no internet tv after installation of the usb tv tuner!

Similar Questions

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Slimware download files can be deleted after installation in the programs?

  Slimware download files can be deleted after installation in the programs?

  Hello

  Do not download in the first place.

  Read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/Driverupdate-from-Slimware-utilities/d016d4a2-7ac4-467e-B07B-59058e7827e2

  See you soon.

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• LR4 RC2 is necessary after installation of the LR 4.1?

  LR4 RC2 is necessary after installation of the LR 4.1?

  N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.

• Internet connection lost because of the error of the Ethernet controller after installation of the OS

  OK, I installed Windows XP3 Pro on Windows XP2 Pro on my computer of friends because of severe virus problems. However after installation, the controller Ethernet, video card, etc. also took out drivers. The computer manufacturer is no longer available, and some drives are available with these drivers. So is it possible to get the drivers on the system in order to restore the Internet connection? How can I determine what drivers to install?

  Open "Device Mamager" and search for points of question marks (?). Also make a list of all the drivers that are listed.

  Uninstall SP3: How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249/en-us

  If you still have a restore point made just before you install SP3, I'd
  Uninstall SP3 and then use the system restore, I hope that the combination will
  get you where you want to be.

  Now open the Device Manager"again and compare the list of SP3 for what is currently enrolled. Now you have a list of these drivers you need.

  Don't forget the video drivers: visit the download of the manufacture of the graphics card: download and install the latest Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• 52 for USB Composite device driver code (can't check signature of driver) after installation of the updates of August 2014 on Windows 7 x 64

  After you install the updates of August 2014, my keyboard/USB wireless mouse has stopped working, and the receiver is marked as "Device USB Composite" with code 52 - cannot verify the signature of the driver.

  Really, the usbccgp.sys to Windows 7 file is not signed (unlike Windows 8.1), but I've never had a problem with this until recent updates.

  Unfortunately, these values are not in the key "reg" you have asked. (Note: I no longer feel the question).

  I managed to solve the issue of the restoration of a restore point, and at that time system that has pulled the update KB2982791 - I wonder if the problem has been caused by that.

  With all the other August 2014 updates installed, the issue did not reappear.

  

• MacBook 2007 crashes after installation of the software

  HI all, I have a 2007 MacBook running snow leopard.

  OS X 10.6 (Snow Leopard)

  Office 2011

  2.0 GHz Intel Core 2 Duo

  2 GB of RAM

  120 GB HDD

  I recently tried to install the software provided with spin, the usb controller algorithm Djay to he... Don't know what year, but loaded on an older MacBook running snow leopard...

  Once installed was happening while the software would not be responsible, so I uninstalled, deleted from applications... Now desktop freezes a few minutes trying to do something, it is mainly trying to open anything on the toolbar...

  Any advice would be appreciated, thanks

  You try boot in safe boot mode? SHIFT key is pressed after chime

  Start, and if you hold the key in the correct way and timely, you may need to

  to provide your admin user password to continue in safe mode.

  May have removed the essential parts of the system while it was trying to

  delete the troublesome app; Thus it is likely a reinstall of the OS X.

  In addition to the troubleshooting & using Find to locate all parts of this application

  who could survive, could be performed. Also, you might try it and see that the
  Console logs suggest, according to the exact time/Date of broadcast. --

  You might see if Disk Utility could repair permissions on the hard drive. This

  is different from that of an attempt to repair the hard drive.

  You may need to start the computer from the DVD Snow Leopard system to

  see if you can then use disk utility in the options menu of the installer, then

  See If you can repair the hard disk using this version of disk utility.

  Otherwise, you need to maybe reinstall from DVD and then upgrade the system to 10.6.8

  This shouldn't erase your user account. However, applications that are

  in your user account that might have been part of this problem, can be activated.

  Applications from websites can be problematic. Some of them may contain odd

  bad software tips; According to the reputation of the source, adware, malware or elements

  No wanted or expected can upload with results very unexpected.

  It may be better methods to solve problems or solve this problem. To find out what

  current may require looking at the system logs, among other things.

  The application did not have an uninstall program? If you provide your user password

  during installation, it may request a detailed correct uninstall in order to not

  damage to the other sections of the system. The applications folder is a place to look, if included.

  Good luck!

• KB976325 update does not connections to internet sites after installation

  Update cumulative security for IE 7 for XP, KB976325, is always my IE guarantee so I can't access any websites.  My only solution is to uninstall the update.  I had to change my update settings, so I can choose which updates to install so that it stops the installation.  Can someone tell me why this update won't allow me to access the internet after the installation?  Also, I can't use Firefox because of an update but I can't understand that one.

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

  NOTE: If KB976325 is NOT installed, go to step 4.

  2 uninstall 'Security for Windows Internet Explorer 7 (KB976325)' via Add/Remove Programs (make sure the box show updates at the top right) and restart.

  3 d - c #1 above.

  4. go to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g. KB976325).  If an update of root certificates is listed in the category of the optional software updates on the left, install it to enjoy greater security of IE7.

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Best installation of the USB driver of practices for non-persistent clones

  Hello

  are there best practices using non-persistent clones and USB driver?

  Client A connects to a linked clone and connects a drive USB flash or something else.

  The installation of the driver is horrible slow on Windows 7:

  • New device found...
  • looking for a driver in driverstore...
  • installing the driver software...

  Tested now and it took more than 8mins.

  After installation, the appliance is ready and can be used. But after disconnecting from the desktop computer updates and each driver installation must be run again at the next connection. We have disabled the Windows updates and specified do not search Windows Update for device driver locations. (Policies-> models-> system administration / Installation of devices-> search order specified for the device driver source locations).

  Clues, why it is so slowly installing drivers and how to prevent the reinstallation of drivers every day

  Thank you and best regards

  Well,.

  We have set. VA was the problem...

  We excluded analyzes the demand for processes drvinst.exe.

  Thank you

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.