HP office pro 8600 - mailing printed envelope is biased.

Similar Questions

• HP officejet pro 8600 more printing envelopes chemistry

  The normal printing process seems to work perfectly, only when printing envelopes #10 they live I have the problem with the crooked not printing any way how the envelope is inserted according to the Setup (Microsoft Word).

  To date, the following steps were taken:

  1. the version of the firmware is up to date: CLP1CN1322CR

  2. all the rollers are clean and act freely, no paper jams/particles anywhere - front or rear.

  3. the envelope seems to come out all right (looking directly at the front that it falls on the paper tray.

  4. different types of envelopes #10 were tried.

  The twisted print template is not consistent, sometimes it low angles differently and sometimes the implementation of the address of the sender and the recipient are different.

  Any suggestion would be appreciated.

  PROBLEM SOLVED

  The result is: READ THE MANUAL

  I had been assuming (incorrectly) OfficeJet Pro 8600 Plus would print the same as my previous HP OfficeJet Pro L7680 envelopes.  This model allowed me to print envelopes by putting on paper envelopes, I already had in the tray, put the envelopes on the side right side down.  He had always worked before with no problem and the envelopes printed correctly, even if you could use the status bar and adjusted the sides to accept the correct envelope size (never tried).

  On the 8600 model, you MUST remove any paper in the tray and load the envelopes in the Center, adjusting the sides to the size of the envelope.  In ADDITION, you must insert the face or envelopes down with the edge of the flap that is pointing to the right, a bit like the graphics on the bottom of the stage show.

  IF YOU USE MS WORD TO PRINT ENVELOPES AND LABELS, IT MAY BE CONFUSING BECAUSE IT SHOWS 6 POWER AVAILABLE, IF YOU CHOOSE THE ((QUATRIÈME DE LA DROITE) METHODS, IT SHOWS THE ENVELOPE IN THE MIDDLE AND THE EDGE OF THE FLAP FACING RIGHT, THIS CAUSES THE IMPRESSION OF BEING UPSIDE DOWN ON THE ENVELOPE.)

  That's what you should first read the User Guide (manual) for for the 8600 printer printing envelopes:

  Print on envelopes (for Windows, p. 39)

  Load Media (p. 24)

  Load the envelopes (p. 25)

  My frustrations have completed cockpit error.

• HP officejet pro 8600 - cannot print envelopes monarch

  I can't print envelopes Monarch size.  I tried MS Word and Pages (and Contacts).  The error message suggests that I have the wrong size paper in the paper tray.

  PS. I'm working on a Mac

  Hi AnnMckeown,

  Thanks for the information.  I would like you to try a generic driver to see if we get a different result.  Please see the procedure to do this below.  Make sure you use the driver printer deskjet 9800, because it supports the Monarch envelopes and can solve the problem.

  To assign other printer drivers in OS X 10.8:

  1. Open system preferences.
  2. Click Print and Scan.
  3. Click on the + sign below the list of printers.
  4. Select the printer in the list.
  5. Click on the dropdown next to the use.
  6. Choose Select printer software... from the list.
  7. A window titled printer software.  It is the window where you select the other pilot.
  8. Choose the replacement driver just for you-deskjet 9800
  9. Click Add
  10. Click ok

  Once you add the driver, try to print envelopes with her. Be sure to select the 9800 as the driver to use for printing.

  I hope this helps!

• HP Office Pro 8600 e all in one printer wizard disappeared

  I am running Windows 7, Office Pro 8600 e-all in one

  Out of the blue, two laptops in the House lost priner Assistant and all of its features (fax to the folder, etc.).

  Windows has had some updates for a few weeks so I can only assume it follows from there.

  For two laptops, I uninstalled and reinstalled the CD and the software of latest driver on the site of hp without success.

  I ran HP print and scan doctor without success.

  Any help would be greatly appreciated... I am at a loss.

  Hello

  On the start menu click programs and select HP, then select the HP Officejet Pro 8600 folder and proceed with the uninstall.

