no graphic device found

Similar Questions

• Critical error - no suitable graphics devices found

  Try to solve the problem of friends using TeamViewer, because they're 1000 miles :)

  He gets this message "Critical error - no suitable graphics devices found" on some of the games on Vista. I want to talk about Solitaire and Mahjong. InkBall works.

  Happened that recently so I suspected the Windows updates of the week passed and uninstalled them. No change.

  I uninstalled the graphics driver and had Windows download and reinstall. Same thing. I tried to download the latest drivers from Nvidia, but it fails on attempt (see http://img16.imageshack.us/img16/802...llerfailed.jpg).

  Because references to the problem of torque on the Interweb. Some have found using the system restore, but that came out under the name of each of them, I try I get a "system restore was not entirely successful," 'transient error', 0x800423f3.

  Someone suggested to remove and to reinstall .NET 1.1 which is a no go.

  Malwarebytes, Superantispyare and MSE are good.

  Thoughts?

  Hello

  This can help you to use the system restore to fix:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• FreeCell stopped loading: 'no graphics device adapted not found' and c:\windows\system32\aticfx64.dll is not designed to...

  I got my video card to RMA and then all of a sudden, after I installed the latest drivers (ASUS EAH5970) I ge the messages:

  1 c:\windows\system32\aticfx64.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider.

  2. no suitable graphics devices found

  3. "unable to detect a supported video card" ("Dragon Age: Origins" when starting)

  All these games have been working well in advance.

  Hello!

  You can uninstall then re - install video drivers, using Windows Control Panel and the option of 'Programs and features' to uninstall the ATI video drivers, reboot and then install the latest drivers from here: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Best Katy

• Graphics device not found

  I get a critical error message when I try to play games on my computer, it says Graphic Device not found. I have Windows Vista Hoe Edition 64 bit premium on my computer. How can I find the graphics card or driver to reinstall to make this work?

  Intel (R) 82868G GRAPHICS CONTROLLER (MICROSOFT CORPORATION-XDDM) that's all I can find on the graphics on my computer, if this is correct how to operate to play games?

  Hello

  • What games you try to play?
  • You see a yellow exclamation next to the graphics card in the Device Manager?
  • What were the changes made before the show?
  • How long have you been faced with this problem?

  How to open Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  You can try the following methods:

  Method 1:

  You can try to update the latest drivers

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• "No devices found, startup click on any key to restart Machine." & "audit of the media [impossible]. & ":( Your PC of Ran into a problem & needs to restart. "Error messages occur every hour.

  Hello

  I was browsing the web when suddenly an error message came up saying ": () your PC of Ran into a problem and must restart." We are only collecting the error information, and then we'll restart for you (0% complete). If you want to learn more, you can search online later to this error. KERNEL_DATA_INPAGE_ERROR"then he gave a black screen and says"Checking Media [Failed] ". Then he showed the logo Dell my computer, (the usual start screen), and then the screen disappeared. About 5 seconds later, another black screen (just like the "[Failed] Media Control" screen came saying "No Boot Device Found, Click Any Key To Reboot Machine".) I follow on the orientation of the screen for about 5 minutes and it kept giving me the same screens over and over again, no change there view. So I turned off my laptop, waited 30 seconds, back running the computer and he gave "[Failed] Media Control" Message twice, he disappeared and the Dell splash screen came again, he let me not log my computer as usual. This happened to me twice now, and it's extremely frustrating, because now I can't be on my computer for more than a half hour at a time without him doing this again. Also I can't scan the computer for viruses, it's 15 minutes to finish scanning and I get the message 'PC Ran into A Problem'. Can someone please help me understand why this is happening? Very much appreciated.

  -Austin screw

  Hello

  I apologize for the late response.

  What is the current status of the issue?

  Unplug all external devices connected to the computer except the mouse and keyboard and check for the issue.

