NO LOAD BUZZIING BACKROUND SOUND

Similar Questions

• Problem loading Z2 and sound problem

  Hello

  I was facing this problem recently where I'm wrong took the magnetic cable sony and plugged incorrectly on my Z2 xperiz.

  This was after the 5.1.1 update.

  All of a sudden, my phone did not start using my power of sony Bank and a charging cable quick, that I got afterwards upward and running.

  But the battery drains now how anyone, regardless of the use less.

  A battery that is used for the last days 1.5 with me now barely lasts 9hours without doing anything.

  The battery keeps fluctuating when it reaches 90%.

  A change in two outlet stores, z2 specific cables have not helped

  Three repairs, a new image, two complete resets didn't help at all

  Second question

  The sound is all of a sudden considerably low,

  I have the sony mdr-nc31e, which seems to be much lower than what it was in.

  Once again the repairs did not work, the Equalization does not seem to work any longer.

  and the sound does not seem to come from a speaker from a two, this is the model D6502.

  What is your opinion on that?

  Although the Sony forums have failed.

  I ran a check with the voltmeter.

  What has been found, it's my battery did not receive enough power and this kept fluctuating.

  Given a sony Center who said that I need to replace a battery.

• (GER) SWF loading and lose sound

  It is the same project, but I feel that these two issues could be addressed in the same way. I have for sovereign wealth funds, let's call them 'Main' and 'Challenge '. Challenge has its all, except one, exported for that in the first picture, as I have several ACEs triggered events (onSoundComplete) that moves the read head. However, the size of the file became a little big (about 6 M), so we have added an external preloader, but now the sounds do not play. Similarly, 'Hand' calls for the 'challenge' for level1 after an onRelease, and audio also went to compeltely. So we are back to square one and try to understand if the preloader should be incorporated in the "challenge", but also to avoid the issue with her challenged level1 above 'hand '.
  
  How to do this? Help!

  When you create your sound instance, replace

  var something: Sound = new Sound()

  with

  var something: Sound = new Sound (this)

• Sound does not load after upgrading to El captain

  Hello

  After upgrading my iMac (late 2009) to El captain the sound no longer works. Trying to open the preferences-> the error message appear that this could not be loaded. Other sounds associated with apps like audio / midi set up crashes.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• dynamically loading the sounds she draws to a .swf

  Is this possible in Actionscript 3 to have a bunch of sounds in the library of your .swf you can dynamically load? The sound.load() seems to be something external to the url. I would like to ask you a whole collections of sounds in the libarary a fund sovereign and then dynamically chosen one I want to play when running.

  :

• How to stop loading sound? my_sound. Unload or something?

  I want the sound to stop loading when I press the stop button, I have:
  
  var my_sound:Sound = new Sound (_root);
  my_sound. OnLoad = function() {}
  my_sound. Start();
  };
  preload_btn.onRelease = function() {}
  my_sound.loadSound ("some_sound.mp3", false);
  };
  stop_btn.onRelease = function() {}
  my_sound. Stop();
  };
  
  Say I click on the 'load' button, the sound starts loading, when I press the 'stop' button, the sound should stop playing, but I want also to stop the loading, maintains its load of given URL, it loads in the background and making the network traffic. I can only resolve this by giving my sound an empty file loading, but it must be in a different way, right? Something like my_sound.unload?
  
  Thank you.
  Adrian.

  use:

• updated firefox, and now it will not load

  I updated firefox last night and now my icon has changed to a blank sheet of paper and will not let me load firefox

  Sounds like something went PEAR somewhere along the line. I would suggest relocation like this:

  • Go to Download Firefox 4.0 and download a fresh install on the desktop file.
  • Then go to add/remove programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  • Reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
  • Finally, run the downloaded installation file.

  After completing the installation, go to the Plugins check page and those if necessary updated.

• MacBook Pro is super slow since yesterday and does not load now

  I went to use my MacBook yesterday and it was to be extremely slow and after hard resetting (by pressing the power button) about three times, it was fine. Now today, I turned on my MacBook and now the progress bar will only about 60-70% of the way and then stay stuck there. I restarted once and it was still stuck. I restarted once more go in safe mode, but it was not completely load again. I found another discussion about a person having a similar problem and I have reset the NVRAM and still it will not load.

  sounds to me like your HD is a failure...

  You have a clone of external start to test?

• How to use the original sound system in my laptop?

  My Toshiba Satellite laptop came loaded with Realtek sound card and speakers. I added something to my computer that has added another audio system. When I looked in 'Device Manager' then sound all I saw was "High definition Audio Device" and did not have a Realtec. HDAC should Realtec as audio device have been replaced. The Realtek High Definition Audio Driver and Realtek USB 2.0 card reader are always listed in "programs and features. How can I make my sound legacy Realtec main?

