Similar Questions

• Variable of online presentation of dashboard

  Hi all
  
  I have a report on a dashboard page that navigates to another report on a page of different dashboard (on the same dashboard). The
  first page of dashboard has a prompt that must be passed as a filter to the sailed report i.e. Report1 on dashpage1 has fast Level1
  whose value should be passed to Report2 on dashpage2 which has Level2 (where Report2 must show values for the past Level1 Level2).
  (1) I tried prompt1 setting on the first page to the dashboard, but it did not help.
  (2) I'm trying to set a variable 'level1_val' presentation in the prompt1 and then in Report2 say Level2 = @{level1_val} in the responses (filter-> add variable presentation, I did not provide a default value). But when I browse Report2 shows no results. On the addition of the value of the filter, I noticed the condition of Report2 is Level1 = level1_val (taking level1_val presentation a string variable and corresponding to the Level1 guest value). Level1 prompt value is a string. Y at - he said a format "@{level1_val}' I should use in the column filter (I tried this too)?"
  
  Thank you
  Ananth

  '<--a href="">
  Action=navigate&col1=%22Level%20Hierarchy%22.Level1&val1='|| REPLACE (REPLACE (' @{pv_level1} ',' ', '+'), '+', '% 2B') | ' > Link<-->'

  For presentation attribute replaces "with 22% and spaces with % 20, it is necessary for the syntax of the URL of the dashboard for attributes prompt report or dashboard target."

  col1=%22Level%20Hierarchy%22.Level1

  where "Hierarchy of levels".level1 is the true name of presentation table.column in report 2, the value is invited.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Request Express 5.0.0.00.31/Tabular form/number of lines

  Hello

  I would like to ask how to configure the number of lines displayed per page.

  I did the below and also I tried to re-charge/reload, but impossible to get what I want.

  Implement a tabular form

  Set the presentation attributes of the State and the paging number of rows 50

  Registered and run this page, it shows still 15 ranks in this page.

  A I missed something? Or as a table don't allow no more than 15 lines be shown on 1 page?

  Thank you.

  Hello

  Pagination settings are cached for the duration of the session. This change is visible immediately, close the session, restart the brower and connect again or manually re - request the page from the browser's address bar, adding the ClearCache position 'RP' in the URL.

  Do not set anything in number of lines (point). This is used to identify an element of the page containing the number of lines to allow users to control this

  (Note: If you think it answers your question, please mark it as correct answer.) This will help other users in the community)

  Thank you

  Benhamdia

• Adobe Illustrator 19.1.0 vs 19.0.1 SVG Export Plug In

  In the last update for Adobe Illustrator CC, it seems that the SVG Export has changed. Styles for a path used must be defined by the attributes on the < path / > in SVG. However, now, it seems that there is an attached style sheet and classes added to describe how a path is displayed. for example:

  < filling polyline = 'none' STROKE = "#FFF6DF" - the line width = '3' stroke-linejoin = points "rounds" = "0.56 0,112 112 112 112.0 74.6,0" / > ""

  VS

  < style type = "text/css" >

  .ST0 {fill: none; race: #F1EDE1; stroke-width: 2.9869;} AVC - linejoin:round ;}

  < / style >

  < polyline class = "st0" points = "-399,245-455,245-455,287-399,287-399,315-455,315-455,357-399,357" / > ""

  Is there a way when exporting to force the definition of attribute instead of CSS?

  The default options for the representation of styles in SVG is changed. If you want the styles to be defined as attributes, you should choose 'properties CSS"to"presentation attributes. This option is available if you choose 'Other Options' in the lower left corner of the dialog box Options to Export SVG.

  -Rama

  Illustrator team

• Error importing ResourceObject xml file in Deployment Manager

  Hello world
  
  I get this error by making import of HRPeopleSoftResourceObjects.xml (A resource object xml file) in the Deployment Manager. I do this step of reconciliation Authoritative (Trusted Source).
  
  Error that says:- not present attribute in EntityDefination to user: ExpectedReturnDate.
  
  ExpectedReturnDate is a field of the UDF (Customize). I did the import of metadata and sandbox for this field create this attribute to IOM. I see this attribute on the user details screen as well as in the User Table by IOM. Ideally this error should be, no popup. I do this import of reconciliation.
  
  I pulled and checked all xml as (UserEO.xml.xml, userEO.xml.xml, userVO.xml, UserVO.xml.xml) of oracle.iam.console.identity.self-service.ear_V2.0_metadata1 files and found ExpectedReturnDate field is available.
  
