The volume control will not remain on the taskbar, XP

Similar Questions

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• Messages that appear to be malicious will not remain in the folder deletion... they simply re - appear in the Inbox in seconds.

  Evil emails will not be removed

  I have Windows XP and MSN email.  I have two emails, responses to facebook friends who seem to be malicious and will not remain in the deleted folder... they simply re - appear in the Inbox in seconds.  When I click on it, or even click on an email near them... my security appears and says that someone is trying to steal the credit card...

  Hi DougFergus,
   
  I recommend you to contact MSN support team to improve assistance to this topic:
  How to contact MSN customer service

• search engine for a single click is blocked on "search for firefox search engine ' all the time, whenever I changed it and it will not remain as google, it will return

  search engine for a single click is blocked on "search for firefox search engine ' all the time, whenever I changed it and it will not remain as google, it will return

  I want it to be as if it were before, google as my main search engine

  now its still stuck on "search for firefox search engine" which is the yahoo search engine that is really garbage

  In addition, your Firefox is identified at the forum as version 38. An update is available: this article describes how to get 49 Firefox using the "About Firefox" dialog in the menu help: Firefox update to the latest version.

  If something is holding you upgrade to Firefox 49 (or if you use the ESR, Firefox 45esr series), please let us know if we can offer you solutions or workarounds. Version 38 is not safe; Mozilla reveals security flaws after each new version.

  Sometimes Firefox reports the wrong version, because this information was frozen in a preferences file. If the troubleshooting information page shows Firefox 49.0.2, you may need to clear this incorrect information. See:

  • Use the troubleshooting information to help solve the problems of Firefox (first table should indicate your current version number)
  • How to reset the default on Firefox user agent

• : HP Quicktouch on screen has stopped working, computer will not remain once I connect.

  So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.

  Hi cavalierfanatic247,

  Thank you for using the Microsoft answers Forum.
  

  Start on Safe Mode desktop.

  Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.

  If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
  http://support.Microsoft.com/kb/290301

  If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose another restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  You have an Essentials and HP drivers disk?

  If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.

  Click Finish.

  You can see the link below for more information:

  http://support.Microsoft.com/kb/936212

  I hope that this will really help you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• LifeChat lx-3000 Volume controls do not work

  Someone please Help! I have this headset for a while now, and everywhere I look online shows the volume controls will change the volume of the headphones but they ewver seems to do is to change the volume of the SYSTEM DEFAULT of the UNIT!

  If I'm in a gam that I have to close the game to access mixer helmet from the bar windows task and edit this volume. the only way I can get the headset buttons to change the volume of the headphones is if the headset is set as the system default audio output device. »
  Surely this is wrong and I should be able to redefine those buttons to change the volume on the mixer LX-3000 NO default mixer?
  Thanks in advance
  Pykey

  Check these

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/11772089-61DF-409D-bd69-f4588cff42ee/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoft-LifeChat-LX-3000-compatibility-problem/fa2973f2-809F-4ca6-900D-f5c102701437

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Silverlight will not remain in full screen.

  Original title: fix the fulll silverlight screen

  Silverlight will not remain in full screen. full screen does not work after 30 seconds.

  Good reading this post - http://social.msdn.microsoft.com/Forums/silverlight/en-US/338a0908-6191-486b-a10a-bfe303d41dff/netflix-wont-stay-in-fullscreen?forum=silverlightbugs and see if it helps.

  There are two things to try (right click on the silverlight, permissions and check the [Properties] tab, and do the full-screen browser ( key) and then make the video fullscreen of silverlight/netflix) which may be worth a try if you don't have it already. Give it a read and see.

• Microsoft LifeChat LX-3000 inline volume controls does not not on Windows 7

  I just bought a Microsoft LifeChat LX-3000 headset, install the LifeChat 1.4 software. The headphones and the microphone are functioning normally, also the command buttons to perform a call and mute, but the buttons for the volume control do not work. I checked the HID services and they are running, also reinstalled the software and drivers but these buttons do not work.

  I use Windows 7 Enterprise (64-bit) on a Dell Studio 15 laptop.
  Thanks in advance for your help.

  Hello

   
  1. it worked before?
  2 have you made any changes to the computer before the show?
  Method 1:
   
  I suggest you to connect to another computer and check with the question.
  If the problem persists after you connect to another computer. I suggest you contact the hardware support for assistance:
  Microsoft Hardware
  http://www.Microsoft.com/hardware/en-us/p/LifeChat-LX-1000#support
   
  Method 2: run the hardware troubleshooter and see if it helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  
  Also check out the links:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  Troubleshooting: headsets
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/hardware-issues
   
  I hope this helps.

• Hard drives will not remain in mode 'sleep'

  For two weeks, something strange happens. My hard drives in sleep mode and out instantly. They will not remain in mode 'sleep'. Any hour of delay, I place, they will behave like this. So even if I place a time to sleep 1 minute, you will hear them go to sleep and instantly out every minute, without interruption. It's used to work perfectly before for months. I have not installed anything again (with the exception of Windows updates). I checked with performance monitor, if something is accessing the disks, but there is no drive activity whatsoever. I also tried to stop the process as much as possible, but that did not help either. The only thing I've changed three weeks ago was my graphics (Radeon 6850 to GTX580) but I'm not sure that the problem started then. Only two weeks ago, I noticed the issue. If anyone else has experienced something like this?

  Hello

  You can try the steps in these links:

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/06a84515-F72A-4863-87e9-73ba88e92390

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-sleep-mode-doesn

• Siri remote control controls the volume but will not turn on or turn off the tv more

  LLA Siri remote control the TV volume, but does not turn the TV on or off more. My anynet + him Cec is enabled. How can I get this function runs again. Tired of using two remotes

  That is dependent on the TV then you will need to contact their support

• Control Panel for W7 will not remain in the category option

  I had used the control panel and changed icon to find a specific option that was not evident in the category. I forgot to return to classes and eventually change the folder options in the world. Now the category parameter will not stick in Control Panel and change the options file locally or globally is not working either. Does anyone have a solution for this problem... TIA.

  --
  Eddie in Loveland

  "When the only tool you have is a hammer, you tend to treat everything as if it were a nail." -Abraham Maslow

  Not sure, but see if that helps - http://www.sevenforums.com/tutorials/262-control-panel-view-category-icons.html good read and see if it helps.

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• The volume control does not work on my Tecra A9

  Hi all

  I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.
  How to operate?
  Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top. How can I get this back up?

  Thanks Pob

  Hello

  Have you installed the operating system using the Toshiba Recovery disk?
  If not; do you have what OS installed?

  It is Win XP?
  If yes you must first reinstall the common Modules then the commands and utilities

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'