  Theresa

  Is it the same in the two sections below?  Honestly if your sound does not work, I wouldn't touch it. But otherwise, head to the Toshiba site and re-download the original pilot.

  

• When I plug my headphones I get backround music but no voice, what's the problem?

  A few days ago, I remove the headphone jack of my computer with my foot. Since then the headphones aren't working properly. Looks all backround sounds like music and the basic sounds of windows work but if there is no speaking voice distant and distorted sounds.

  Hi Revan,

   
  You are able to hear the sound from the speakers with no problems?
  
  Check if the headphone jack works fine. Check with another helmet if you are able to hear clearly.
   
  If you are using a desktop computer, then connect the headphones to the audio jack back of Panel audio jack front panel and check.
   
  Note: If there is no question about the speaker then, I suggest you to connect with another computer and look for the question, if yes, then you need to contact your manufacturer to get the headphones replaced or repaired.

   

  For more information see the mention of the article below.

  Connect one microphone, music player or other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• How to make the background sound auto replay when the user back to the page?

  Hello. I do a flash project using Adobe Flash CS6 and AS3. Add background sound in every scene. However, I had put a single command to the sound of bg to stop in every scene. But the problem is when the user back to the previous page, the sound does not play. Anyone knows how to wow the background when the user returns without any power button etc.? Thanks in advance!

  var mySound:Sound = new Sound();
  mySound.load (new URLRequest ("sound.mp3"));
  mySound.play ();

• SoundJS with Flash HTML5 Canvas - break sound & update the lib?

  I'm looking to do some basic audio control in the Flash timeline, exporting HTML5 canvas.

  On the frame of 10 I am loading/reading a file with:

  audio1 var is createjs. Sound.Play("Sounds/course3_mod1_2.mp3");

  Who plays, but then I can't figure out how to make a pause as the beep several frames later at a briefing of the animation to a timeline. I read that there is a method. pause() methods, as well as chassis 50 that I use:

  AUDIO1.pause ();

  This does not work for me - I must be missing something pretty obvious regarding variables references on the timeline...? In the console of Firefox, I see the JS error:

  ReferenceError: audio1 is undefined.

  If it's important, the process of publication included "0.5.2.min.js", although I do not have the latest version of CA is "0.6.0.min.js". I'm also very curious how I would update my CC Flash (version 20141) to use this latest version of the library compared with older he current attaches to the HTML code. I guess I can (in the publication settings) uncheck the option 'Hosted libraries', and then manually download new libraries and replace them in the folder. But not this crushed with each publication? And what happens if I still want a link to a hosted version the later?

  somascope wrote:

  On the frame of 10 I am loading/reading a file with:

  audio1 var is createjs. Sound.Play("Sounds/course3_mod1_2.mp3");

  Who plays, but then I can't figure out how to make a pause as the beep several frames later at a briefing of the animation to a timeline.

  That cannot possibly work. If it worked, it is no more. The SoundJS, the documentation is very clear that "before you can play a sound, it must be saved.» You need to do something like this:

  // create global alias to main timeline for event handler
  _main = this;
  // wait for sound to preload
  this.stop();
  // assign load event handler
  createjs.Sound.on("fileload", handleLoad);
  // load and register sound
  createjs.Sound.registerSound("mysound.mp3", "soundID");
  // play sound and start timeline playing
  function handleLoad(event) {
      _main.audio1 = createjs.Sound.play("soundID");
      _main.play();
  }
  

  Then, to put in pause/resume, follow these steps:

  this.audio1.paused = true; // pause
  

  this.audio1.paused = false; // resume
  

  Reference: is there a pause() method? · Number #200 · CreateJS/SoundJS · GitHub

  Note that var creates variables that have only the scope of the framework. To the current scope of timeline, you must use this..

  If it's important, the process of publication included "0.5.2.min.js", although I do not have the latest version of CA is "0.6.0.min.js". I'm also very curious how I would update my CC Flash (version 20141) to use this latest version of the library compared with older he current attaches to the HTML code.

  DO NOT do it. Each new version of Flash CC publishes the files that target a specific version of the CreateJS library, so try to cram in a different version will certainly break things. But why you are still using Flash CC 2014? You should be able to upgrade to CC animate.

