no Ministry of education then a card encryption?

Similar Questions

• Programmatically determine if micro sd card encryption is enabled

  I create the code that needs to require that the micro sd card has encryption enabled on it.

  I so need programmatically determine that it is activated and if it is not my application must then leave.

  (1) is there a way to tell?

  It would be better if there was a way to tell which of the 3 types of encryption is enabled.

  (2) if it is not a way, so is there a way to make sure that the BES has set a strategy which tells the BlackBerry this micro sd card encryption must be activated?

  Thank you

  Unfortunately, there is no mechanism in place today to allow you to determine if the contents of the SD card is encrypted or you can determine if a policy is in place to force encryption of the SD card on the device.

  That said, the encryption on the SD card is intended to ensure the content of the SD card when removed from the unit.  The user would have full access to all content on the SD card and would be able to copy the files from the SD via USB Mass Storage without encryption.

  It is for this reason that we simply put in place encryption in the API itself (JSR-75) rather than expose APIs for what he.  If you consider your content to the need for additional security, I encourage you to encrypt the content yourself based on the Crypto API on the device.

• Smartphones blackBerry media card encryption password

  Hey I was wondering if anyone has had this problem and it is solved without spending hours on hold for technical support...

  So, after making a total deletion, my media card has now been encrypted.

  It seems to only affect the music and other media from the storage file, that sort of thing.

  so whenever I try to sync no matter what, I can't access it, and I get this message.

  "A memory card has been inserted that contains the encrypted files. "Please enter the device password that was used to protect these files:

  The problem is; the password that I used before she was destroyed must have been, well, deleted... AAAARRGGG!

  So he does not have a password I used previously as valid...

  Does anyone know a quick fix for a smartphone of the curve?

  WOOOO_HOOOO!

  I found the solution... A little, I feel a bit stupid that it took 11 days to understand this one but when available from the help pages "boards" are so vague, I guess you're delivered to your own...

  K so, all you need to do if you find your card encrypted... and you went in options - security options- encryption and clicked disable and it still does not work...

  Go to options - security options - Security wipeand you will have three options to wipe - you will be asked. emails and contacts (which is automatically checked, uncheck the BOX IT!) the user installed appsand multimedia card... run the first two are NOT checked and DO check the media card and then click on the delete button.

  After that you will need to re - synchronize your blackberry using the desktop software installation program, make sure you open all the options re-sync (calendars, contacts, etc.) and that's all you need to do... music, photos and videos should all be restored!

  Oh and btw, just turn on your firewall should generally be sufficient protect your phone against pirate being,... .of you would have to turn it on manually... it seems that most people don't and that's what gets in trouble in the first place... btw this Board is only for series of smartphone curve 8530 as far as I know in all cases... dunno if it will work for other models.

• The external sd card encryption

  On my old Nokia phone, I was able to quantify the external SD card. But the e bike supports encryption of internal memory IE rom only. Can someone tell me please the procedure to encrypt the external memory card.

  If you do not see as an option to encrypt the external SD card, then he's gone. I think that Google it removed in a version.

  This could be because the users have been lose access to all data if the phone resets.

• Problem in opening a card encrypted database

  Hello

  I'm having problems when trying to open a connection to a database sqlite stored on the SD card. I'm moving the file from database on the network when the application is run first, and if the phone is set to encrypt files from media card then it is written with the suffix ".rem". Then I try to open a connection to the database by using the following:

  DatabaseFactory.open(dbPath)
  

  dbPath here is a URI pointing to ' / SDCard/data/database.db' is the file that I downloaded on the network. With encryption disabled it works fine and I can open the database and run queries on it etc. However, with encryption on, I get the following exception:

  net.rim.device.api.database.DatabaseIOException: file not found

  I tried it change at the first glance to 'database.db.rem' in the case of encryption but then receive this error:

  net.rim.device.api.database.DatabaseIOException: decryption header error

  I don't know how to get around this, because I can't find a way to override the settings for encryption on the phone and write the file of database to the SD card without encryption. Or maybe is there a way I can decrypt the database file after writing it if necessary?

  Anyone have any ideas on how to solve this problem?

  Thank you

  It is a known problem. Fortunately, the following workaround solution should solve the problem for you:

  Instead of download the .db and then open it directly in SQLite using the DatabaseFactory class, follow these steps:

  1. create the database (file) using the DatabaseFactory class.
  2. close the database.
  3. open a connection file in the database file that was created in step 1 and 2
  4 truncate the file to 0 by calling FileConnection.truncate (0)
  5. download the database on the network and write the data in the file previously created using FileConnection.openOutputStream)
  6. close the connection files
  7. now re-open the database using the DatabaseFactory class and your SQL should work as expected.

