Value EL debugging

Hi people.

am on jdev 11.1.1.5.0 - adfbc

the last, I realized that the way to debug Groovy values.

now here. I want to trace the EL value in my jsff. page and the other of the present attribute in pagedef.

am able to debug only java files in other words, can I learn the value of what is going on in the java file (something like the scope value and values of line).

Maybe I missed some parts how to debug pagedef attribute values.

Hello

Maybe you should see view-> debugger-> el sins during application debugging.

Kind regards

Tags: Java

Similar Questions

"No run" values while debugging

Hello

When debugging, I met a problem: some nets do not display their values.

The conditional breakepoint is set to '1' (blue circle)

Actual execution module - comparator (red circle).

Given that you can claim, probes '3' and '4' don'st displays net values, whereas '6' is (being placed after '3' and '4').

Where is a problem.

Thanks in advance.

Pavel

But the order of execution means that the values 3 and 4 should take place before the value displayed in the 6a probe was calculated.

Now, if this is a case where the breakpoint that happened and then probes have been placed on the wire, or you place the probes with to put on performance, then it is possible for 3 and 4 to not show a value. If the sons 3 and 4 already executed by the time their probes have been placed and wire 6 was not before the probe was placed, then you might have a value of 6 and not 3 and 4 probe.

Probes display only values that took place when the cable is running after the introduction of the probe. It does not appear all that occurred before the probe was dropped.

It is not evident from the attached photos or the message as to what the executing state the code is in.

Manually updated values for debugging

In various other code debuggers (MS Visual Studio, GNU Debugger (gdb), etc.) while a program execution is paused, I can manually change the values of variables within the program.

Is this possible in LabVIEW 8.2?

Lol vote for the idea.

Printing of VO motion with a dynamic value to console (Journal)

Hello
Kindly guide as how to print the query of the VO with the run to the console settings.
I used vo.getQuery (). But in Diagnostic messages, bind values are coming up as "variable1 =: 1". Instead, I want to display the value of linking the exact duration as "variable1 = value" for debugging purpose.
Please suggest.
Kind regards
Zahid

Hello

Write '-Djbo.debugoutput = console "in run options.

This example displays all the queries in the console. You will always see: 1 bind variables, but you can also see the values of bind under queries.

Kind regards

Anil

The OID connector and failed multiple values of attribute update task
Hello - I am stable update on an attribute multivalue custom and have a few problems. Adding and removing tasks are fired very well and do their job, but when I try the update task for my attribute to multiple values, it fails with the following error. Guys please can you me what Miss me?

INFO, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class adapter: com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDUPDATEMULTIVALUEATTR
IBUTE loaded from the database.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcADPClassLoader/loadAdapter to the left.
INFO, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], adapter: multiple value of OID attribute update was launched for the task: my Application role
s update.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter to the left.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter entered.
INFO, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], from execution for adpOIDUPDATEMULTIVALUEATTRIBUTE adapter.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: isEvtName - value: adpOIDUPDATEMULTIVALUEAT
TRIBUTE
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: Type of card - value: T
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/isAdapterUnMapped entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/isAdapterUnMapped to the left.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: Tos Key - Value: 8
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: process Table - value: UD_OID_USR
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: Table Object - value:
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: Mil key - value: 110
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter - data: this card is being run-value: com.tho
rtech.xl.dataobj.tcScheduleItem
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/initAdapter to the left.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/setAdpRetVal entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/getRetValString entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/getRetValString - data: class - value: java.lang.String
* DEBUG, 29 March 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/getRetValString - data: poRetVal.toString () - Value: UPDATE_VAL *.
UE_NOT_SUPPORTED
* DEBUG, 29 March 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/getRetValString - data: return: sRetVal - Value: UPDATE_VALUE *.
NOT SUPPORT *.
* DEBUG, 29 March 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/getRetValString left.*
* DEBUG, 29 March 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/setAdpRetVal - data: return value from the UPDATE_VAL updated adapter *.
UE_NOT_SUPPORTED - value:
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/setAdpRetVal to the left.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/finalizeProcessAdapter entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/finalizeProcessAdapter - data: truncation UD_MY_ROLES_MY_APP_RO
THE 512-character - value:
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/finalizeProcessAdapter - data: mapped to the response Code - value:

DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem entered.
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem - data: event - value: adpOIDUPDATEMULTIVALUEATTR
IBUTE
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem - data: new status - value:
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem - data: SchData - value: UPDATE_VALUE_NOT_SUPPORT
ED
DEBUG, March 29, 2010 11:26:41, 165, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem - data: reason - value:
DEBUG, March 29, 2010 11:26:41, 228, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/updateSchItem to the left.
DEBUG, March 29, 2010 11:26:41, 228, [XELLERATE. ADAPTERS], class/method: tcAdpEvent/finalizeProcessAdapter to the left.
INFO, March 29, 2010 11:26:41, 228, [XELLERATE. ADAPTERS], adapter: adpOIDUPDATEMULTIVALUEATTRIBUTE completed for the task: MY Application role
s update.
If you choose the wrong, you delete and add, not up to date. It's not as if you update a value in the user profile as an value multi email address. You try to update an existing role or group in the target. Behind the scenes, members of the user groups and rules, they are not a member of the user, it appears like that.

-Kevin

Debug mode turns off after clicking on the button
Hello

I am using the Debug Mode in order to track down a problem, but when I click on an application button on a page in debug mode is disabled so I don't get the debug output that I'm after.

In short, I do the following:

(1) changing the page in the Application Builder
(2) by clicking on the button "Run" to run the page
(3) by clicking on the "Debug" button to activate the Debug Mode. The page is redisplayed with the release of debugging among the elements of the page then.
(4) I then type some text in some fields in a form region and click on a button in the same region to create a record. The same page then reappears, but the Debug Mode is now disabled.

Then I tried something similar using the schema of example COMMAND under the user name and a different workspace, and this time in debug mode is stayed on until what I turned off it explicitly.

Is there something I need to do to keep active Debug Mode?

Kind regards.

John.
John,

The branch set on the page determines if the current value of & DEBUG. is used in the URL redirected to. In principle, which would not be resolved. You would have to edit the branch (and make a f? p URL with & DEBUG or debug position YES.)

Scott

4.7 HP Device Manager: HPDM finding Thin Clients

I'm trying to implement HP Device Manager 4.7 on a newly configured Windows 2012 R2 server.

I am replacing a Server 2008 R2, where HP Device Manager works perfectly on our network. In fact, if I uninstall HPDM on the new server and reinstall it on Server 2008 R2 I can always access all thin clients.

The only difference I see in the facilities which is for some reason any gateway in HPDM is not a subnet mask. Research of the device are not lacking, they don't sell anything or simply continue indefinitely until I have Cancel.

Any help would be great. Thanks in advance.

Just to confirm: you did turn with HPDM 4.7 on Server 2008 R2 successfully, but not the right to 2012 R2 server?

Is your Windows 2012 R2 server with more than 1 NIC card? Could you please assign a specific NIC loca in the Gateway Configuration window and see if that fixes the problem?

Otherwise the logging level value please DEBUG and post the gateway.log when start HPDM Gateway

Error in BPEL 2.0 ORABPEL-05215

Hi all
I'm developing a simple BPEL process with JDev 12.1.3.0.0 and when compiling, I don't have any errors. When you deploy I ORABPEL-05215 error. The error description does not say much.
I search for other posts with this error and it is not a clear solution, it seems. I have checked the version of the suite soa and is the same that jdev (12.1.3) - I use Oracle pre-built VM for oracle soa suite 12 c (with oracle linux).
Details of the journal are:
[ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the ProcessSelect project: - > response code = 500, error: there was a deployment of the composite on AdminServer error: deployment failed: error occurred during deployment of the component: ProcessSelect to service engine: implementation.bpel, for composites: ProcessSelect: ORABPEL-05215
[ERROR]
[ERROR] Error loading process.
[ERROR] The field of process meets the following errors when loading the process "ProcessSelect" (composite "default/ProcessSelect!1.0-SNAPSHOT*soa_3053171e-2300-4d0c-845b-a4f47d3bb117"): Validation of BPEL2.0 process failed...
[ERROR] This error was an exception thrown by the underlying process charger module.
[ERROR] Check the trace for the exception in the log (the connection value level debug mode). If there is a patch installed on the server, verify that the ownership of the bpelcClasspath domain includes the classes of patch.
[ERROR].
[ERROR]-> [help 1]
[ERROR]
[ERROR] To see the full error stack trace, re - run Maven with the switch - e.
[ERROR] Re-run Maven using the X switch to enable logging of full debugging.
[ERROR]
[ERROR] For more information about errors and possible solutions, please read the following articles:
[ERROR] [help 1] http://cwiki.Apache.org/Confluence/display/Maven/MojoExecutionException
Process has finished with exit code 1.
Thanks for your help!
Concerning

