No power on my Satellite P300-1AP

Similar Questions

• I need a power adapter for Satellite P300

  I'm of the Canada first of all, I know this is a forum of Europe...

  OK, so my question is my AC stopped working and it is not covered by the warranty.
  So, I was hoping you guys could put me in the right direction to have a cheap adapter, if off ebay or something...

  I noticed that a lot of cards on ebay for toshiba doesn't list my computer for compatiability... I'm out of luck here or?

  Thanks for the help

  Hello

  Why you n t throw an eye at the bottom of the power adapter that came with your laptop.
  There should be a label with all the necessary information.
  There should be a model/part number and you might find some details on the values of Watt, volts and amperes.

  The value of the Volt is important. You must use the AC adapter that supports exactly the same value! The ampere would be a little higher, but if you would with google for the part number you will find on the label, then you could buy exactly the same piece!

  See you soon

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Satellite P300 - on power turns on, but nothing happens on the screen

  Hello

  I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off nothing extraordinary happens.
  Although later, when I went to turn on I pressed the power button, but the screen was not working, I tried to connect an external display but nothing showed on this subject, although the power of lights was turned on, the drive CD opened and closed as normally don't and I could hear the fans work.

  That I realize windows 7 welcome sounds were not playing even after a few minutes with the laptop turned on and the laser mouse was working only for a few seconds before it shuts down.
  It was when I started to believe that this was not a screen problem, but something else.

  I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Today the same problem has occurred, and I tried to set the same way as I did yesterday, hold the power button for 60 seconds, but this time it did not work. I retried it for 3 to 5 times and nothing.
  After a few hours, leaving the computer is off, resting, I retried the process and now it worked.
  Now I'm afraid to turn off the laptop, because I need a lot of time and patience range to activate.

  What could be the problem and how do I solve it?
  Can you help me?

  cumpliments,
  Adriano

  > I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Yes, this workaround is sometimes useful to bring back the unity of life.

  > What could be the problem and how do I solve it?
  It's hard to say what causes this. Satellite P300 is an older model mobile phone, so it is possible that among the pieces of equipment begins to malfunction.
  It would be interesting to know if the use of the various modules of RAM would change the functionality of the laptop. If you have compatible RAM modules spare you can test it.

  In the worst case, it could be possible that beginning of motherboard laptop malfunction.
  It would be the worst case I hope for you that it s not mobo related issue.

  PS: Check if your BIOS is up to date. In case this is not the latest version, try to update the BIOS.

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Satellite P300 - 1 c 9 - How long works the battery?

  Hello

  I was wondering if someone could let me know how long I should wait for the power of the battery on my satellite p300 - 1 c 9 to last?

  The laptop is now 11 months, again it only lasted a meager 1 hour, now its down to 44 mins which seems to be very short.

  It doesn't seem to be the point of a lot having a laptop that must be connected whenever you use!
  I talked to toshiba tech when he was nine and was advised to unload a few time completely to form it and he said he would get me another 10% (wow, a whole 6 minutes), which made no difference.

  look forward to hearing any suggestions.

  Angela

  Hello

  Sooner or later each battery will die and lose the own performance that s nothing unusual

  You should know that the battery working time depends on the use of the laptop.
  The battery much faster running high-performance applications that need many remedies of material.
  All parts of equipment must be able to! CPU, GPU cooling modules, display, etc.

  Reduce the brightness of the screen and set the CPU or GPU to lower performance in order to save the battery.
  You can do this in Win7/Vista power management!

  Here's a useful HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• Satellite P300 does not load

  Hello.

  I have Toshiba Satellite P300. It's almost 4 years.
  However, 3 months ago it started not not to charge the battery. I removed the battery and the computer left only with the adapter.
  Now it does not charge to one, I have to wait until electricity or sth will reach a level to start the computer.

  So, please help, if anyone has had similar problems or know the reason why and what to do.
  Maybe its adapter problem, or something wrong with the connection between the adapter and the pc. I don't know and have no money yet to check it out.

  Someone knows what's the problem? Thank you.

  Hello

  These issues can be related to different reasons;
  -AC adapter problem
  -Question-motherboard (I especially m thinking to provide electronic problem)

  But I don't think it could be malfunction AC adapter because the laptop can lights after either a specific power level reached or laptop can start after a longer time being connected to the power adapter. Is this good?

  Well, looks like a mobo problem but it's just a suggestion
  The parts must be checked first, before replacing

• Re: Problem loading Win7 installation on Satellite A210-1AP

  Hy.

  I have laptop Satellite A210-1AP that came with vista 32. Now, I want to do a clean install with win7 x 64, but it does not start the installation program.
  Same problem happened when I tried to install fedora. With the cd supplied with the product power works well.

