No HD detected during the installation of the OS

Similar Questions

• Tecra S3 - HDD was not detected during the intallation of win7

  Hello

  I have Tecra S3 PTS30E, serial No. is 17023153 H.

  Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.

  Why this problem?

  Please help me on this problem.

  Hello

  Tecra S3 supports RAID. Therefore, you need to install the RAID driver
  When installing XP, you will need to press F6 to add the RAID driver.

  Here the driver I found on the page of the European driver Toshiba

  [Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]

• Equium U400-145 - HARD drive not detected during XP installation

  I am trying to install XP on a new HDD on my Equim U400-145.

  However, during the installation of XP it says that the installation program "found no hard drives installed on your computer.

  The HARD drive is seen in BIOS and I checked in another system, and it works fine.

  Anyone can shed some light?

  Before installing Windows XP, you need the Intel Storage Manager. All other drivers and tools, you need only after installation.

  I think that you should only read hundreds of discussions here in the forum and check this Toshiba of the area of the FAQ document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good luck!

• No swap space detected during the WLS 12 c on AIX 7.1 installation (the Installation crashes)

  Hello

  I am trying to install oracle weblogic server 12 c on an AIX server. Setup detects that there is no space to Exchange on the system, but it's not true; the system has 16 GB memory swap. You can see on the screenshots.

  • Start the setup of Weblogic.

  

  • Control system swap space.

  

  • The system is not running out of ram also.

  

  • Even if I tell the installer to continue and ignore the swap space, it freezes and does not continue, and it is the last part of the log file of the installation program.

  

  Can any body explain or help me with this problem?

  I've tried silent installation and it worked, even though I told it to ignore requests from pre system.

  Thank you.

• Unknown device detected during the insertion of the SD card on a Dell computer.

  Original title: ACKNOWLEGMENT of CARD MEMORY

  IS THERE A FILE THAT SHOWS MEMORY CARDS. I HAVE BEEN USING 2 DIFFERENT MEMORY CARDS FROM SANDISK FOR A WORK OF PHOTO NIKON D 7000. RECENTLY, I RECEIVED A PROMPT THAT A STRANGER (MEMORY CARD) DEVICE HAD BEEN DETECTED AND NOW WINDOWS DOWNLOAD TO TAKE PICTURES WILL NOT ACKNOWLEDGE RECEIPT OF SANDISK CARDS. I CAN STILL DOWN LOAD DIRECTLY FROM THE CAMERA THROUGH A USB CABLE. WHEN I TRY TO INSERT A MEMORY CARD DIRECTLY INTO MY DELL DOES NOT EVEN APPEAR.

  O / S: VISTA VERSION 6.0 SERVICE PACK 2
  Br: VERSION 9.0.810.16421IC UPDATE VERSION 9.0.2 KB2559049

  Hi Willy,.

  You can try these steps and see if it helps.

  Step 1:

  You can try reinstalling the SD card and see if it helps.

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the device name in the list of Bus USB controllers.

  c. If you see the item on to the SD card, right-click on it and click on uninstall.

  d. restart the computer and check if that helps.

  Step 2:

  You can also format the SD card and see if it helps.

  You can make a backup of the data and format the SD card.

  For more information on the 'formatting of disks and readers' visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• !!!!!! Help! No network card detected during the instalation ESXI 5.5 in a laptop

  Hello

  I want to get a lab and install an ISO of ESXI 5.5 image from scratch in a laptop Lenovo T430 16 GB of RAM. Everything appears normally, BOOT from CD, copying files, early and late services, appears "not found network card remember that you at least have a network card to connect to the system", there is only the choice to have an ABORTION. Any help? The card is one Intel (R) 82579LM Gigabit Network Connection.

  What is strange to me if I installed a Windows 7 and after 10 VWworkstation, I can install a 5.5.without ESXI, even ISO problem

  ANYhelp is welcome!