  I use: IOM Version - Oracle 11g Release 2
  Version of database - 11.2.0
  WebLogic version - 10.3
  
  Please let me know how to fix this error.
  
  Appreciate your response and your support!
  
  Best regards
  Vijay Kumar

  The console design, open your resource object. Recon tab and click on the button create a profile reconciliation.

  -Kevin

• Question of layout with panelStretchLayout and panelGroupLayout

  I have a problem with a model of complex page layout. Basically a component does not stretch vertically.
  Here's a simple sample page that reproduces the kind of my problem.
  
  Page when displayed, extends the panelSplitter on the entire page.
  However, if I have not commented to the panelGroupLayout it does not (no matter the value of the presentation attribute).
  I have a panelGroupLayout after the Center facet which spans the panelSplitter of the entire page?
  
  < af:panelStretchLayout id = "pt_psl1" >
  < f: facet name = "center" >
  <!-af:panelGroupLayout id = "pt_pgl2" layout = "scroll" styleClass = "AFStretchWidth"->
  
  < af:panelSplitter orientation = "horizontal" splitterPosition = "100".
  positionedFromEnd = "true" id = "ps1ee" >
  < f: facet = 'first' name >
  < af:commandButton text = "commandButton 1 ' id = 'cb1eee' / >
  <!-id = "af_twocol_right_sidebar_split_stretched"->
  < / f: facet >
  < f: facet 'second' = name >
  < af:commandButton text = "commandButton 2 ' id = 'cb2eee' / >
  < / f: facet >
  < / af:panelSplitter >
  
  <!-/ af:panelGroupLayout->
  < / f: facet >
  
  < / af:panelStretchLayout >
  
  Thank you

  Panel group extend to his children.
  See part of the geometry in the doc:
  http://jdevadf.Oracle.com/ADF-richclient-demo/docs/tagdoc/af_panelGroupLayout.html
  To stretch the group separator, you don't need any panelGroupLayout.

  You should probably use another layout component, depending on what you're trying to reach.

• Value EL debugging

  Hi people.
  
  am on jdev 11.1.1.5.0 - adfbc
  
  the last, I realized that the way to debug Groovy values.
  
  now here. I want to trace the EL value in my jsff. page and the other of the present attribute in pagedef.
  
  am able to debug only java files in other words, can I learn the value of what is going on in the java file (something like the scope value and values of line).
  
  Maybe I missed some parts how to debug pagedef attribute values.

  Hello

  Maybe you should see view-> debugger-> el sins during application debugging.

  Kind regards

• Remove users from UDF attribute of unique values present in the flat file

  Hello
  I'm trying to remove users from the IOM by using a single value of one of the present of the UDF in the flat file for example say SSN. I preferred the approach to go through a scheduled task to remove users from IOM. I know that the permanent deletion of IOM through the database is not possible. To have written a custom code to do the same thing and I have used the tcuseroperationintf.deleteuser(long...) method. But I had a straight and simple query for the same thing. Should what value I contact in the long appropriate field in the list of the attributes of this method?
  
  Any guidance on this task would be appreciate.
  
  Thanks in advance,
  -oidm.

  You want to the Users.Key or the USR_KEY and give it in the format of variable length.

  -Kevin

• How to access each present line attribute in a view using Expression Groovy accessor.

  Hi Experts ADF,

  JDEV version 12.1.3.0

  I have a use case where I have a table based on the ZZVO1() View object. In a table, one of the column there is calculated one and only X column based on the database column.

  I have a view accessor (XYZVO1 ).

  How can I subtract ViewAccessor(first row) - X (first line) column and display it in the column attribute Y.

  Column of Y = XYZVO1("Gross")-ZZVO1("X") - 1st rank

  Column of Y = xyzvo1("gross")-zzvo1("x")---deuxieme row

  -----------                                                             ---------------nth row
  

  here XYZVO1 is the view

  and ZZVO1 is the orginal VO containing X and Y.

  Please suggest some of your views.

  Thank you

  Roy

  You can follow this blog Andrejus Baranovskis Blog: Groovy with a view link accessor which shows how to use groovy to access an attribute through a link in the view.

  The test, you can read this paper https://www.google.de/url?sa=t&source=web&rct=j&url=http :// www.oracle.com/technetwork/developer-tools/jdev/introduction-to-groovy-128837.pdf&ved=0CCYQFjAAahUKEwiN39b9l-XHAhUIbxQKHXjbDtY&usg=AFQjCNHcHoRZjvA2NS6tOmF-MNTtvqyrDA&sig2=IB4rI5HgpgdfKW7pLyvq9w

  Timo

• Web game see the presentation in order to hide the predefined attributes

  Hi, I'm creating a workflow that automates the creation of vDC. The goal is to give our customer vCloud the possibility of deploying vDC themselves. A problem I have is that the workflow of creating default vDC give user option to select the provider TDC. We want to set this attribute and hide the customer. But the only option I can find is to hide the parameter when an another Boolean input attribute has been set to 'True' or 'False '.