  Then download and install the following software, do not use older since the CD or software programs you can registered on the HP site in the past as the problem will remain while any previous software used:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4158&product=4323659&sw_lang=

  Once you have finished, restart your PC and click the HP Officejet Pro 8600, located on your desktop.

  Please let me know the results,

  Shlomi

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• HP OfficeJet Pro 8600, HP printer wizard installs not when the software is installed from the CD

  HP Officejet Pro 8600 e printer all in one

  Windows 7

  I had Assistant printer installed and working on my computer at least a year, then there was an update and it no longer works.

  I uninstalled the device and the software and reinstalled both on-site and directly from the CD without success.

  The only error I get is when I start everything first install it and there is a red "x" next to the update of windows.

  The installation process ends, the computer will recognize the printer and I am able to print but I have no control any function because none of these options in the wizard for the printer are turned on.  They are all grayed out.   The most important thing I need is the archiving of received faxes.

  Someone else in my family had the same problem, but was able to reinstall from the Web site and doesn't have any more problems.

  Thanks for any help.

  Hi liluno18,

  I want to help you with this question. I send you this link to the Microsoft forum on how to fix the red X on windows update. Follow the response from Joseph M.

  So I suggest you do a complete uninstall software of the JO 8600 and reinstalling the software once you have windows update works again.

  Let me know if you need help, I would be happy to help you.

• HP Officejet Pro 8600 Plus: HP Officejet Pro 8600 Plus printer-

  HP Officejet Pro 8600 Plus printer-

  Tried to copy both sides of a vehicle using ADF permit; paper too small (stupid user!); he copied the first side successfully. Now, I can't find the input document! How can I remove paper (which I can't find) which was too small for the auto feed?  It is not in the duplex unit, either.

  Hi @Dick_27,

  Welcome to the HP Forums!

  I appreciate that you try to remove the paper in your printer more HP Officejet 8600. I'm sorry to hear that, but happy to help!

  Please have a look through this guide, A display of the "Paper jam" error on the HP Officejet Pro 8600 e-all-in-one printer series.

  As well as this guide. The ADF (ADF) documents didn't pick up paper.

  I hope that these guides are useful and have a nice day!

• Office Jet Pro 8600 that printing of the iPad

  I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.

  Hello frashure11!

  About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.

  I hope this works!

• Office Jet Pro 8600: Partial printing

  When you print a photo about a third of the picture is printed paper is ejected and then the rest of the image is printed on the next piece of paper.

  I use advanced photo paper HP mode landscape with dpi maximum or output of high quality. Curiously, I don't seem to have the same problem with plain paper. Anyone got tips?

  Thank you. My suggestion is to make a copy of the photo using only the printer. You can place a photo on the scanner and press copy on the printer, but it's normal, I see the issue now. It seems that this may be a hardware problem and have nothing to do with software or print settings. Looks like the printer has difficulty feeding paper properly, or paper photo itself could be sticking causing 2 sheets to feed through both.

  You may be new photo paper you can try, paper fresh out of the package?

  Now that I understand the question, I suggest you use the following document to solve the problem: HP Officejet Pro 8600 e-all-in-one printers (N911) - more than one Page at a time feeds through the printer.

  Thank you for your patience and perseverance. Talk to you soon.

• Card printing on HP OfficeJet Pro 8600 mailing US

  How can I print a stack of postcards on a HP Officejet Pro 8600?  I see Japanese postcard in the printer driver, but not US.  It is printed once on a test sheet, but all subsequent attempts give a paper size mismatch.  The closest media listed in the pilot are 'L' who, after much chasing, seems to be 3.5 "by 5".  US postcards are 3.5x5.5.

  Advice would be greatly appreciated.

  Kind regards

  Seem to have an answer to my own question, or at least a workaround solution (and it only took a few hours of trial and error): chose to 'L' as the paper format (photo 3.5 "x5.0") in the device driver.  "Say the word processor you want a 3.5" x5.0 "page size.  Skew lines 0.25 "to the right.  "Put the 3.5" x5.5 "blank us map postal ferry #1 with the face down and 'stamp' to the left and the short side first of all in the printer (i.e. the left end of the postcard).  Print the address.  Return the postcard and repeat to print the message.  Noting that double back will not work with and huge.  Bottom line: the answer is to lie to the software twice.  So go ahead and print.  If you have the address and message in the same doc file, be sure to print only one page at a time and be sure to get the page 1 and page 2 in the correct order, or you will get the message on top of the "stamp".