  Jesus

  Welcome to the community,

  Please take a look at http://www.virten.net/2013/09/esxi-5-x-installation-on-intel-nuc-fails-with-no-network-adapters/ for more information on how to customize the installation image to recognize your network card. When you install ESXi as a virtual machine in VMware Workstation, it is not the physical NETWORK adapter which is presented to the virtual machine, but a virtual NETWORK adapter for which ESXi uses built-in drivers.

  André

• OS detection during OTA installation?

  I have setup an installation OTA of my application that must be installed only by devices with a certain level of the OS. Is there a way to enforce this (i.e .jad file property) or equivalent? Basically, I want to prevent users with incompatible devices to try to install the live application.

  I use eclipse with the BB plugin.

  Thank you for yor help.

  I don't know if this is possible, but maybe you can implement a script in your OTA site where it checks the user agent of the applicant unit. from there, you can have a logic on whether to download or not.

• During the 5.5 ESXi installation VMFS paratiton detects not for installtion raid controller

  Hello

  I try to install ESXi on Fujitsu RX200 Fijitsu equipped S8 Intel controller to scrub (new edition) installation that I try to install the VMFS disk raid 1 created of 500 GB

  I get a screen that shows no space and I can't install it further.

  Is my question there a way to install it and provide the controller before or during the boot with ESXi 5.5 driver

  Please advice

  Thank you

  Intel C600 is taken in charge, but only in the disk controller. NO raid-controller. C600 is Intel chipset. It is not dedicated hw-raid controller...

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• During the installation of a wireless mouse, the 'New Hardware Wizard' appears unnecessarily!

  During the installation of a wireless mouse, the "New Hardware Wizard" pops up, and more than a half a dozen times looking for the pilot.  I installed the driver from the disk provided by the manufacturer.  Actually, the mouse works correctly and doesn't have another driver not found.  Someone has suggestions for the "new hardware found" stop?

  Hardware devices do not work or are not detected in Windows

  Does that help?

• Material up to date Assistant, MTP device an error occurred during the installation of the device

  I have a problem installing the driver for my mp3 player. I get this message after I try and install "" there was a problem installing this device: MTP device, is an error occurred during the installation of the device the specified service does not exist as an installed service. "" Even if I uninstall and re install the driver, I still get the same message. What could be the cause of this error message?

  My operating system is Windows XP home

  Original title: update Hardwre Assistant

  Hi D.L.B1,

  • What is the brand and the model number of the MP3 player?
  • Other USB devices are connected to the computer works well?

  You try to manually add the MP3 player to the computer and check if it can help solve you the problem and if the MP3 player is detected.

  You can access the link below and follow the steps in the article to manually add the material to the computer.  When adding the verification of the material if it appears two devices one by one for device MTP and other USB Mass Storage Device. If it shows both, select the USB mass storage device from the list and try to install it and check if that helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_start_hardware_wizard.mspx?mfr=true

  If the problem persists and you cannot install the MP3 player, you can contact the manufacturer of MP3 and check if you need to make changes to install it and if they have the latest drivers to install.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• T420: H310 PERC Setup driver during the installation of Windows 2008 R2 SP1

  Hello

  I try to install the SP1 of Windows 2008 R1 on T420. However, it does not detect the disk and asks me to load the Setup disk.

  Now, I downloaded the driver from: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1HHG8&fileId=3389750350&osCode=WS8R2&productCode=poweredge-t420&languageCode=EN&categoryId=SF

  Put it on a key USB and then the wizard to detect the USB but then he said: 'no signed device drivers were found.

  Reading carefully above the driver download page, they mentioned the installation instructions, it is shown how to load the driver during installation.

  HOWEVER, the real problem lies here. These instructions are for a '. '. ZIP format"driver. Considering that, they provide only ".". EXE format"from the driver to download.

  So, regardless of teaching the highest page download driver to load the driver during the installation does not work.

  And I could not find where to download the '. '. ZIP format' driver.