• Stop the sound at the click of the mouse in Actionscript 3

  So I have this code, I want the sound to stop when I click on the Start button, but when I click on the Start button, the sound does not, but its volume is decreased, it's very weird. If anyone can solve this?

  var mySound:Sound = new Sound();
  mySound.load(new URLRequest("Sounds/Sound.mp3"));
  var channel:SoundChannel = mySound.play();
  channel = mySound.play();
  StartButton.addEventListener(MouseEvent.CLICK, StartGame);
  function StartGame(e:MouseEvent):void {
  channel.stop();
  gotoAndPlay(2);
  }

  The code that show you should not have any effect on the volume change.  I don't know what happens after the call to the play() twice method however.

  Try to change these two lines so that you only call the play() immediately method...

  channel: var SoundChannel = new SoundChannel();

  Channel = mySound.play ();

• random animation + random sounds and background music

  Hi guys!

  I am new to AS3, but I have to do this project for the class, and I really don't understand how to do it.

  I searched the forums and the internet, but did not find a lot of information. I found most of this code on the Internet however, and while I understand very well, I master AS3 enough to program myself.
  Could you guys please help me a bit with this?

  That's what I'm trying to achieve:

  • Background music loop in the back, which begins with the opening of the swf file and never stops. I think I've realized that, with this piece of code:

  import flash.media.Sound;

  import flash.net.URLRequest;

  import flash.media.SoundChannel;

  BG music

  var music: Sound = new Sound (new URLRequest ("music1.mp3"));  same folder

  var sc:SoundChannel;

  SC = music.play ();

  One thing though: it would be cool to put in a loop, and I don't know how to do this.

  • I also need various small audio clips to play randomly above the aforementioned background music. I use this, which works a little, but I would like to have more control on the randomness. Ideally the clips should not play twice in a row. I don't know how to do this.

  import flash.media.Sound;

  import flash.net.URLRequest;

  import flash.media.SoundChannel;

  import flash.events.Event;

  songs of the var: Array = new Array ("sound1.mp3", "sound2.mp3");

  Sound: sound var;

  var soundChannel:SoundChannel;

  var randnum:uint;

  function playsong()

  {

  RandNum = Math.Floor (Math.Random () * Songs.Length);

  Sound = new Sound();

  Sound.load() (new URLRequest("sounds/"+songs[randnum]));

  soundChannel = sound.play();

  soundChannel.addEventListener (Event.SOUND_COMPLETE, playrandomsong);

  }

  function playrandomsong(e:Event)

  {

  playsong();

  }

  playsong();

  • Finally, I need to move from frame to frame at random to play different animations. For example:

  Project starts, background music starts playing, we hear random sounds played one after the other, while some animations are visible on the screen, playing in random order.
  I don't know how to do this.

  Thank you very much for your help! I'll try to find out on my own, but any help will be appreciated.

  use a Boolean value to prevent the execution of code:

  var alreadyExecuted:Boolean;

  {if(!alreadyExecuted)}

  alreadyExecuted = true;

  .

  . code you want to run only once, regardless of how many times this frame is entered

  .

  }

• Modular sound function

  Hello

  I'm a newbie in AS3.  I'm doing my quiz tutorial as modular as possible.  Is there a way to earn his modular.

  For example, I have several instances of movieclip to right_mc (for answers)

  I have this code on each image with the right_mc button:

  var soundReq:URLRequest = new URLRequest ("rightanswer.mp3");
  var sound: Sound = new Sound();
  Sound.load() (soundReq);

  sound.addEventListener (Event.COMPLETE, onrightComplete);

  function onrightComplete(event:Event):void
  {
  Sound.play();
  }

  Is it possible to make the above modular code so that it is a reusable function?  In this way, that I wouldn't put on each image in the correct answer. I was thinking something like this (but it does not work):

  good answer button sounds
  var rightsoundReq:URLRequest = new URLRequest ("rightanswer.mp3");
  var rightsound:Sound = new Sound();
  RightSound.Load (rightsoundReq);

  rightsound.addEventListener (Event.COMPLETE, playRightSound);
  function playRightSound(event:Event):void
  {
  right_mc. Sound.play();
  }

  playRightSound (right1_mc);
  playRightSound (right2_mc);
  playRightSound (right3_mc);
  playRightSound (right4_mc);
  playRightSound (right5_mc);

  I understand.  my suggestion is best.

  in frame 1, place:

  function playSound(mp3:String):void {}

  var s:Sound = new Sound();

  s.addEventListener (Event.COMPLETE, soundloadCompleteF);

  s.Load (new URLRequest (mp3));

  }

  function soundloadCompleteF(e:Event) {}

  Sound (e.currentTarget). Play();

  }

  in any image where you want to play appropriate sound, use:

  playSound ("rightanswer.mp3");

  in any image where you want to play a bad sound, use:

  playSound ("sad_trombone.mp3");