  There must be another way to hide these predefined attributes. Can anyone help?

  Thank you

  Do not have another attribute of input, you can simply define "true" (without the quotes) in the value field for the hide option

  In addition, you can move the entry as an attribute and predefine your provider vDC here.

• Attribute EasyTab

  Is there a way to gray on the tab?

  If I use ATTR_EASY_TAB_VISIBLE tab may not appear at all.

  I'm looking to make gray so that when the tab is selected controls are visible, but in gray mode.

  Thank you.

  ATTR_EASY_TAB_DIMMED is present in the instrument at least CVI7.1 on (I can't test on older versions). The problem is that there is a difference in behavior between the control EasyTab and native tab control: a gray tab cannot be included in the first while it displays in the native control, even if all the controls can be carried out.

  After some testing, I found that you can call SetPanelAttribute on a given with the ATTR_DIMMED attribute after the EasyTab tabs page is created: the behavior is similar to the native control (inside diameter of the tab page can be selected and illustrated with orders dimmed).

  As a last suggestion to lvrat, since it seems to work on a version of the CVI, I recommend you spend the EasyTab to a native tab control: from the point of the user, there is no real difference between them. Side programmer, instead of LoadPanel (the Panel with canvas) + LoadPanel (signs of the tab) + EasyTab_ConvertFromCanvas + EasyTab_AddPanels (or LoadPanel + EasyTab_ConvertFromCanvas + EasyTab_LoadPanels) simply load the Panel and a set of GetPanelHandleFromTabPage if he needs to save the handles.

• VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  I try to open a com port Seraglio in LabVIEW get this error:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  It occurs in ISA set up a Serial Port (Instr) .vi and seems to be related to the speed of transmission. If I use anything else than 9600, I get this warning. I need to use 115200. I can open successfully to other com ports at 115200.

  I am able to talk to this device using other Terminal programs to 115200 without problem. It is only through LabVIEW and NI MAX.

  The Unit presents itself as "Stellaris Virtual Serial Port (COM12)" in deveice Manager.

  Is there a way to get around this?

  Thanks in advance!

  
  

• list of ID missing attributes multi-function

  
  

  Hello

  I have not seen this problem before.  What version of LabWindows/CVI do you use?  What version of the NO-Scope driver you have installed?  In the same directory as the niScope.fp file is located, it is also a file named niScope.sub.  This file must be present in order to fill the attributes - is this file present in the directory?  Correct this problem may require a reinstall of the pilot and the support of the CVI if there is in fact a corruption of one of the files.

  Kind regards
  Andrew W
  National Instruments

• the variant attribute value - how fast it is?

  Hello

  There were days OR presentation on attributes of type variant. There are example saying that variant can be used to remove duplicates from table 1 d and this supposed to be a very quick solution. I did some tests and it seems that is not:

  

  On the other hand the variant is very fast research once all atrubutes are implemented.

  

  My question is how fast is being variant attributes and how this structure variant is allocated and stored in memory.

  Excerpts from VI attached.

  LabVIEW manages memory for you.

  However, if you make too much reallocation of arrays of surfaces, you might run out of contiguous memory and thus running out of memory, memory fragmentation can cause problems.

• Required attribute tab

  Hi all

  Is there any attribute of the tab present in CVI using that disables or low, all present controls in this tab?

  Can ATTR_DIMMED disables all present controls in this tab?

  Kind regards

  mhs100

  Ah... you can access any tab panel, you must use

  GetPanelHandleFromTabPage (panel_handle, PANEL_TAB, 1, & tabpanel_2_handle);

  for each tab panel. This will give you the tabpanel_2_handle of handful of Panel for the tab of the Panel PANEL_TAB that you can use to set the attributes of this Panel using SetPanelAttribute (tabpanel_2_handle, ATTR_DIMMED, 1);

  GetPanelHandleFromTabPage

  int GetPanelHandleFromTabPage (int panelHandle, int controlID, int index, int * tabPanelHandle);

  Goal

  Retrieves the handle of the Panel to a tab page in a tab control.

  The handle of the control panel to specify the panel associated with the page tabs in the following function calls.