  Creating the file database using the results in the file DatabaseFactory class *not* marked as requiring encryption.

  I hope it works for you.

• On Windows RT SD card encryption

  For my external terabyte I encrypted with my desktop computer that has Win7 on it, seemed to work fine.

  But my question is, if I didn't have a desktop computer with bitlocker capabilities, how am I supposed to encrypt my sd card I received for my Surface RT?
  She has just the 'safe recovery key' option in the application of control panel for the drive from the system itself...
  I have a sd adapter in a box at random if I REALLY need to plug it into my office, but the point is, how to encrypt using bitlocker only from the RT Surface? Is this possible?
  Thank you very much!

  Hello Jessen,

  I think that your answer is not correct.

  RT of Windows, such as Windows 8 Home, can access and use fully encrypted disks BitLocker (Bitlocker-to-go), but he cannot create or unlock automatically (that is, the user must enter the password for the drive whenever the drive is mounted).

  In addition, Windows RT automatically encrypts the drive from the system using this encryption and BitLocker can not be disabled.

  So yes, Windows RT offers a lot of encryption technology, but not the experience of BitLocker full breath.

  To answer the original question of Charles, you must encrypt the drive on a Windows Professional System 7/8 (or higher) SD and then move it to the computer Windows RT. You will need to enter the password every time after reboot of the tablet.

  Given the lack of space free on the system on Windows RT 32 GB system drive there, I find it sad that Microsoft did not have an easier way to manage the encryption of external hard drives...

• SQLite DB playback when the media card encryption is enabled

  Hello

  My application packages a pre-existing file of SQLite as a resource, that it stores at / / sdcard/databases/[appName]/db.sql.

  My problem is when users have their devices set to encrypt the media card, I put the file on the card but my application can not access or decrypt and so I am unable to use it.

  Is there a way I have my app decrypt the .sql file or keep him encryption in the first place on the map? It seems like it might be a common use case.

  I found a funky work around by renaming the .sql in .mp3, but even once, it will work if the user has media files encryption set to 'disabled '. It's not ideal, of course.

  
  

• Crypto ACL question

  Hello

  I have a star topology IPSec VPN using a Cisco ASA as the hub and a PIX506e such as the rays.

  Two of the rays also have an IPSec VPN between them.

  The hub site connects to a WAN.

  The sites of two rays have the following ranges

  Spoke 1 = 10.154.10.0/24

  Spoke 2 = 10.156.10.0/24

  Hub = 10.8.0.0/24 site - but also connects to all other addresses in the range 10.0.0.0/8 with a back end WAN connection.

  I was looking for a way to 'Nice' configure crypto ACLs so that the traffic between the spokes 1 and 2 would be direct and then everything from 10 would go through the hub site. Rather than try to clear all the subnets in 10.0.0.0/8 except 10.156.10.0/24 & 10.154.10.0/24 in an ACL.

  If I order the cryptographic cards on the RADIUS, so the most accurate is first example (the map speaks of talking), then a card encryption to 10.0.0.0/8 for hub is second, it would work?

  So we talked 1.

  !

  allowed to access-list to-speaks-2 ip 10.154.10.0 255.255.255.0 10.156.10.0 255.255.255.0

  IP 10.154.10.0 allow Access-list to hub 255.255.255.0 10.0.0.0 255.0.0.0

  !

  outside_map 100 ipsec-isakmp crypto map
  card crypto outside_map 100 match address to-speaks-2
  card crypto outside_map 100 peer set 1.2.3.4
  transform-set set card crypto outside_map 100 standard
  outside_map 200 ipsec-isakmp crypto map
  card crypto outside_map 200 correspondence address to hub
  peer set card crypto outside_map 200 8.9.10.11
  transform-set set outside_map 200 crypto card standard

  !

  Any thoughts?

  Yes, reject the order is absolutely supported. Well... I forgot about 'decline' crypto ACL

• How a GRE tunnel is applied to a physical interface?

  Within the tunnel configuration, we use the controls, the source and destination for the tunnel, but the physical interface does he know how to use the tunnel? The source code of the tunnel parameters replace the physical interface? If we don't configure a tunnel with the right source this interface would then send all information encapsulated in the GRE?

  If we also configure IPSec on the interface, and specify a card encryption to encrypt only the corresponding traffic this corresponding traffic would not use the GREtunnel or information without worrying if it was encrypted IPSec is also be encapsulated in the GRE?

