No internet, no sound after recovery

Similar Questions

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• 3110CT no sound after installing XP Pro

  I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.

  Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.

  Help, please.

  Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.

  If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.

  You bought this Portege as a second hand unit. Am I wrong?
  So maybe the sound card is faulty.

  The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
  Check if you can find an audio driver XP in internet.

• Cannot download programs and basic games after recovery.

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  All of a sudden we cannot download programs of basic games, after recovery we cannot not even down load dap download eccellerator!

  can help us, that's happened is that during the last 5 days.

  Hi Eric,.

  Chances are, something happened during the recovery process that prevents you from downloading something on the internet. One of the most common reasons for this is that the security settings are set too high. See the link below to learn how to change the security settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-security-settings

  Another reason that you might not be able to download whatever it is could be the settings you have enabled in your anti-virus program, if you are running one. If you are, try to disable the program while you download those

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• No sound after upgrade to Vista on U-series of satellite - solution

  Hi, I had the problem that I had no sound after upgrade to Vista Business.

  After several attempts to get a solution from Toshiba I found myself.

  Here are the steps to resolve this problem:

  1. update the Bios to version 3.5
  2 do a clean install of Vista
  3. install the added value of package
  4 install the audio driver
  5 install the patch "mute off".

  Should work now.

  Hey wow, it's really nice. Already bookmarked it. :)

  We users and me (freak ;)) appreciate good solutions.

  THX dude

• Qosmio X 870-152 - no sound after random freeze

  As the title says my laptop no sound after a random freeze,.
  with the loss of the sound also came the problem that I can not use my setup more that it does charge more.

  I can also levels below configuration screen as my system.

  Solver of problems Windows says that windows audio or an audio endpoint builder does not work propaly, but will not be can not solve

  If anyone has an idea of what I can do or what happened please tell me

  T is not easy to tell exactly what is happening on this virtual path.
  When your Qosmio freezes you have to like what's next? To restart Windows OS or what?
  Is everything OK again when your Qosmio restarts?

  You know that's not easy to understand exactly what is happening. Is there an error message?

  Maybe you should reinstall OS and test functionality with the 'settings '.

• No sound - after the installation Win7 sp1

  I have no sound after win 7 sp1 app nor can I press FN - F6 to activate the sound. Any ideas?

  Thank you

  I forgot how I solved it, but it has been resolved. Thanks for the review

• I will always have the possibility to access Internet through IE after downloading Firefox?

  I'll always be able to access the Internet through IE after downloading Firefox? Check the very simple answer without too much "tech-ese" thanks.

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.5 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Yes. They are separate programs, and you should have no problem using to access the Internet through.

• Partition lost after recovery - Satellite L30

  I had two partitions on my HD (Satellite L30-114).

  I used the Toshiba recovery Cd to restore windows back to my laptop. The CD has not offered me a full mode or an Expert as written here http://support.toshiba-tro.de/kb0/FAQ350072001GR01.htm he has just recovered without any input on my side!

  After recovery, Windows does not see my second partition. I used the disk management utility, and it is said there are 17 GB of disk unassigned space (this is my second Partition!).

  Can and how can I restore it?

  TX a lot!

  Hello

  It seems that the L30 comes with a new version of the recovery cd.
  I think that the recovery procedure is a bit different than the old with 2 different recovery modes (standard and expert)

  I know a little new recovery procedure because a friend of mine bought a new Satellite with this recovery CD. He asked me for the installation of the laptop and we checked.

  It seems that you must press the setting button after the language selection.
  If you n t use the button setting for the configuration if the recovery procedure will be remove and erase everything on the HARD drive. I think you didn't configure the settings and therefore all the partitions have been deleted.

  Unfortunately I think that there is not much to do. You the partition has been deleted and it of not possible to bring back the lost data.

• Windows does not start after recovery

  Hey, satellite 1800 started son to have more and more slow to the point where it took close to an hour to boot in Windows. It got to the stage where it seemed that recovery from the CD was the only road - so we did. Everything had to look successful from the point of view of recovery but the installer of Windows XP displays "Please wait...". "with the normal activity of the disc looking for 20-30 seconds and then hangs - no disk activity, the mouse is not responding. I went through the recovery in "expert" mode and don't see any problems with the recovery process. Issues related to the:
  1 no matter who else seen elsewhere?
  2. what else can I do diagnosis-wise?
  3 which, basically, the recovery process not / (fact he re - format partitions, could it have left a virus?)
  4. I'm better h/w or s/w diags?

  Bitshifter

  Hi Bitshifter,

  topic of your question 3:
  The recovery process replaces the whole HARD drive or even a partition with an image created by Toshiba. This image contains an operating system, drivers, and a few basic programs. All other data (including viruses) in this partition will be deleted.

  question 4:
  I don't know the cause of your problem, but I think it's a hardware problem, because after recovery, there may be incorrect or missing software.

  Sorry I can't give you more information.
  Good luck!

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• No sound after upgrade to Vista on Tecra A8

  Hello.

  I just upgraded my Tecra A8 to Vista. I used the the repostitory of driver Realtek driver, but I do not get the operation.

  I searched by google that and found a help: I need to activate the Stereo Mix in the sound menu. Now, I see the activity in the speaker bar, but again the speakers say nothing.

  When I try to use the actual drivers from realtek, Stereo-Mix is "not available" because the unit was not found...

  Someone at - it the same problem? Or better: someone has a solution for this?

  Thank you

  Welcome,

  Rena? Â ©

  Hi Rene

  Seems that this utility allows the sound again.
  I found the same information here in this Toshiba document we:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=1886758&BV_EngineID=cccdadd mlmmjhefcgfkceghdgngdgnn.0

  Best regards and I would be really appreciated your comments

• Re: No sound after install Vista - Tecra M7

  I improved my Tecra M7 to Vista (and then upgraded to Vista SP1) but the computer is no longer plays sounds (no music, no sound system - nothing)

  I installed the latest Realtek HD driver, I have the latest version of the Bios.

  Device Manager indicates that everything is working. "Speaker" icon tells me that his work (the green bar follows the beat of the music)

  The volume & button Mute works - I can't get the "speaker" modifying, turning to the top/bottom/inhibition icon. I tried the headphones in and out.

  I checked the bios if the sound card has been disabled it - but it seems that there is no possibility to change the settings of the sound card in the bios.

  Does anyone have an idea on what I'm doing wrong here?

  Maybe I can help you;

  I read on a sound problem after installation of Vista it happened if XP was preinstalled on your laptop and the mute box was accidentally activated.

  [No sound after upgrading to Windows Vista: http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm]

  Check the Toshiba TSB article tool

  Concerning