  I also suggest you to start the computer in safe mode and check.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  KERNEL_DATA_INPAGE_ERROR error code indicates that the data page of the kernel of the required paging file cannot be read into memory. It could have happened due to graphics card drivers.

  Bug CRITICAL_PROCESS_DIED control has a value of 0x000000EF. This indicates that a critical system process died.

  See also:

  Bug Check 0x19: BAD_POOL_HEADER
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557389 (v = vs. 85) .aspx

  If you are able to start the computer in safe mode, we need to collect some newspapers of the dump files created to analyze.

  Hope this information helps. Response with status so that we can help you.

• HP pavlion 15: Please HELP NO BOOT DEVICE FOUND

  I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?

  If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:

  http://support.HP.com/us-en/document/c01443463

• BCA install Win 10 since El Capitan "no boot device found". »

  I ran a Boot Camp for Windows 10 installation process using this configuration:

  MacPro3, 1

  El Capitan 10.11.2.

  Win10_1511_English_x64.

  Boot Camp Assistant 6.0.0

  I used a flash drive USB 2 for the installation disc.

  I modified the plist BCA as shown here:

  http://Tsentas.NET/create-a-Windows-7-or-later-version-install-disk-missing-on-e l-capitan.

  BCA works well, downloads support, creates what looks like appropriate on the USB installation files, and then create a MS-DOS (FAT32) partition on a hard disk that is dedicated in an internal Bay. At this point, it seems to be trying to boot from a Windows installation process and rise black screen "no boot device found... etc."

  Any idea whats up?

  Thank you, Bruce T

  Create a USB key modifying the Info.plist file does not work? There is a reason that it's missing at first, meaning that your specific model, with an integrated optical drive, needs to use a physical DVD. You can burn a DVD from ISO?

  Be aware that a 2008 MP has no W10 driver supported by Apple. A list of Macs Apple officially support it to use 10 Windows on your Mac with Boot Camp - Apple Support .

• I have HP notebook: no boot device found after the death of the computer during the update

  During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• How to fix this error: "MPT Boot ROM - no device found!"

  Ideas: my IBM Intellistation Z Pro 6221 boot from IDE hard drive. Error message "MPT Boot ROM - no deices found!" error message is displayed. Machine will start from a USCSI drive when it is connected. IDE drive is then recognized as drive D: to hard drive which does not physically OK. Normal order of BIOS. While that started from the drive SCSI Windows detects the IDE drive and after a reboot, I get a message that says that the ROM of the MPT Boot has been installed successfully. But when I disconnect the SCSI disk and then try to boot from the IDE, I again get the error "MPT Boot ROM - no device found!"

  Does anyone have a solution that will solve this problem and get the IDE drive to boot normally again?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Macz51,
  Thanks for posting on the Microsoft answers Forum.  The ROM of the MPT Boot part of the SCSI controller.  So, when you disconnect the SCSI drive, you will get the error message.  If the SCSI controller is a card, you can remove it, and then check your BIOS settings to start the command and make sure that the BIOS sees your IDE drive.  If you have problems with the hardware being not recognized before it starts with Windows, then you will need to contact your OEM for support. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• no bootable devices found

  Hi guys, I have a laptop malfunction on the no bootable devices found. I use acer 3810 t sucks. It was working just fine last night, but it is a malfunction of this morning.

  Looks like you have verified that the hard drive is dead!

  You can buy a new hard drive in a local store, PC or even online, like Amazon, among others. Opt for a similar or greater size than i ' existing. The size is noted in the UK, for example, 250GB, 500GB etc.

  Hard drive bracket is very simple as you may have noticed. You need to remove the caddy with the screw on the side of the old hard drive. Take the old, enters the new then put back inside your laptop. Once mounted, you need to reinstall WIndows from your recovery disks. If you do neither, they may be available for purchase from the Acer support for your region.

  Once completed, you will need to install Windows, your Anti virus updates and other programs, then all the documents you have saved.