  Also, I read here: https://supportforums.cisco.com/docs/DOC-3067

  'Bind the card crypto to Physics (outside) interface if you are using the version of Cisco IOS 12.2.15 software or later. If not, then the card encryption should be applied to the tunnel as well as the physical interface interface. »

  Why was it necessary to apply the crypto map to both physical and tunnel interfaces, and why is it not necessary with versions of IOS?

  Thanks for any help!  -Mark

  Hi Mark,

  When you set the source of the tunnel in the tunnel interface, the router adds the IP address of the specific interface (loopback or physical) to the GRE packet generated by the tunnel interface.

  This is useful when you need to deliver a tunnel through the Internet WILL, but the tunnel interface has an IP of priivate, if you use the interface external (with a public IP address) as the source of the tunnel.

  When remote endpoint WILL receive the packet, search interface tunnel there as destination of the tunnel and decaps the packets, and then he gets the GRE packet and forwards it to the specific tunnel interface.

  Since 12.4 you simply apply the crypto map to the interface defined as the' tunnel', usually the one connected to the Internet, where all VPN tunnels are landed. The reason for this is the endpoint VPN termination being the physical and not the tunnel interface interface.

  The reason why you need to add the encryption card for both is not clear for me, since I did not support older versions of code.

  Do not forget that when configuring a GRE/IPsec tunnel in ACL Cryptography you set the source and tunnel destination IPs.

  Hoping to help.

  Portu.

  Please note all useful posts

  Post edited by: Javier Portuguez

• Related issue of encryption-decryption Leap blackBerry!

  Hello

  In Blackberry Bond can encrypt us our data twice?

  Means that if I hello.txt in the sd card before use "Setting--> security" and privacy--> encryption--> Media Card Encryption Can quantify us this txt file using some application designed by Blackberry developer means app in Blackberry World or some other developer SNAP etc.?

  I thought of the computer which is very common that twice or three times of encryption-decryption with different algorithms, maybe I'm wrong, because there is no special data used by me except songs movies & cats!

  But as a software developer, I'm curious about encryption!

  Use AES-256 encryption & according to EETimes Blackberry claim huge time to break the encryption that made by AES - 256!

  But today I read new Dutch police 'reading' Blackberry emails

  If good authority can crack the encryption, then the bad guys also do!

  His Blackberry user feeling very precarious specailly passing other manufacturers of mobile because the only reason that is 'Blackberry is security'!

  What is this opinion experts forums or views?

  The response of BlackBerry indicates that this was 'communications' are involved. Depends on communication and used security measures.

  BlackBerry has published white papers on BBM. Those that can be found. I don't know later. E-mail will depend on the employee by the two sender security measures a receiver. Communication on the other has will depend on employee safety by the app. And finally it depends on the operational safety of the users.

  My feeling is that he is a third-party application.

  In any case, Yes, if you have an application that encrypts it's own data on the device or crypt individual files, I see no reason that could not be used in conjunction with encryption devices. I don't know that it adds anything. My there are advantages and disadvantages of encryption of file by file versus encryption of the system, but that's another question.

• Card crypto on Interface Ethernet

  Hi all

  I don't have that much experience but with VPN configs, so maybe this question will seem a bit silly. I have a Cisco 831 that I use to connect via VPN to a remote site. Everything works fine.

  Then I wanted to add a second tunnel to another location. I did all the configs needed, applied card encryption on ethernet external and everything was fine, I could connect. But then I noticed that the new encryption card has actually replaced the existing one. Of course, the first VPN was no longer works.

  Is this a limitation of the 831? Or y at - it another way to configure them so I can use the two (or even more than two) at the same time? Do I need another Cisco router if I want more than a tunnel?

  Any help is appreciated.

  Thank you

  Stefan

  This isn't a limitation of the router. But by design,.

  only one crypto map set can be assigned to an interface. If multiple crypto map entries have the same name but a different seq - num map, they are considered as part of the same set, and all apply to the interface.

  So what you need to do is create crypto-map with the same name for slot 2, but give a different sequence number. Apply this encryption card to the interface and it will work. From the seq - num lowest crypto card is considered to be the highest priority, and will be evaluated first.

• How to configure Thunderbird to send messages that are not encrypted unless I want them to be?

