No level meter, majorly frustrated with nothing on the web that helps the

Similar Questions

• Opening screen of Sage 2012 remains aft with nothing on the taskbar to indicate that it has opened.

  Original title: how a program to start on top?

  I just upgraded my package Sage accounts-wise, 2012 and the opening screen remains at the back with nothing on the taskbar to indicate that it has openeed. I talked to their support Department, but they say it's a matter of Windows. I use Windows Vista Business.

  Hi AlanBaker,

  You can try the following strps and see if it helps.

  Method 1:

  You can open the Task Manager and check if the program is running. If this is the case, stop the program and restart again to see if you can access it.

  For more information, you can consult the following articles:

  What is the Task Manager?

  Exit a program that is not responding

  Method 2:

  If you're still having problems, then you can check if the problem occurs in the new user account.

  Create a user account

  If the problem does not occur then check out the following link to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Hope this information is useful.

• Can I charge a completely 'clean' version with nothing of the past have been postponed. I've been hacked and do not want to get Vorstan automatically on my system? Thank you

  I've been infected with Vorstran (or Vorstan?) several months ago. I would like to reload Firefox now that I have everything straightened out on my computer, but in the past when I had to reload Firefox, all my old bookmarks, is back. (They must be registered to load for me next time I keep to recharge?) Not wanting to put Vorstran on a reload, I was hesitant to try to reload when it arrives, it infects all browsers, crushes my backups and usually locks in the system, I can get a completely clean version of Firefox to load to start over completely? I don't want to bring something to the front of the past at all. No book mark, bookmarks, folders, nothing. Do somehow so I can finally again use my favorite browser? My old email which is now closed, has been "[email protected]. I had to change to the current "[email protected]". How to get a completely clean version of firefox? Thank you
  Dennis Bloomquist

  _{Edit: removed personal information for your protection. (philipp)}

  See:

  • http://malwaretips.com/blogs/remove-pup-optional-vosteran-virus/

  The Firefox profile folder is located here:

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\------(main profile)
  • C:\Users\ < user > < profile > \AppData\Local\Mozilla\Firefox\Profiles\------(cache)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Frustrations with Premiere Pro CC 2015 - any help?

  The installation of cc2015, I came across things that are different and are quite frustrating, cc2014. Any ideas on how to change small behaviors to act as they did?

  1. When you mouse click and highlight a bunch of clips to move upward and backward on the timeline, in cc2014 you can move the playback cursor to a different location on the timeline, by clicking on the workbar, and as long as you aren't not clicking on a track or another clip, all your clips stay selected. Now, when I move the playhead, while the clips are selected, it automatically selects a clip which is under the read head and deselects all the clips that I had highlighted.
     1. It is also different behaviors when you add keyframes for a photo, such as make the pan and scan. If I add my starting keyframe in the window effects, and then click the down arrow to go at the end of a clip to add the keyframe position, the playback head is now in a different clip and it still, automatically selects the next clip which is under the read head and deselects the clip I was working on dispelling all its properties in the effects window. Basically I want the read head in order to stop the auto-possibilite select the clips that I did not choose with my mouse, just as he did in cc2014.
  2. Error message from the bottom window on the right keeps popping up on my sequence whenever I get an error message, e.g. a programmed correctly Ae effects won't load does not, missing or audio if I extend a clip cut longer than ever before, he was on the timeline. I just want this popup go away. I can click on you if I want to read to you. Any ideas on how to disable this option?

  Overall however, some nice improvements. Here the morph Cup would work on shots that contain no faces (aka, would be cool for the VFX transitions and reveals).

  Hey Kevin,

  Sorry for the trouble. I'm not in front of my computer right now, but I remember there is a parameter that turns off.

  1. click on the sequence menu and then uncheck the "Read head follows selection" (or something similar)

  2. it can also be disabled in the preferences. The pop-up notification window is displayed by default. If you want to stop, deselect Show event indicator under the General category in the Preferences dialog box.

  I hope this helps...