  Shredded, ain't it?

• Office Jet Pro 8600: problem of authentication on a Android phone net Office Pro 8600

  Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store

  Hi Banhien

  After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.

  Jack1121

• HP Officejet Pro 8600 software / printer on Windows 8

  We just bought a new printer - HP Officejet Pro 8600.  We have 2 computers I want it to connect to eventually.  1 is a cable in the office (Asus) with Windows 8 & the 2nd. is a laptop (HP) with Windows 7 (two new computers within the past year).  I tried to boot with the Windows 8 a.  It seems I have to buy an 'ethernet' cable to start with - it says to plug into the wall - this does mean in our router?  The printer has all the details how to take the packing off the printer tape but the minimum for 2 types of cables.  2 problem is the software is not compatible with Windows 8.  I guess it's doable, but can someone tell me details on how to go about it.  I've seen some of this forum for Windows 8? RT the instructions would be the same?  On this computer, I'm stuck without 'ethernet' cable (comes with a USB cable - what is - this for?) & the fact that Windows 8 do not accept software.  It seems that if I go not for a good start but probably assume that everything is possible at some point?

  Our old printer is a cannon that has the "almost complete used ink absorber.  I plan on using that one with the laptop until it is completely 'dead' then would also like to work with our new 8600 printer.  I thought that it would probably be best not to hang it up until I have the old party?  What is the best idea or not?

  I'm not too computer 'savay' but my understanding is I would need to have a "cable in" via an ethernet cable and the other would be "wireless".  It gave me the idea that the printer can be anywhere in our House, but assumed it would be partly true since the ethernet cable should be near our router?  Is this a correct assumption?

  Any help appreciated.  Thank you.

  Hi SueSSue,

  If the printer is connected Ethernet you will not have to worry about getting a weak signal and possible connectivity issues, but with wireless, you are not bound to the office with the laptop. The option should be good in your case. If the printer is already at work, you can leave it connected to the way you have it. Let me know if you need help.

• HP officejet pro 8600 - cannot print from my macbook pro

  We just bought a new HP officejet pro 8600 but for some reason, we cannot get my macbook pro to print on it. My mac says it is connected to it. It is listed in the printer only and all the settings look fine, but when I send a document to the printer, it will not be printed. He did print the first day we had (a week ago) but it stopped and we cannot figure out what to do. My daughter's PC will be printed, as well as the pc of my husband. It is the first time that I had problems printing to a hp from my mac. Any thoughts?

  I had my Officejet Pro 8600 about six months.  Recently, I had the same problem.  It continues to print from my Windows computers but not the Mac.   Labour goes into the impression that it is place on a wedge.  I tried many fixes, including the removal of the printer and reinstall.  Usually removing and reinstalling it will fix for a while, but now, even that does not work.  In my view, that the permanent solution is to buy another printer.

• OfficeJet Pro 8600. Printing a list of todo in black and white

  I have the OfficeJet Pro 8600 more and I use an iMac, OS 10.92.

  I want to print a list of Todo comics in black and white rather than in color. (This is a todo list [i.e. Gaston ToDo] available in the applications in the HPePrintCenter).

  I don't see a setting that allows me to set a preference to black and white.

  Suggestions, please.

  Thank you.

  Lynn

  Hello lovemutts,

  Thank you for being a member of the HP support forums.  I see you want to learn more about the print settings with one of printing applications to which you are subscribed.

  I've included the document Getting Started with Print Apps and at the request of delivery print Apps .  In the section titled "Managed print Apps" is a sub-section titled 'print settings.  In there, it says "On some printers connected to the web, a settings option is available on the screen of the print Apps Print Preview mode that provides options to select the type of paper and print quality."  If the application you are using does not offer this option so that you will not be able to change all the predefined print settings.