  I have Thunderbird set in place through gmail with enigmail and gpg4win 2.2.3 on a windows 7 64-bit operating system. I went through the Enigmail set up Assistant and unchecked 'encrypt by default', but it still sends encrypted E-mail. What don't I do?
  Thanks for help.
  Dave

  Yes, I chose the convenient encryption settings. In fact, I tried both, just to be sure, but thank you. You're in the right area and I found a way, but I'm not sure it's the best way, so if someone knows a better way please let me know. In Thunderbird, click Tools, click on account settings, click Open PGP security , then uncheck the " encrypt messages by default" clear sign messages by default and then restart Thunderbird. I don't know if it's the best and fastest way, but it does not send the message unencrypted until someone tells us an easier way. I think the key is that you do all of this through the tools of Thunderbird tab and there is no need to touch the settings in Enigmail or gpg4win. Thank you.
  Dave

• Player Flash editing and encryption

  In the past, I've encrypted a SanDisk thumb/flash drive with a right-click and then going to «Encrypt...» "but now, there is a problem: in a first time things seem to work, you choose a password etc, but they don't, and finally, there is a message"a Table of Partition GUID (GPT) partitioning scheme is required. »

  These Discussions to tell me to go to utilities > disk utility, select the flash player and then click on "Partition" in the option line (thought I would go ahead and choose a partition.) However, the Partition button is grayed out and is not available.

  So please, with a flash drive, how should we do about changing its formatting and encrypt?

  You must select erase. Format the drive in guid and chose the option to encrypt the drive as x OS Extended journaled encrypted.

• Cards and rental issues with iOS 9.3.1

  So, it seems that some iPhones have been affected by the latest 9.3.1 update when using maps and location services.

  Since my update to 9.3.1 new iOS, both of my APPS of the map no longer work.

  I went to the Verizon store and they said they had 6 other customers with the same question this week come in the store, but could not help or has a solution. They said it was a problem with the new ios

  Okay, I'll be happy to take a look with you. What seems to happen?

  Well when I enter an address in MAPS or GOOGLE MAPS at random falls a PIN for my site no where close to where I really am.

  He will say that the destination is, and then all the c apps is they state "loading".

  then the cards just freeze and there is no gps in real time or the point "you are here" never moves...

  OK, so the location is never load and if so it is not updated to become precise?

  fix

  and even when I tap on the arrow to refocus or start again the directions... just it freezes or trying to load...

  and then will never give real guidance... because my original location on maps... is leagues where I'm really... or let me down in the middle of a wooded area, etc.

  Ok thank you. I know how it is important for maps working properly! I'd be keen to have fixed too.

  I completely deleted the Google maps app and reinstalled it... with no fix... same issues

  It is a problem that we've seen happen from time to time after this update. In some cases a full restore to the factory settings and then restore a backup to the phone set. Otherwise it will be a bug problem which is released with the 9.3.2 update which should hopefully will come out soon.

  also, I backed up my phone and deleted everything with a factory reset...

  always had problems even after

  even after reset and reload the iOS again... nothing works

  OK, so it seems that yours will be the one who will have to wait for the 9.3.2 update with bug fixes for the location and accuracy.

  Therefore, it does not mater if I buy another maps application? still underway to have the same problems with the gps and location?

  You can certainly try each of them have different compatibility requirements, but we found that most of these cases concern the location services on the phone itself.

  and I can't get rid of the 9.3.1 iOS version? and go back to the old version?

  If you had a backup of an earlier version, you can restore and then use the backup of the old. Just, you lose everything that you have current data.

  Hmmm... is in fact phone... like three of my friends who have an iPhone 5, iPhone 5 c and the iPhone 6 have no problem...? ! ? ! Just me...

  It is not with all phones. It has been an intermittent case so far. There is no rhyme or reason as to why some phones have had problems with the location after the update.

  Hmmm

  If no solution... and simply live with it until a new iOS comes out, and who knows how long it will be...

  I know that the update is being developed because it contains bug fixes for a few different issues. However, I'm sorry I don't have an exact date.

  Just a question - when you deleted everything for a factory restore - did restore like NEW or from a backup?

• Laptop HP 15-AC639NG: update video card

  Hello, I would like to upgrade the video card in my laptop, but I'm not familiar with laptops. How can I find what graphics cards are compatible with my motherboard? It is worth making the upgrade or is it risky? Currently I have a R5 AMD graphics card. What other advice you have for me? Thank you in advance.

  This is a very common question and who do not earn a lot of goodwill, but the truth is there is no way to upgrade your video. Laptops have custom designed mothers and many maps that you can insert into a desktop computer are installed in a laptop by the presence of soldered chips flat on the motherboard. I want to say have you ever seen a desktop video card? How could you possibly put something like in a laptop? Some special very, very made up of games and laptops of engineering have a slot to put a flat blg video card in but no laptop of HP consumer doesn't have such a slot. Laptops that have this ability are more than $2,000 and even then the cards are not freely interchangeable as a desktop computer. So, the simple answer to your question is that you can not do. I'm sorry.