  Regalo

• "Scanner in use" with nothing in the process

  Printer HP Officejet Pro 8600 Plus, wireless, Windows 7 laptop

  Just receive and put in place yesterday.  Scanner has worked a few times, but then got an error message "the scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image. "Problem is that there is no a process task.  Tried to cancel all the projects of the printer and tried unplugging the printer to reset.  Still the same message.

  Success!  Downloaded the print and Scan of the doctor and he revealed that my scanning driver did not communicate with the printer, but the resolution has not corrected the problem.  I was directed to the HP site customer service, where I downloaded a new driver package and the problem has been fixed in the end.  Scanner works now.  Thank you!

• Frustrated with connection to the browser blackBerry smartphones

  When I try to browse the Internet, I've recently started having a popup box that says: "this is a problem when trying to render the page.  I was not able to connect to the Internet for about 4-5 days.  Can anyone help?

  Is it with any site? First, try to reset the device by removing the battery for a minute and try it.

• Major problem with functions on the color Lumetri color tab

  For some reason that I can't access the color Lumetri functions under the label of color in the new Premier Pro update 2015. I can see fixed base, Creative... ect... ect and click on the link next to each, but when I try to expand an it shows me the section for a split second then closes to the top!  Sometimes when I restart the program I can expand these sections and play with them until they start to get blocked again. Can someone help me with this please? now something, I might be able to link to the situation (or maybe not) but when I go in the activity monitor and close the QT server) and then reopen first I am able to play with the color again for about 2 minutes before it all locks in place. I tried to do an uninstall and reinstall.

  

  I have a touchpad and it was a problem of mouse for some reason any when I tap it would be double tap...  When I tried a new mouse, it works beautifully. For a reason, it's the only part of the application it operated.

• HP mini 210-1032cl. I have a new hard drive with nothing on it. I don't know what to do.

  Someone sold me a mini 210-1032cl without hard drive.  I bought a hard drive on ebay.  Where should I go from here.  I can't access anything on my hard drive with disk management.  I did some research and saw the formatting and partitioning of hard drive using disk management.  But how to do this with nothing on the disk?  Which is the best operating system I can buy which also has an Office suite (if there is such a thing)?  I'm trying to restore the mini without breaking the Bank.  I will soon go to College and I need to get my mini operational as soon as possible.  Apparently, this mini was Windows 7 Starter.  I tried the HP Support, but it is so confusing to me.  I don't know what I'm doing.  Thanks in advance for your help and your insight. Forgive my ignorance.

  Hello:

  My recommendation is to click on the link below, and then click to expand the line of order recovery media, then click on the blue button more details and order the recovery disks that are going to install the operating system, software and drivers originally came with the laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4125470

  BEFORE YOU ORDER DISKS... Two important points to note...

  1. you will need a USB DVD drive to use with the recovery discs.

  2. the hard disk that you purchased should be the same storage capacity or larger than the original drive came with the laptop.

  The original specifications drive was 160 GB.

• Help! Connection of Vista then screen goes balck with nothing else than the slider

  When I start my computer it comes up with Windows Error Recovery - with the following options

  • Safe mode
  • Safe mode with networking
  • Safe mode with command prompt or
  • Start windows normally

  After each of these options, it will come with my login page, once I typed my password the screen becomes completely black with nothing on the screen but the cursor!

  Please help me fix my computer! and connect!

  Hello

  You can recover your files by putting the drive in another computer in secondary drive or one
  external enclosure you can back up files - then put the drive in the computer and move forward
  According to the needs.

  Have you tried to use the Safe Mode by pressing F8 repeatedly?

  BlackScreens are very difficult to manage and you may need help a computer shop (no leeks
  and displays a BestBuy or other BigBox stores) or the manufacturer of your system Support.

  Rob - bicycle - Mark Twain said it is good.

• BlackBerry Q10 Major problem with update (10.1.0.4181)

  I tried to do the update last night (10.1.0.4181). Once completed the update let me know that I had to restart my phone (standard) that I did.

  However, the reboot happened--got stuck on 100% loading screen (sitting for about 25 minutes). Do you have a battery pull and I tried again and this time it loaded and said my update was installed successfully - but when loading, there was clearly a major issue. The hub does not (just a black screen). When I try to open anything it opens--the box appears to say THAT BBM then everything stops, and then the entire phone will be closed and reboot.