Hello Krishna,

I tried to deploy it on JDev Integrated server, but the error continued. I inscreased the logging of finest oracle.adf.share.ADFContext have more details about the deployment he self.

AFTE searcing the deployment log, I found that the deployment was looking for the patterns on the MDS and could not find. I'm not using MDS directly, but I'm making reference to a diagram of another project within the same application. This is probably why the mds has been used for. I moved this scheme for the same project and the deployment worked without problems. I'm going to deploy on the other weblogic server to ensure that everything is ok.

Again, thank you very much for your help!

Kind regards

Antonio

Windows BSOD error 8
```
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80059cb028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000010019, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT

PROCESS_NAME:  chrome.exe

CURRENT_IRQL:  f

STACK_TEXT:
fffff880`0148b868 fffff802`31e3e965 : 00000000`00000124 00000000`00000000 fffffa80`059cb028 00000000`b2000000 : nt!KeBugCheckEx
fffff880`0148b870 fffff802`31fddeb3 : 00000000`00000001 fffffa80`042a7850 00000000`00000000 fffffa80`059cb028 : hal!HalBugCheckSystem+0xf9
fffff880`0148b8b0 fffff802`31e3e703 : 00000000`00000728 00000000`00000003 fffff880`0148ba10 fffffa80`042a7850 : nt!WheaReportHwError+0x253
fffff880`0148b910 fffff802`31e3e020 : 00000000`00000010 fffffa80`042a7850 fffff880`0148bac8 fffffa80`042a7850 : hal!HalpMcaReportError+0x53
fffff880`0148ba70 fffff802`31e3df1b : fffffa80`0435fd50 00000000`00000001 00000000`00000003 00000000`00000000 : hal!HalpMceHandlerCore+0xd4
fffff880`0148bac0 fffff802`31e3dd78 : 00000000`00000004 00000000`00000001 00000000`00000000 00000000`00000000 : hal!HalpMceHandler+0xe3
fffff880`0148bb00 fffff802`31e3ef0f : fffffa80`0435fd50 fffff880`0148bd30 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0xd4
fffff880`0148bb30 fffff802`31ed577b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0148bb60 fffff802`31ed552e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7b
fffff880`0148bca0 00000000`647109db : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x16e
00000000`0727ede0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x647109db

STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: GenuineIntel

IMAGE_NAME:  GenuineIntel

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB

Followup: MachineOwner
```
SR

This is called a BCC124 and is linked to the material. Since "genuine Intel" is referenced in your, I would run a cpu stress test.

Try this free stress test: http://www.mersenne.org/freesoft/

Prime95 Setup program;
-Extract the contents of the zip file into a directory of your choice
-Double-click on the executable file
-Select "all stress testing.
-Select the test of 'Blend '. If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
"Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
The selection of Test and the file stress.txt box describes the components that insists on the program.

Stop 0 x 124 is a hardware error

If you are overclocking try to reset your settings to standard processor and see if that helps.

If you keep getting the BSOD here are things more than you may want.
This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

Stop 0 x 124 - what it means and what to try
Synopsis:
A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

Generic troubleshooting ' Stop 0 x 124 ":

1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
(2) ensure that the machine is sufficiently cooled.
If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
It is best to run the latest drivers anyway.
(4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
Their website should provide detailed instructions on the brand and model-specific procedure.
(5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
6) trying (stress) test these hardware components that can be put to the test artificially.
The most obvious examples are the RAM and HDD (s).
For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
Who stops working mitigate the problem of the 0 x 124, jump to the next step.
If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
Smash back, obviously the latest addition of software may be somehow connected to the root cause.
If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
(8) clean and carefully remove the dust inside the machine.
Reinstall all memory modules and connectors.
Use a can of compressed air to clean the RAM DIMM supports as much as possible.
(9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

More advanced reading can be found here from a MS MVP IT PRO

http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

Cannot find the WSDL service defined for the name of the service

Hello! I made that call on the other composite via MDS on a single instance. Everything works fine. I've deployed this composite 2 to another instance, updated MDS. And I got error in the composite test 1st 2nd call. You have an idea? Thank you.