  Are you using the original installation of Microsoft Win7 64 bit disc?
  What happening exactly when you start a startup from the CD/DVD drive?

• Two questions with Satellite A210-1ap

  Hi, I'm from Turkey.

  My English isn't good. I think I can explain my problem.

  I have Windows XP Home edition system. I have implemented all the drivers of Windows XP Home edition for my laptop.

  But I can t set up Power Saver' and ' Modules common "(et touche d'accès rapide)."»

  Standby power error is * A Fatal error has occurred. This program will be terminated.*
  * code: 0x6A6 *.
  * Location: TPSDel.cpp (332) *.

  And my laptop is too hot.

  What can I do?

  Hello

  Satellite A210-1AP belongs to the PSAELE series.
  I checked the page of the Toshiba driver and surprise, surprise

  Toshiba Power saver and the common modules are NOT available for Win XP!

  So the answer is simple; the error message appears because you did NOT use compatible software, programs!

  Don t install the Toshiba Power saver and the common module if they are not designed for you notebook series!

  Concerning

• Satellite A210-1AP is getting really hot

  Hello

  I'm sorry if this is solved somewhere on this forum, but I didn t find...
  I have an overheating problem, my laptop never stops but it s not so hot I can almost burn my hand on him... it's hot so I m play any game in about 10 min.

  I changed to windows Vista, Windows XP Home edition and now Win 7 on each of them same problem occurs... Laptop is cleaned inside 10 days ago and I didn't touch processor--the drivers are on the Toshiba site. Laptop is Satellite A210-1AP (PSAELE).

  I think that my graphics card is overheating but I don't know m... If I put my laptop on the desktop and start any game in 10 minutes it gets very hot and keeps the temperature rise, while the game begins to lag (photo will slow down moments or just freeze for a while) then I take it on my lap and it works fine, once again his warm but can work.

  If any1 have any advice, I would be grateful.
  Thank you

  Hello

  1. choose, maximum performance, in the cooling method in power management.
  2 maybe, thermal grease needs to be replaced.
  3. What games do you play? Maybe, they are heavy for your computer. What was it before?

• Re: Satellite P300-150 - battery replacement not detected

  Hello

  I bought a replacement battery for my laptop that I got an error message saying that I should replace my battery.

  I bought a compatible battery, but it is not detected by my system.

  The battery indicator was strong when I plugged in for the first time in the power adapter, as it was when my old battery charge - but now it blinks in and out.

  I can't boot from the battery alone.

  Battery: PA3536U-1BRS, 4000mAh

  New: PA3536U-1BRS, 7800mAh

  Running windows 7.

  Any help would be greatly appreciated!

  Tom

  Post edited by: tomangegi - got a bit mixed model number

  Is the new battery compatible and listed as replacement for your Satellite P300?

  Somehow I think that it is not compatible and original Toshiba battery. I'm wrong about this?

• My Satellite P300 does not illuminate

  My Satellite P300 (PSPC4A - 03Q 018) switched on me unexpectedly while I was playing a game. I noticed he was running a little hot (it was on a level with clear vents office). I checked the time CPU. with the software and it showed levels up to 80 c while just browse Internet and up to 100 C + all playing games.

  So I blew the vents with compressed air - no change.

  After a little research, I decided to renew the thermal grease. The pulling down of some of the fat has hardened as it seems like a useful exercise. After putting together I have nothing. The only life that I had was a quick flash of the LED AC (the symbol of the plug on the front of the palm rest) when I plugged in, but that's all.

  What I've tried so far: I stripped down and everything reinstalled at least three times. This includes the processor, even if I didn't remove it at the beginning when I replaced the thermal grease. I reinstalled all the cables. I tried it with just the battery, just the AC line and at the same time. I tried to remove the RAM chips and put one by one in different locations. I tried to remove the battery and the AC, holding down the power for 30 seconds button line and try again with just the battery, just the AC line and at the same time.

  I think I either ESD'ed the card or mother or other component/s but I hope it is something much much painful/cheaper. Any suggestions?

  Thank you

  Hello

  Sounds that something bad happened to your hardware for laptop
  Maybe the RAM modules are faulty or the motherboard.
  I think that no one here would be able to tell which part is malfunctioning.

  What to say; If you n t know what part is affected, so I recommend asking a technician for a short control, I mean it is the best step before buying parts including don t need to be replaced

  After the hardware parts have been checked, you can decide what you want to do. sell this laptop faulty or replace parts
  But the new motherboard is not cheap...

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite P300 - Noisy battery charger

  My battery charger make noise. It's like a hiss. Is this normal? Can it be replaced under warranty?
  If I unplug my laptop, it does not sound.

  My laptop is a Satellite P300.

  Each faulty hardware component can be exchanged under warranty. You can contact the nearest authorized service provider. They can check the power adapter. If the card is faulty, you will get a new free.