  Even if I try to leave (not load anything) it keeps restarting itself. The longest I have had on is about 2 minutes.

  The update is not complete. It still shows my most recent software like being10.1.0.238. If I try to resinstall the update it just freezes at 0% and stops after 2 minutes.

  I tried to do a security wipe but it did not work so far - sitson the screen saying an erasure of security is ongoing, then just the boots down and when it restarts all my apps are still there (even if you can not open anything).

  I also tried to plug it into my computer and try to do a factory reset on BB link, but because the phone keeps himself restart the computer continues to lose the ability to communicate. In the middle of the attempt to reset it will come with a message saying that the computer can no longer communicate with the phone (usually right at the time, it is set to zero). I tried already to many battery grips and it recharges, and nothing has helped.

  I'm running a Q10 SQN100-3. My version of the software appears as 10.1.0.238, and I had no problem with my phone until I did the update last night for 10.1.0.4181. Any suggestion at this point would be helpful I thought I want to solve my problem with a factory reset, but with this problem of communication arise each time it resets which seems to not even be an option.

  Update:

  After a few tries, I finally got a security wipe, which resolved nothing. The phone is then in a never-ending cycle of starting with the introduction of screens.

  I finally downloaded autoloader and used that to wipe the OS and reinstall. Worked like a charm and the phone now works correctly.

• Sound level meter

  Someone at - he found a way to bring up the new sound level meter?  Surprisingly, there is nothing in the help on this PDF.  I found the effect in the track mixer, but cannot find a method of appeal place real meter.

  Put the effect on your final and double output bus click on it.

• Major bug with storage Var MX 7.0.2 Client?

  I think I found what looks to be a pretty big bug for client variable storage in CFMX. Strangely, the bug actually exists in CFMX 6.1 and CFMX 7.0.2 (the two versions, I test against), but only cultures upward in 7.0.2. In addition, you will notice that I say it's a matter of client variable (it is), but the bug seems to be with JSESSIONID, I thought only relate to session variables. My statement of the problem is that the variable customer 'disappear' after having been defined. In a Word, I log onto my site, which fixed a couple of variables customer, and then when I browse another page on the site, client variables are no longer in existence (it seems as if I've never connected before). I'm running CFMX 7.0.2 Enterpise (deployment of WAR) on Red Hat Enterprise Linux 4.0 (update 3) using the internal JRun web server and using J2EE session variables.
  
  After a bit of detective work, I noticed by looking at the HTTP headers on my first visit to the site (with no existing cookie set) which JSESSIONID is defined * double * when I first hit my site. However, a JSESSIONID is being stored in cglobal table while the other JSESSIONID is stored in the actual cookie, which causes subsequent research of incompatibility. Therefore, it seems that if I have never connected before.
  
  Here are the relevant header information when you first visit the site:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 102; expires = Thu, August 14, 2036 13:20:27 GMT; path = /.
  Set-Cookie: CFTOKEN=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5;expires=Thu,14-Aug-2036 13:20:27 GMT; path = /.
  Set-Cookie: JSESSIONID = 583033e973025152237c; path = /.
  Set-Cookie: JSESSIONID = 58306b4060d425456d5c; path = /.
  Date: Tuesday, August 22, 2006 13:20:27 GMT
  Content-Language: en-US
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  See how there are two directives Set-Cookie JSESSIONID? The interesting part is that CFMX 6.1 (on Solaris, at least) is exactly the same, as long as the Set-Cookie guidelines double go. However, here's where 6.1 MX and MX 7.0.2 differ...
  
  If you look at what's coming in the real cookie compared to what is stored in the column 'data' in the table cglobal MX 7.0.2 you will see (based on the header above information):
  
  urltoken = CFID #= 102 & CFTOKEN #= d 66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5 & jsessioni #= 583033e973025152237c #lastvisit = {ts' 2006-08-22 09:20:27 ""} #timecreated = {ts ' 2006-08-2209:20:26'}#hitcount=2#cftoken=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A72840 6 FC 5 #cfid = # 102}
  
  The key bit is the JSESSIONID value, that has the value 583033e973025152237c. However, the cookie JSESSIONID value is 58306b4060d425456d5c.
  