EM error

" < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < part name ="detail"> < could not find the service WSDL defined for the name of the retail service > {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1}. CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details > < / part > < a name = "summary" part > < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < Summary / > < / part > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >

SOA-server - diagnostoc.log

Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
ORABPEL-05002
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:238)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:89)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)
to com.collaxa.cube.engine.dispatch.Dispatcher$ ContextCapturingThreadFactory$ 2.run(Dispatcher.java:933)
at java.lang.Thread.run(Thread.java:738)
]]

Hello

In the em console, against you call composite (I meant first composite), could you click on the "Show XML definition" (right next to the ' Show WSDL and endpoint URI) and see if correct endpoint URI is set up for the 2nd composite?

ORABPEL-05215 in 12 c on the deployment

I get an error ORABPEL-05215 then deploy my composite to our 12 c development environment. The full message is the following:
There was a deployment of the composite on WLS_SOA1 error: deployment failed: error occurred during deployment of the component: PPLSFT_CRUD_Item_ABCS_prov to service engine: implementation.bpel, for composites: PPLSFT_CRUD_Item_ABCS_prov: ORABPEL-05215 error during the load process. The field of process meets the following errors when loading the process "PPLSFT_CRUD_Item_ABCS_prov" (composite "ItemServices/PPLSFT_CRUD_Item_ABCS_prov! ("1.0 * soa_4eeed66e-77cf-4aa8-a1bd-ca06e231b92e"): Validation of BPEL2.0 process failed... This error was an exception thrown by the underlying process charger module. Check the trace for the exception in the log (the connection value level debug mode). If there is a patch installed on the server, verify that the ownership of the bpelcClasspath domain includes the classes of patch.
I looked at the newspapers and it seems to say that my BPEL is not in phase with the doctors in the newspapers.
[2015 11-18 T 10: 01:36.161 - 06:00] [WLS_SOA1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [host: uxsoadev] [nwaddr: 138.230.209.241] [tid: [ASSETS].] [ExecuteThread: '13' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: TX12238] [ecid: da35a4bd-8daa-46af-9d69-10ba1e6dab4c-0000976f,0] [APP: soa-infra] [IDDM: 0000L4RL64SB1FELJ6U4Uf1MIulG00001l] BPEL / PPLSFT_CRUD_Item_ABCS_prov.bpel:135 segment of XPath error 'child::ns4:DataArea' cannot be resolved., suggested fix: check the associated BPEL variable type definition. [2015 11-18 T 10: 01:36.161 - 06:00] [WLS_SOA1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [host: uxsoadev] [nwaddr: 138.230.209.241] [tid: [ASSETS].] [ExecuteThread: '13' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: TX12238] [ecid: da35a4bd-8daa-46af-9d69-10ba1e6dab4c-0000976f,0] [APP: soa-infra] [IDDM: 0000L4RL64SB1FELJ6U4Uf1MIulG00001l] BPEL / PPLSFT_CRUD_Item_ABCS_prov.bpel:135 error Variable "outputVariable" isn't a part named "payload" - check segment of expression "$outputVariable.payload".
This composite relies on my machine, it seems fair that the MDS is not up-to-date. We tried to empty the cache memory of SDM and restart the server.
Post edited by: Tom Henricksen

Hi Tom,

"You say" importing ns1 in this file is:' and mention "xmlns:ns1 ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0"'. '. But it's not an import, but what a namespace declaration.

In the dosage of the bpel, wsdl references can be found in three places.
- "At the top, you will find something like: http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0" location = "WSDLs/PPLSFT_CRUD_Item_ABCS_prov.wsdl" importType = "wsdl" "/ > or http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0" location ="oramds://appl/..." SomeStructureWithinAIAMetaData.../PPLSFT_CRUD_Item_ABCS_prov.wsdl"importType ="wsdl"/ >
- The statement of service:
http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#WSDL.interface (PPLSFT_CRUD_Item_ABCS_prov).

