No internet connection possible WRT54G2 v1.5

Similar Questions

• No internet connection found WRT54G2

  I have modem BEFCMU10 and replaced my wired router (BEFSR41) with WRT54G2 wireless router.  I basically took all the connections between the wired router and put exactly the same thing in the wireless router and it does not find the internet connection.  I use Comcast cable if it has something to do with it.  So I put the wired router on and it works fine.  One thing... Photo and instructions says to use the BLUE cable to connect the computer to the router.  With the wired router, we used the BLUE cable to connect the modem to the router.  Right now, just trying to implement both our PC like wired and use the wireless for my Smartphone.  I buy adapters wireless at a later date for the PC.

  Thanks for any help you can provide.  It is much appreciated.

  Try this:

  1. check if you can get online directly connected to your cable modem.

  2. press and hold the reset of the router for 30 sec.

  3. cut OFF the power to your Modem and router.

  4. connect the Modem to the internet port on the linksys router then connect your computer to one of the numbered ports of the linksys router.

  5 turn on the power to your modem and wait 15 sec and then turn on your linksys router.

  6. check the LED - power/WLAN/INTERNET/ETHERNET PORT router

  7. check if you can get online wired to the router

  8. If it is online. Access the Setup page of the router by going to the 192.168.1.1 address using your browser then go to the submenu and choos MAC address Clone set it to activate and then press the CLONE button.

  9. check the State and get the IP Internet address. If you have an IP Internet check address so you can get online. Otherwise, try to renew IP. Still no Internet IP, contact Technical Support for Linksys

• CC without internet connection possible?

  Alrighty, so it's a little tricky.  I supervise teams right now both are always on CS4. I got initial positive feedback to lead the effort to buy Creative Cloud to teams.  However, there is a MAJOR issue that would prevent us to do so, in turn ask to get an overview on possible solutions.

  Many people use machines that are severely locked, high security, NO outside internet access is allowed, no connections to external devices, etc. In short, these machines are used as part of our deployment process of development (for more than just Web sites) and the only machines that can be used to deploy the code. Details aside, there is virtually no chance to open these machines for internet connectivity.

  If we want to update these machines of CS4 to CC, is there a way to install without internet connection (like downloading of executable files and deploy via intranet)? Adobe has a solution around the Internet "necessary"?

  At the present time, it is a contract of minimum 5 years we'll have to ramp for in the coming months and personally using CC, I see the benefits of pushing our teams him to be used for virtually all (web, graphic design, video editing) in the House.

  This is an OPEN Forum, with several members of the Adobe staff who answer questions

  I think that you need a direct connection to Adobe...  Adobe contact information - http://helpx.adobe.com/contact.html

• Is it possible to make Internet connection sharing by the command line rather than the GUI on Windows Server 2008?

  Hello world!

  I need program/reset sharing Internet connection by the command line rather than GUI tools under Windows 2008 Server (could be a .cmd to run startup script or the programmer). Is this possible? Or there is some registry keys I need to set/restore and restart some services?

  Thank you very much.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• WRT54G2 slows down the internet connection

  Hello.

  Somehow, my WRT54G2 router slows down my internet connection. My PC is connected by cable and I cannot watch youtube videos and gave to wait fo 20 seconds for gmail to load up. If I connect the PC to the modem directly then everything works fine. Reset to the default router configuration solves the problem for a few weeks, but this solution is quite annoying. Is there another way to solve this problem once and for all?

  Thnx.

  In the latest version of firmware notes, it is written:

  -updated with the patch to solve the problems of ping

  I'll try to update my routers firmware now, if this will fix my problem, I probably won't respond to this thread more.

  Router support page:

  http://homesupport.Cisco.com/en-us/wireless/LBC/WRT54G2

  Firmware release notes:

  http://homedownloads.Cisco.com/downloads/WRT54G2V1.5_1.5.01.013_FwReleaseNotes.txt

• WRT54G2 - no internet connection

  I have just replaced my WRT54G with a WRT54G2 router.  I used the same settings that were on my WRT54G.  Everything works fine as long as I have the blue cable plugged into my computer and the other end into Port 1 of the router.  As soon as I disconnect the blue wire from my computer, I lose my internet connection.  My computer connects to the router with no problems, I just can't connect to the internet.

  I checked and double checked all the settings on my computer (in network connections) and the configuration of the router (192.168.1.1) page and they are identical.  My settings worked fine on the previous router, but for some reason, I am unable to connect to wireless internet with the new router using the previous settings.

  Any ideas?

  Yes, you are right, reset the router and re-configuration it makes a big difference...

• IS IT POSSIBLE TO USE THE SAMSUNG SGH-A927 FLIGHT II AS A KEY INTERNET CONNECTION? HELP ME IF YOU HAVE A SOLUTION.

  IS IT POSSIBLE TO USE THE SAMSUNG SGH-A927 FLIGHT II AS A KEY INTERNET CONNECTION? HELP ME IF YOU HAVE A SOLUTION.

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page of answers (English) v -click and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After possible Trojan, now all of a sudden, I lost my internet connection.

