device manual for specific instructions on performing this procedure.
   
  In some cases, this error may occur if you try to synchronize a file hidden on a device. To resolve this problem, delete the file in the sync list or change the properties of the file so that the file is not hidden.
   
  For more information, see the article below,
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

• Windows media player plays most audio file but the 0r 5 last 10 seconds are crackling

  Windows media player plays most audio file but the 0r 5 last 10 seconds are crunchy, why?

  The following article might be worth a visit:

  Windows Vista - How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• iPhone user needs to know if this app will allow to consider when opening the files fill in pdf.  At this point, the iphone opens the pdf file, but the information that the sender had typed in are not visible.  If we opt for a pc, the info typed in is e

  opps, I put everything in the title line... no match came...

  This app allows to be consulted at the opening of the filled pdf files?

  At this point, the iphone opens the pdf file, but the information that the sender had typed in are not visible.  If we opt for a pc, the info typed in is here.  We believe that we need a viewer that will recognize the data inserted / under the direction of the sender. Made for mobile DC cela?

  Hello

  Yes, the Adobe Acrobat Reader for iOS on iPad/iPhone to view PDF Forms.

  The problem is that the preview PDF Apple does not make data from completed forms and annotations (Sticky Notes, point climax, drawing freehand, etc.).

  When you open a PDF document in an application (Mail, Safari, iBooks) Apple iOS, please make sure you use the feature of "open in" iOS to open it in Acrobat Reader for iOS.

  Please take a look at the following documents of the FAQ.

  • For iPad, see How to open PDF documents in Adobe Acrobat DC for iOS (iPad version)
  • For iPhone, see How to open PDF documents in Adobe Acrobat DC for iOS (iPhone version)

  Please let us know if you have any additional questions.

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.