  The same comparison with CMFX 6.1, the HTTP header info:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 3499; expires = Thu, August 14, 2036 13:31:50 GMT; path = /.
  Set-Cookie: CFTOKEN=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1;expires=Thu,14-Aug-2036 13:31:50 GMT; path = /.
  Set-Cookie: JSESSIONID = 86308f1257484a747d6c; path = /.
  Set-Cookie: JSESSIONID = 8630627b049162583e68; path = /.
  Date: Tuesday, August 22, 2006 13:31:50 GMT
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  And this is the value of cglobal.data column:
  
  urltoken = CFID # 3499 = & CFTOKEN #= 525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1 & jsession id #= 8630627b049162583e68 #lastvisit = {ts' 2006-08-22 09:32:03 '} #timecreated = {ts ' F8E1 2006-08-2209:31:50'}#hitcount=9#cftoken=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8 #cfid = # 3499}
  
  And the cookie JSESSIONID value is 8630627b049162583e68.
  
  Note the key change in behavior between 6.1 MX and MX 7.0.2? 6.1, even if the two Set-Cookie instructions were updated, the logic of client variable storage at least systematically used second JSESSIONID value. In 7.0.2 it appears that the first JSESSIONID value is stored in the table cglobal while the second JSESSIONID value is stored in the table cglobal.
  
  This is where the plot gets complicated still further... Even if my client variables are not returned on the following clicks through my site (he tells me I'm not connected), values for CFID/CFTOKEN/JSESSIONID are * not * re - put on each page. In fact, if I query the cglobal table directly out of my CFID/CFTOKEN, hitcount and lvisit values are actually updated!
  
  It is a major obstacle in our migration process. Can someone dig a hole into my configuration/logic and point out something I am doing wrong? The craziest part about this, for me, is the client variables which disappear even if it looks like the culprit is the JSESSIONID value. I even tried to extinguish the J2EE session variables and exactly the same problem occurs.
  
  Kind regards
  Dave.

  AAAAAAAARRRRRRRGGGGGGGHHHHHHHH! I got it!!!

  I am frustrated with Adobe right now, but I finally got inside the client variable issue. You know how the accession of ColdFusion is believed to be cumulative? Yes, well, not so much. It turns out that the CFMX 7.0.2 release is available with 3.3 DataDirect JDBC drivers. In addition, it seems that something in the client variable code between MX 6.1 and 7.0.2 regressed so that updates of the client variable under the hood has broken with all pilot pre - 3.5. Once I updated to pilots of 3.5, everything worked, including the spy feature and the variable updates the customer.

  Adobe, this must be resolved as soon as POSSIBLE. It's a huge show-stopper for site using client variables. I don't know if it is limited to Oracle because I have other RDBMS platforms to test against, but is a big problem. The difficulty here is update installation programs that are downloadable from your site with 3.5 drivers * and * update 7.0.2 Release notes note that the game 3.5 driver isn't in any downloaded bits before every time that you update the installation programs.

  Jochem, thank you very much for your persistence in helping me through this issue.

  Kind regards
  Dave.

• Frustration with updates: what about emoticons

  As a student at the University of Texas Tech, I am frustrated with the change of the emoji barrel of a gun to fire squirt. While your intentions may have been good, end gun violence based on a change of a single emoji clearly won't happen. The spirit of our school is hampered online because we can is no longer ' Let's raise our guns! Other schools, like the OSU and customers are frustrated. I request a review. How is someone supposed to take the Texas Tech Almighty seriously if I put a gun to squirt on my post of the day of the game?

  RE - looking for a change

  Thank you

  You do not discuss Apple here. This is a user to user support forum. Back to Apple goes here http://www.apple.com/feedback and click on the box in this area.

• My Yahoo cursor has changed to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back?

  My Yahoo slider went from arrowhead to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back? 8.1 (latest) Windows and FireFox (latest).

  You're not referring to auto scroll?

  • Tools > Options > advanced > general: navigation: "use autoscrolling".

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.