  I am far from an expert on the computer, so when I got this message that a Trojan was tryiong to infect my computer, I knew exactly what to do.  Now, I can not connect to the internet.  I hope there, can someone help me, I live on social security and I can't afford any more tickets, so if you can help I would be very grateful... Help!

  If the Trojan horse causes this problem, then it is advisable to run a full scan of the system. To do this, use a PC that is able to connect to the internet and visit:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Download scanner for your windows, then copy it to the device, such as flash memory removable or external hard and copy it to the PC with the problem and launch the analysis complete the system.

  If it detects anything please post the name of the Malware back and remove them and then restart your PC.

  Alternatively, you can try to contact your Internet service provider to help you with an internet connection.

• How to prevent the download of the images (when the internet connection is bad)

  In ancient times, it was possible to download only the text, no images, in order to speed up downloading of Web pages. Now I can't find the 'switch' to do this. My problem is that sometimes - when I'm on the (German) campaign - internet connection is so bad that the download takes a long time or fails completely.
  I use firefox with ubuntu 39.0...

  This option is no longer available in the standard options, but it still exists in the advanced configuration. 'Text only' value, enter "subject: config" in the URL bar, accept the warning, search for "permissions.default.image" and change the value of 1 (default) 2. To restore the display of images, even to change the value from 2 to 1.

• "No DNS server," "PPPOE server," "Internet connection" - WARNING amber

  I'm troubleshooting on iMac my parents - there is a problem with the configuration of the Airport Extreme. The iMac is fully updated.

  During the configuration of the airport, I get this chart:

  

  Under 'Of Carol Airport,' I can't seen to change the State of the servers DNS, server PPOE and Internet connection. The iMac works fine without the airport connected... but when you're connected, I get these errors.

  How solve the three errors and get the router working again? Please provide very detailed responses, if possible. Thank you!!

  The problem lies in the device upstream 'Carol airport'.

  Reset by it turn it off and leave it like that for a few moments. Internet service providers often suggest disconnect their cable from their device as well (not the Ethernet cable between it and the AirPort Base Station - please leave one connected). There should be no need of power towards the low 'of Carol Airport', but there is no harm in doing so, either.

  Then, connect it to power again, and reconnect the cable if you disconnected it. Give it a moment to start to finish. Connect the "Carol airport', if you we turned off.

  Please proceed to configure the AirPort base station by following the instructions.

• Internet connection Cox Cable &amp; Airport Extreme

  I had the last three or four months a problem with Internet cable fall suddenly. All the lights on the modem cable have no problem with the modem. The Airport Extreme base station has a green light, as well. I have to keep resetting the modem cable 3 - 4 times a day. The ISP is Cox Cable.

  It affects all the iPhone, phone Android, iPad and other Apple computer, we have. All lose connectivity at the same time. If I connect to the Mac mini directly to the modem cable by the cable network the internet connection gets dropped without using the WiFi network.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  2. what else can I check or try to fix it?

  Airport Extreme: How would I test for a problem with the unit master of AE? The only thing I can think to do is reconfigure AE units and using one of the older AE devices as master and see if that makes a difference, but it's a headache to do if there is an easier way.

  Our WiFi network consists of a base station Airport Extreme 802.11ac with two base stations older AE acting as slaves to the base ac station to expand the network throughout the House. All base stations are running the latest firmware from Apple (7.7.3 & 7.6.4 on two more former slaves). The light remained green for disconnects. We have previously disabled IPv6 in Airport utility on the base station to avoid potential conflicts with the Cox' months before the start of this issue of network.

  Cable modem: Motorola MB 7420 - Cox says he could be the modem, so I bought a new modem cable Motorola MB7420 to replace the former Motorola cable modem - always have the same reduced connection problems. The cable modem shows any change in status or lights during connections has dropped, but only reset the cable modem seems to fix the problem. The two modems are not any lights/status change, but there is no internet connection, even if a computer is connected directly to the cable modem once the connection is released. I kept it connected and had it remove the connection to the internet again after resetting the modem (hours between the drops).

  I tried to connect a computer directly to the modem cable with a network cable and had the same problem, so I thought that I had deviated from the Airport Extreme base station as the problem. Now Cox claims that something came out last week, discussing the problems with Apple routers and cable modems or their network. I can't find anything, but they are supposed to send me information later.

  Coaxial connection: Cox is not finding any disconnection or time in their voting for our modem registers. We had three times to check the lines as he first seemed extremely windy Cox and had a problem before with problems connecting to the pole. Who was waived. They tested the connection between the pole and the cable modem, and we get a signal strong; some problems on the survey for our modem logs (every two hours). There is no water in the connections between the pole and the House. We have checked all the connections of the coaxial cable between the outer box and the cable modem. Cox is to revisit all connections around our House to see if they can find no evidence of a problem upstream or downstream from our part.

  Network cables: I replaced network between the cable modem and AE cables as well as AE to a computer next to him - no change.

  1 does anyone know conflicts between modems Motorola and Apple Airport Extreme networks?