  Could you help me please. What I'm missing here?

  Thank you.

  You must use this driver:
  http://ftp.Dell.com/FOLDER01460337M/9/SAS-RAID_Driver_R2_4R5XT_A03_6.801.5.0_ZPE.exe

  Run it to extract the content, then put the content on a USB flash drive to use during the installation.

• An error occurred during the installation of assembly__ ' Microsoft.VC90.CRT, version = "9.0.21022.8", publickeyToken = "1fc8b3b9a1e18e3b", _ processorArchitecture = "x 86", type is "win32".

  I am running Windows Home Premium x 64

  I received this error when you try to install software: an error occurred during the installation of Assembly
  "Microsoft.VC90.CRT, version ="9.0.21022.8", publickeyToken ="1fc8b3b9a1e18e3b"

  processorArchitecture = "x 86", type = "win32".  See Help and Support for more information.
  I've done several hours of digging, but all I could find relating to this is for Vista, but that's what I could find:
  the Trusted Installer is running with a 3 (manual) setting in the registry
  I renamed my C:\Windows\SoftwareDistribution directory
  I run the installer by cleaning and painfully crossed the line-by-line entries and got rid of the old stuff that hanging on.
  I removed any installation of dot net I found and then ran the Win 7 Dot Net Fix Tool and then reinstalled 3.5 SP 1
  I uninstalled all the Visual C++ runtime components as well.  Now, when you try to reinstall the hours VC ++ Run, I get this momentum.
  I'm really tired.
  Here is the result of the dd_vcredistMSI7D41.txt file in my (severely truncated) temp directory
  [code]
  MSI (s) (D8:88) [04:09:01:577]: installation error (sxs): Please look in component based newspaper on maintenance located a-167844744ndir\logs\cbs\cbs.log for more diagnostic information.
  «Info 1935.An error occurred during the installation of assembly ' policy.9.0.Microsoft.VC90.ATL, version = "9.0.30729.1", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type = "win32-policy"" See Help and Support for more information. HRESULT: 0X8007054F. Assembly interface: IAssemblyCache, function: UninstallAssembly, component: {4E546509-41FF-349D-BF4B-CBED508E19E5}
  [/ code]
  I also see in the file:(severly truncated) C:\Windows\Logs\CBS.log
  [code]
  2010-04-02 04:09:01, error SXS Transact2 pending content detection failed with 0x8000ffff
  2010-04-02 04:09:01, info SXS uninstall Assembly: Microsoft.VC90.ATL, version = "9.0.30729.1", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32"
  2010-04-02 04:09:01, info SXS submitting uninstall transaction
  2010-04-02 04:09:01 00000242 awaiting CSI content of transaction information must be resolved, cannot start another transaction again
  2010-04-02 04:09:01, error CSI 00000243 (F) E_UNEXPECTED 29652 # of Windows::COM:CComponentStore:InternalTransact (...) [gle = 0x8000ffff]
  2010-04-02 04:09:01, error CSI 00000244@2010/4/2:09:09:01.518 (F) d:\w7rtm\base\wcp\componentstore\com\store.cpp(4389): error E_UNEXPECTED from function Windows::COM:CComponentStore:InternalTransact expression: ((HRESULT) 0x8000FFFFL)
  [/ code]
  Can someone please help with this?  I've seen messages like this all over the web, but nobody seems to know anything.  I pray that the Member States did.

  Hi Carl.P,

  SE for focus in the right direction, please provide the following information:

  (a) what program are you trying to install?

  (b) do you use the computer as an administrator?

  You can follow the steps mentioned in the link below that relates to a similar question

   

  Troubleshooting C/C++ Isolated Applications and Side - by - side Assemblies

  http://msdn.Microsoft.com/en-us/library/ms235342.aspx

  (Done mentioned steps refers to Windows vista, same procedure applies to windows 7)

  If the problem persists, please visit the link below to find a more appropriate community to help you solve the problem

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB