Help! Connection of Vista then screen goes balck with nothing else than the slider

Similar Questions

• No icons, taskbar, nothing other than the slider and a screen empty.

  I am running Vista Home Edition with Service Pack 2.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Screen goes gray with lines

  My Dell Inspiron 3520 screen goes gray with horizontal lines during use. This reminds me of an old television set, except the lines do not scroll. Everything started after I upgraded from 8 to 8.1. I was wondering if anyone had any ideas on how to solve this problem? Thank you

  I agree with the upgrade to windows 8.1 as the origin of the problem. If you check the video card, you will see that it is a 3000 graphics card intel. You will see that the upgrade has changed the driver to one for January 2014. I did a back roll of this driver. On my machine, she restored a driver with date of September 2013. After that the computer was OK all night so I think it solved the problem. Appears there is something wrong with the driver that is loaded with 8.1.

• my laptop screen goes black when opened more than 50 degrees

  my laptop screen goes black when opened more than 50 degrees.

  I have a hp pavilion dv4-2145dx, windows xp. No changes have been made recently.

  Could be bad memory.  How old is it?

  Test the memory with a test in the BIOS.

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

• After the welcome, the screen goes blank with the pointer of the mouse only.

  little time later virus scan comes up, by clicking on the close X Open IE to their web site, giving me access to the internet. Some time the error message later "host process for windows services stopped working and was closed". Occationally œuvres "error loading c:\windows\system 32\newdev.dll dynamic library initialization routine links (DLL) failed" safe mode. Tried windows recovery of F8 boot minimum, sfc/scannow, chkdsk/f/r, windows recovery disk, fix software reg, norton 360. Can open my computer browser, tried to run solitaire open saved the game box, but no other graphics. Reduced browser windows appear at the bottom of the desktop. Running vista Home premium service pack 2 on toshiba satellite L355-57902

  Given that safe mode works, start in safe mode and do a system restore to a restore point before the show.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Note: If the system is infected with the virus, the system restore would NOT remove the virus.

  What resulted sfc/scannow? He did a report errors?

  Registry patches are false and I advise anyone using these cleansers to stay away from them.

  Have you had the chance to do a safe mode virus scan?

  Try ESET (http://www.eset.com/online-scanner) or a virus scan online Kaspersky (http://www.kaspersky.com/virusscanner).

  Download Malwarebytes anti-malware and scan your computer (from safe mode with network that is):

  http://www.Malwarebytes.org/

  Finally, do a repair installation:

  Vista - repair for Vista installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Back up all your data and do a clean install, if you feel that your computer be compromised anyway.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• laptop HP 2000: screen turns black with cursor indicating after the password is entered first turning on pc

  Bought this pc at Wal-Mart-mart December 2013, it's a 2000 hp notebook pc with windows 8 when you turn the pc press the keys to enter my password of the user, and after I entered my password screen goes black except the white arrow, proposed by the mouse pad will not do anything after that

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics test your hard drive and memory.

• problem with Panel menu on the slide show in full screen!

  On one of my page has a slideshow full screen which is connected to A master page where I menu

  Panel and when I type a snippet of the slide show I can't see menu although I sent the show to back!

  You must create at least two layers while placing the Menu on the master to the top layer in the layers panel and place the slide show full-screen placed on a content page in the second layer (under the layer containing the widget Menu). See the following article on the use of layers that should clarify things more far - http://helpx.adobe.com/muse/tutorials/layers-muse.html.

  Thank you

  Vinayak

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• After logon, screen goes blank and only cursor appears, and then screen goes back to normal

  Hello..

  IM sharir of Malaysia...

  I am currently running windows vista Home premium sp2... with processor Intel (r) Core (TM) 2 Duo CPU P7450 @2. 13 GHz... 4.00 GB of RAM... my system is 32 bit OS type...

  My problem is when im turn on my computer laptop everything seems fine but the problem is that after I log on my screen vacuum become and only my cursor appear... after 1 minute of waiting my windows reappear as usual... only this problem occurs whenever I connect... so what should I do... ?

  In addition, I have scan my computer with Kaspersky Internet Security 2011...

  Hello aqua9teen1,

  Go to control panel, click Action Center. See if there are errors listed there. You may need to expand to see all questions.

  Then I'd suggest that you update your video drivers. If you have a computer that you purchased in a retail store, then you can go to the computer manufacturer and see if they have updated drivers. Or you can also go to the manufacturer of the adapter driver updates and videos.

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• age of empires II gold edition screen goes black and nothing happens

  After I installed my Age of Empire II gold Edition I clicked to play the game, the screen turns black like its going to work then it fails just and do not work alsoi have window 7 Home Premium 64-bit.  Can someone help.

  Duplicate the content of the Post-

  AOE age of Kings the entire screen turns and shows the signs of AOE, but then she's just completely fails

  Hello, I had a problem and I know I'm lightyears end 2 post but AoE is like my favorite series and I finally got my old fav of kings gold edition version, but it does not work on my windows 7 home edition. Of course, it installs fine. But when I want to play 2 whole screen turns and shows the AOE sign, but then it just completely fails after that so if someone can help me u can give me advice on how to fix 2

  I downloaded the demo version of AoE II and it works without problems with the following parameters: 'compatibility mode', the value Windows 98 / ME (XP will not work), "run as administrator" and (perhaps not necessary) adjust your firewall settings to allow this program run on private networks. As always, do not install older programs in folders protected system (C:\Program Files or C:\Program Files (x 86)), choose a different folder target installation instead.

• How to clean a laptop HP DV8 fans, screen goes black with overheating?

  Black goes screen occur when heat from the CPU reaches 100 degrees, which is 20 to 50% overall CPU activity, for example to watch video on a brower, whatever safe or normal mode you start. . Since blackscreen started 4 months after I bought the dv8, I prefer not not the material had failed and would rather follow the instructions and clean the fans finally dusty.

  But I could not open the laptop, even after the removal of every screw, does anyone know how to open these laptops?

  
  # A once that the user disappointed had finally, after 157 overheating closures
  # DV8 1050es W7x64 HP I7 Q720 Let's believe computers are simple

  It seems that the solution is about to decommission the flashplayer from adobe in order to avoid an overheating so blackscreen.

  The numbers go like this:

  current version of flash is 10.1.85.3, use 15% + _50% non-stop CPU reaches temperatures 100 degrees, which is bad

  old version 10.0.12.36 uses 7% 15th % nonstop CPU 95 degrees, what is the best

  Remember triggers of 100 degrees blackscreen, the screen is off, it is always possible to turn off the computer with the appropriate key combination. If you do not maintain the temperature rise then shut down the system, the protection feature of blocking screen is unnecessary because CPU continues to operate at the same speed in this case, the same occurs also in mode without GPU.

  That's pretty good work, but I m sure low enough the downgrade, the temperature is low.

• Some Web sites can not access, screen goes white with http 500 errors

  Original title: http 500 errors

  Salvation; Please forgive my PC literacy is near the bottom of the range, but I recently started getting errors. I can browse the Web, but when I log on say Web site common CBSSports and try opening a session I did a million times - the screen blanks out and tells me unable to access Web pages and when I ask for more info... I'm getting http 500 Internal Server Error. It seems to get worse and unable to access less Web sites. Can someone please help?

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are unable to browse Web sites with http 500 errors. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. what web browser do you use?

  2. have you made any recent hardware or exchange of software on your computer before the show?

   

   

  Please follow the methods below if you use Internet Explorer and check the number:

  Method 1:

   

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

   

   

  Why are some pages blank or incorrectly displayed in Internet Explorer? :

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

   

   

  Method 3:

   

  Get help with website (HTTP error) error messages:

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-website-error-messages-HTTP-errors

   

  I hope that the information above helps you.

• Recently, my screen goes to power saving mode when the computer is used.

  This does not happen on a particular site... it's pretty random.

  The computer does not turn off but the only way to get the monitor back on is to restart the computer.  Any ideas what could be causing this?

  I did, but still having the problem.  Thanks for your help!

  Looks like the defective video card/cable eventually.  Could be power issues or motherboard as well.