No power no boot... (BIOS problem?) ... Pls HELP

Similar Questions

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• serious problem. pls help!

  some "khar khar sound is coming from at the bottom of the keyboard from my hp g6 pavillion 2231 all the time when the Lalonde is running.» What to do. I'm tired of this noise. pls help!

  Hello

  Sorry khar khar?   Mainly under the keyboard sounds would be Fan or HARD drive that could mean either the fan (if fan) is struggling to move due to dust build up OR the hard drive is a failure, it is difficult to give you a firm answer without more information. Can you tell the difference between the noise of the fan and hard drive noise? When you start up from cold noise not start immediately or is he only heard talk after Let's say 5-10 minutes?           Checkurtech

• Hewlett-Packard 786d 1: bios upd (pls help)

  

  That's what I have, I found where to download the bios upd but the problem is that it is not available for wind 7 home. so can you help pls.   http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ir_73174_2 & swEnvOid = 1093 # -this is where I found the upd for bios

  GogoMesar

  Sorry, nobody responded sooner, but what you want simply isn't available.

  The last time that HP has released a BIOS for your COMPAQ PC was 2007 and there is nothing more recent for Win7.

• the G7 1113eo lights. Power led flashes 3 times pls help

  Hello, im hoping someone can help me, I have a 1113eo of the g7. that does not start. the battery has been dead for a while, but his works well with just the adapter. But yesterday it no longer starts, I tried to do the hard reset (remove battery and hold the power button for 15/30secs) but who did not work, so I started to disassemble that he virtually stopped when I discovered that I didn't have a screwdriver. then press the button power again just to check, and the pc started. a stroke of luck was good cause I tried to restart and it started again.

  whenever I press the power button, the little led next to the power supply, flashes 3 times. No its or other led´s flashing

  Please help me

  (ps the warranty is no longer valid)

  Hello

  It is certainly not good if you are able to check the adapter - my main concern, as you was able to get the laptop to start only once, is that this may also indicate a possible problem with the power supply Board.

  Kind regards

  DP - K

• You tube problem pls help

  Updated 3.6.15 and all of a sudden You Tube stop working. Its still there but no video shows. Only a black screen.

  Other browser works and sites like Metacafe and videos integrated in other places. Adobe Flash is updated to the last 10.2.152.32.

  Can anyone help?

  Clear the cache and cookies from sites that cause problems.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".

  You can also try to delete cookies Flash (LSO) and settings.
  
  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  See also Flash Local storage settings:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help02.html

• Compaq Mini 110 Bios Password {PLS HELP}

  My notebook to ask a password please help

  Error code: CNU93032ND

  Hello

  In this case, check the following points.

  1. the stop code you posted (generated after 3 erroneous seizures) is correct.

  2. you have entered the code correctly - e9lof1f79t

  3. your laptop has a QWERTY keyboard

  4. try to enter the code using an external QWERTY keyboard

  DP - K

• SwishMax2 SWF in Captivate: _droptarget problems - PLS HELP

  I have a drag & drop SwishMax2 app that works well in Flash Player. He checks where you drop a clip (using this ._droptarget) and something inspiring where you drop.
  
  Running the version standalone SWF gives me the correct "dropzone" in slash notation: / truthsZone/truthsZone or/liesZone/liesZone.
  
  When I import the SWF file in Captivate 3, drop the clip and debug the value of sound "this ._droptarget", it always returns "/ contentShade_mc" as the string value, no matter where I drop.
  
  Does anyone have an idea why this is happening? Captivate is somehow interfere with the _droptarget value? Has anyone out there swf imported with drag & drop code in Captivate 3 and had similar problems?
  
  Thank you! Fred

  Solved the problem.

  Dome digging and it seems that _droptarget always returns all what it hits, from the main time (more high depth) - which is the clip of Captivate in this case. Used the method hitTest() instead, and it works fine now.

  THX - Fred

• BIOS problem, how downgrade

  I'm updating the bios to 2.14 to 2.21 on my aspire E1 - 571. MY video ram on version 2.14 was 128 MB and is now on 2.21 64 MB. How downgrade bios 2.14 because 64 MB is bad for the game, when I go to install 2.14 has error message "Comparison of bios problem" Please help, help, help

  Erkedo,

  Avoid any problems flashing the BIOS to an older version. Did you do that there is no way to manually change the video memory setting in the BIOS?

• Re install BIOS Pls Help

  Hello

  My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below...

  
  

  

  

  

  So I press start to update the BIOS. at that time there than in the red question marked area (?:?) got the massege "do not shut down the PC when the update is complete" like that.

  
  

  during the update my PC has low power. Then it's the exit ramp.

  
  

  Now the problem is when I turnon my the computer power light but no display no sound, nothing comes on the screen. I think that the BIOS has been deleted or corruption. pls help me to do something about it. It is very useful for me

  
  

  Thank you everyone

  Looks like this power loss that happened after that BIOS reflash had progressed too far to recover, you may need to have HP reflash the BIOS eprom in their establishment. Call HP and ask them how to get it. Since it is still under warranty, you will not have to pay for the fix.

• problem with my cd/dvd drive... pls help!

  I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hi I find a problem with my iPad... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hi I find a problem with my iPad 2 Air... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold both down until you see the Apple logo.

  What is your ipad 16g / 32g or higher?

  See you soon

  Brian

• HP pavilion h8-1230: how to access the bios pls help

  How to access the bios and I got windows 7 but to give birth to windos 10 with the thing free upgrade I got Pls Help

  Immediately after pressing the power button to turn on to start by pressing the F10 key.

• Problem with my iPhone 6s, while charging or using internet, he rejects a higher amount of heat! Pls help me...

  PProblem with my iPhone 6s, while charging or using internet, it rejects higher amoun of heat! Pls help me...

  Certain amount of heat is normal using a particularly intense use as a streaming video

  Can I restart a Force

  Restart your iPhone, iPad or iPod touch - Apple Support

  If the problem persists

  An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• I have install windows 8.1 and to use as a dual boot Linux, but linux not shown in boot pls help me

  Hi Acer, I use Acer V3 - 571G i5. I have install windows 8.1 64 and Linux 64-bit for use in dual boot, but linux not shown in boot pls help me. When I boot it shows only windows 8.1. In my computer the drive not present but is disc from the drive partion what linux installed shows as logical.

  Someone on the net says 'change the UEFI boot legacy '.

  but I can't have this option in my Woods, please help me where is and how to change...?

  You can't update 1.x to 2.x and you do not need.

  you just erase you the Ubuntu grub after windows 10 installation, follow the first link on the post of JordanB.

• Error "uh oh, the stage of rendering impossible.". Some features may be disabled. "pls help to solve this problem. Can't function without it

  Cannot use the extract error is: "uh oh, step of rendering impossible.". Some features may be disabled. "pls help to solve this problem. Can't function without it

  The forum of the extract is HERE.

  From the looks of things on this forum, you are not the only one having this problem now. Maybe someone will have an answer.

  -OB