No network after 4.02 (491587) update

Similar Questions

• iPhone SE: "no service," cannot see network after 9.3.5 update

  Activated my new iphone 6 SE. It was working fine. Installed the 9.3.5 new update. Phone immediately travel to 'no service,' unable to connect to the cellular network. Can connect via wi - fi.

  Restarted. Cellular service or turned off, turn off "find my phone", reset the network settings, restarted each time. I reset and rebooted and done every suggestion I could find online short to wipe the phone entirely. I don't want to do... because then I have to reinstall the 9.3.5 update and revisit this little sweet ride, now I don't?

  Phone IS turned on; the calls do not go to my old phone, they shift to voicemail, even if your old phone is enabled.

  Advice?

  Hello

  See if there is something you have not yet tried in this support article > If you can not connect to a cellular or cell - data Apple supported

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• After the 24 Firefox update, Windows 7 64-bit breaks on reboot. The network in the taskbar icon is not ready (blue circle stopped).

  After 24 of Firefox update, Windows 7 breaks after the reboot. The network in the taskbar icon is not ready (blue circle on the wireless network icon). But I can't do much. I can't open the network and sharing Center (never opened). Even the Task Manager hangs when I click to show processes from all users. I have to do a system restore for a network working again. I never even launched Firefox.

  Wow... I finally have the solution. Windows updates have been applied at the same time I updated Firefox. Bluetooth driver is what broke (which is part of the Centrino wireless). I ended up installing the latest driver from Intel, Windows Update, and then update Firefox... and all is well.

  I thank very you much for all your help. Take care.

• My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

  My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

  HI andrewcsfan1,
  I understand that Firefox cannot connect to a network after update.

  • Difficulty of problems connecting to websites after Firefox update

  What operating system do you use? What is XP?

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Windows 7 to automatically connect to the network after the standby or Hibernate mode

  This just started two days ago after an automatic update Windows 7.  Whenever I wake up my laptop, I have to manually connect to the wireless network.  He used to connect on its own.  Not changed anything with the network or router.  I have the connection to connect automatically, but it doesn't.  He, however, automatically connect when I start the computer.  I tried all the tricks of problems of the past... I see the network and it will connect and works fine after that I have to manually connect.  Just can't understand why, all of a sudden, he stops connection.  Again, this started 2/10 after a Windows automatic update... it seems that all updates have been security patches and I hesitate to uninstall them because I don't really know what one of them is.

  Yes! I think that I fixed it. I tried all this without result. Then it hit me. Turn off the "allow the computer to turn off this device to save power" is fine and good, but what the USB port? They can do this also. "' Go to the Device Manager and do a right click, Yes, the network adapter and uncheck this box, but also do it for the" USB Root Hub "under"controllers of Bus USB.

• WiFi connection on c4580 fails after the automatic vista update windows.

  Hello

  There is a month my c4580 perfectly work on WiFi stoped working

  the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update

  to remedy this, I tried the following

  Following the recommendations of HP

  removed the Hp software and then try to install the drivers again after the download from their website form HP

  tried to install all updates firmware of HP

  tried to install without Firewall (bullguard)

  installed the latest firmware on my Linksys wifi router

  But still no luck

  the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops

  It goes well until after I give my network key, and then it opens the network and communicates for a wile

  the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer

  and the hp software is not responding so I have to restart my computer...

  I have no idea of what I can try again

  Help!

  Thank you

  Niels

  If you have the original CD, it get a L3 uninstall program and run that.  It will remove completely from your software.

  Reinstall the software from hp.com.

• Glitch iMac at startup after the attempt to update

  I can't access the startup or logon after I tried an update. It crashed and now Flash on and off load screen. This is an imac 2011. Is it possible, he did his time?

  Probably not, however when major updates are made, it focuses on systems that use a HD. If you already have a HD summary the added stress can put it on the edge.

  Until you do, test. Reset the PRAM and see if that helps. Use iMac SMC and PRAM reset for instructions.

  If this does not work, then try to reboot in recovery (command-R) score and see if it works.

• After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar.

  After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar. This seems to happen randomly according to the current URL. When the problem exists, I can't read anything in the URL bar. I have a screenshot of the problem.

  This problem may be caused by the extension of 1.0.6 RSS icon which displays in the list of system details.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• atikmdag.sys BSOD appears on Satellite C850-19 q after 8.1 Win update

  Help, please.

  I have Satellite C850-19 q (PSCBYE-00L00GY4), Windows 8 x 64, after that I have updated to 8.1 on store, show me BSOD (atikmdag.sys system_thread_exception_not_handled).

  I tried to reinstall windows and install again all drivers and updates, nothing has changed.

  Do you have any suggestions?
  Thanks in advance.

  Sorry for my mistakes in English

  Hello

  Have you updated your operating system instructions offered on http://www.toshiba.eu/innovation/generic/windows8_1-message/?