  There are at least two known issues with Cox here on Apple's Support communities:

  1. Cox started the IPv6 role. The current workaround is to configure your AirPort base stations to use IPv6: link-local only.
  2. The series of Arris/Motorola SB61XX modem is incompatible with 802.11ac AirPort base stations (potentially, 802.11n models as well.) This is not bad in themselves, they just don't "play well" together. I have not heard of all reports on the series of MB74XX... so maybe it's not the question on this point.

  To test the incompatibility, check the ARP cache. It must contain only around a dozen entries. Considerably more could possibly indicate a problem.

  Run the network utility > Netstat tab > select the option "Display routing table information" > click Netstat

  Note: For OS X El Capitan, network utility can is located in Macintosh HD > system > library > Basic Services > Applications, OR via the Apple Menu > about this Mac... > system report > Tools menu of System Information > window > network utility

  To change the IPv6 configures your airport most convenient base stations you use AirPort Utility, as follows:

  From a Mac:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the Internet tab and then, select Internet Options...
  • Change the IPv6 configuration to: link-local only
  • Click on save and then click Update.
  • Allow the base station restart.
  • Do this for each of your base stations.

  Starting from an iOS device:

  • Tap the AirPort Utility to run it.
  • Select the base station.
  • Press Edit.
  • Tap advanced.
  • Tap on IPv6.
  • Change the IPv6 configuration to: link-local only
  • Type actually.

• Why have I no internet connection, no cell phone, no wi - fi on the iphone after updating ios 9.3.1 5?

  Why have I no internet connection, no cell phone, no wi - fi on the iPhone 5 after update to iOS 9.3.1?

  Settings network is possibly damaged.

  Tap settings > general > reset > reset network settings

  Then see if your iPhone can connect to a Wi - Fi network.

  You will need to enter your Wi - Fi password.

• Satellite P850 - no internet connection to help to win 8

  Can someone help me?
  I have just upgraded to Windows 8 on my Satellite P850 and now, according to what I'm trying to do, it is sometimes said that there is no Internet connection.

  I certainly link strong, because it works very well in the new application of Internet Explorer, Norton 360 and Windows itself. But it won't work in other things on the desktop, such as iTunes, the Toshiba Upgrade Wizard, Internet Explorer on the desktop, Safari etc.

  Why is this? Of course the most important thing is the Toshiba Upgrade Wizard, but that's not very far because she needs an Internet connection.

  Please help as soon as POSSIBLE. If you need additional information, let me know.

  Hello

  This happen using LAN or WLan?
  If you have problems with internet using WiFi, I recommend that you check the connection to the local network.

  In addition, you must make sure that your software installed and other affect t tools don with that 8 to win in some cases it could be a problem software that are not compatible with Win 8 preinstalled.

  I also see that you have Norton installed check if installed security tools don t affect the internet connection!

• L755 satellite internet connection drops but stilll connected to the network

  Hello

  I hope one of you can help me. I have a laptop 13 q Satellite L755 nice for a year and a half.

  My problem is that I surf the net and suddenly my internet connection drops down. On Firefox or IE, I have a message with a triangular signal yellow saying: "your connection has be revived."
  I'm still waiting on my network but I can't access the internet.

  The strangness, is that my family other PC or laptop have no problem on the connection.
  This happens on the wifi and cable. At home or other places of connection.
  In France and the United States. So my conclusion is that there is a problem with my laptop.

  I looked around some forums. It seems that some have a problem with IPv6.
  I have disabled the option to use IPv6 on my laptop, but I still have the problem.

  Another comment: I play the Kingdom of the fortress online.
  Sometimes I disconnect from this game but I can still surf the internet for a few minutes before undergoing a total disconnection.

  Looking forward for your help.

  As this happens using WLan and LAN its really hard to say why your connection is interrupted.
  Have you tested the internet connection with fresh preinstalled system?
  I mean it is possible that some software / updates received or installed in the past it would affect.

• How to share an internet connection broadband on the Satellite A200-1VG

  Hello
  I am very new in the world of laptops, 3 days old. In fact, I have a desktop computer (the OS is XP Professional) and just bought my self a Satellite A200-1VG (the OS is Vista).
  In my view, is it possible for 2 machines to share a connection high speed, but how I do not know. I must admit to be pretty ignorant when it comes to technology (you have probably gathered that now) and I ask that any given notice will be given in the language too technical.
  Thanks in advance for a novice.
  EGP

  Hello

  Of course, you can share the internet connection with 2 computers.
  If you have a WLan router, you can connect a computer to the LAN port and the laptop can be connected via Wireless LAN.

  You can also connect two computers to the LAN port. Some routers support two (or more) of LAN ports and assign TCP/IP addresses automatically.
  If your router supports one LAN port you could buy a Hub (or switch) for more LAN ports and connect multiple computers.

  Lastly but not least you can connect to the laptop of desktop PC, but the PC needs to be equipped with min 2 LAN cards.

  I would recommend a little goggling for more details. I m you will find some useful articles.

  Good bye