• No device found Boot

  Acer laptop: v3 - 551 G - X 419

  Hello

  Problems with the bios. Disabled the power button one night and now there are no bootable devices found. At the start of tours on the property, then a screen indicating there are no bootable devices found and invites me to press "ok". Which is followed by the screen boot manager with a boot option menu that I give no option to start. Now, I entered the bios and restored by default and messed around with the start controls. After playing with the battery in and out and pressing the power button to see if something could be reset. I thought that the motherboard did not read the hard disk, but on the homepage of the bios, I see the model number of the hard drive. Maybe a fluke I thought so I grabbed one of my hard disks and bios selected upward, but always was'nt able to boot into it. My next plan was to see if I could start a flash drive or external cd player, Showed up in the bios but not start and do not show up in the start menu. I decided to go and pulled the cmos battery in the system and reset the old way and still nothing. I can't get a boot cd and flash the bios or flash, I'm quite the situation here . It's not under warranty.

  http://imgur.com/MnWVY0p

  http://imgur.com/x0R53R6
  [edited to conform to the guidelines]

  Thank you for your time.

  New systems designed for Windows 8 use UEFI BIOS instead of the old BIOS Legacy. Your other HARD drive probably wasn't UEFI boot configuration no matter what version of Windows until Windows 8 does support UEFI. You must change your settings bios for Legacy BIOS to boot a usb or cd and based on the rest of what you said your HARD disk is probably damaged. So I suggest to test or with a surface HDD scan tool or if you know what type of HARD drive, this is the manufacturer test tool e.g. (Western Digital Safe Guard) or start a windows install disc and go to repair from the command prompt type chkdsk/r % DriveLetter %:.

  -Bennett

• built-in Bluetooth is always 'no devices found '.

  I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

  I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

  Install the appropriate drivers for your particular machine at your special machinery manufacturer (or the manufacturer of the bluetooth device) and make sure that there is no physical switch (or enter the BIOS) accidentally disabled for bluetooth.

• Printers with/without wire: "printer not found," "Can't find the printer," 'no devices found' (Windows 10)

  If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).

  • Printer not found
  • Cannot find the printer
  • No devices found
  • Your printer is not found on your wireless network

  The solutions include:

  Step 1: Restart the computer, printer and router

  Step 2: Check the status of network and printer connection

  Step 3: Manually connect the printer to your network (only for wireless connections)

  Step 4: Run the HP Print and Scan Doctor

  Step 5: Temporarily disable the firewall on the computer software

• Sony Vaio VPCSB1V9E Gobi OneClick - no device found

  Hello

  Try to get the WWAN OneClick internet running on my laptop. I have the SIM (network O2) inserted correctly. WAN wireless is lit in the center of the VAIO Smart but at the launch of Gobi OneClick Internet I get the message "no devices found".

  Did some research online - all I've really learned is that the laptop model I have include the Wan 3 G device - so I should be able to run it.

  Any ideas/help please.

  Thank you very much, Richard

  Greetings and thanks for your message. VPCSB1V9E seems to be a European model.  We recommend contacting Sony's Support Center in your area at http://www.sony-europe.com/pages/europe/sony_europe.html.

• No device found startup error

  My laptop is showing an error "Checking media fail media control.

  No device found start? Press any key to reboot the machine. »

  I was using AVG TuneUp Utilities before that happened and my computer has suggested that I reboot-since its been this list this error.

  I ran diagnostics on my computer and everything seems fine. He said: there is no error.

  Before this error, my computer was crashing with the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL smb_driver_intel.sys.

  My computer model is Windows 8 home Dell Inspiron R i15RM-3659SLV.

  I checked the hard drive and it is detected in the BIOS.

  I'd appreciate any help.

  Start Dell diagnostics - F12 to start execution.  Run the extended test - not only the quick 10 minute test.  If the player tests OK, chances are the AVG tune-up is at fault - I hope you did a set of recovery media when you received the system, because you will need it.  If you do not, you will need to call Dell for it (it's free if the system is under warranty - or you can buy it if the warranty has expired).