"callbackInterface ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#wsdl.interface(PPLSFT_CRUD_Item_ABCS_provCallback) "/ >
- The Declaration of the component:
http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#WSDL.interface (PPLSFT_CRUD_Item_ABCS_prov).

"callbackInterface ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#wsdl.interface(PPLSFT_CRUD_Item_ABCS_provCallback) "/ >

I hacked these example/snippets based on your information so they are not exact matches. Now, you see above that I have an example in the first bullet that reference the wsdl file for a local wsdl under the project. But I guess in your case, they all refer to the file in the MDS, as my references in bold.

Files referenced it should be checked. Here in the wsdl file, you have statements of message in the form: name of wsdl: part = "payload" ... Ago this time is was expected to be a missmatch according to the compilation error message.

In the Panel resources, you can create a connection to your MDS IDE. In my case:

The 'SOA_DesignTimeRepository' is a filebased MDS that points to the location of our MDS structure in SVN WorkingCopy. The latter is Databased connection pointing to the MDS user in the database SOAINFRA:

Allows you to browse the MDS after the paths in your composite.xml to load and validate the document currently loaded in the mds wsdl. Compare them with those of SVN and or your local filebased MDS.

One used at compiletime in JDeveloper is referenced in the ADF - config.xml in your SOA-Application\.adf\META-INF\ file:

http://xmlns.Oracle.com/ADF/MDS/config">

http://xmlns.Oracle.com/MDS/config">

It can be also wrapper wsdl referenced in the composite.xml or in the BPEL file this import wsdl from the mds or the local soa/bpel of the project itself. Then follow these links. It could be that by importing JDeveloper wsdl copied into the project.

So here are the references that you should check carefully.

Hope this will bring you on the right track.

Kind regards
Martian

Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

Hello the Experts of Oracle.
I already have
1. installed the Apache HTTP Server (with libraries)
2. Downloaded the Plugin of Apache WLS12c
3. copied the plugin files into the appropriate directories.
4. Modify the httpd.conf (see below)
At the present time, I try to start the Apache HTTP server and runs in an unexpected error.
WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ? I've SPECIFIED the PORT 8888
Question: How to go beyond the error. -| "Address already in use: make_sock: could not bind to address 80 '
My server is 192.168.1.21. In my view, that it has ESTABLISHED processes. Yet, he reports, that it cannot start.
Here is the content of the httpd.conf file. My customizations are in Red.
#
# This is the main Apache HTTP server configuration file. It contains the
configuration directives # that give the server its instructions.
See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.
# See especially
# < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >
# for an analysis of each configuration directive.
#
# Do NOT simply read the instructions here without understanding
# what they do. They are there only as advice or reminders. If you do not know
# consult the online documentation. You have been warned.
#
# Configuration and logfile names: If the file names that you specify for a lot
number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
# server uses this explicit path. If filenames do * not * start
# with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".
# with ServerRoot set to "/ usr/local/apache2" will be interpreted by the
# Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".
# will be interpreted as "/ logs/access_log".
#
# ServerRoot: The top of the directory under which the server tree
# configuration, error and the log files are kept.
#
# Do not add a bar slash at the end of the directory path. If you point
# ServerRoot to non-local disk, remember to choose a local drive on the
# Directive Mutex, if based on mutex files are used. If you want to share the
# ServerRoot even for several demons httpd, you will need to change to
# PidFile less.
#
ServerRoot "/ usr/local/apache2.
#
# PidFile: The file in which the server should record its process
ID # when it starts.
#
PidFile ' / usr/local/apache2/logs/httpd.pid '.
#
# Mutex: Allows you to set the mutex mechanism and the mutex file directory
# for individual mutex, or change the default global values
#
# Uncomment and change the directory if mutexes are based on files and the default
# mutex file directory is not on a local disk or is not suitable for some
# other reason.
#
# Default Mutex: newspapers
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
ports #, instead of the default value. See also the < VirtualHost >
directive #.
#
# Change this to listen on specific IP addresses below for
# prevent Apache glomming on all related IP addresses.
#
# Example-> look 12.34.56.78:80
# Listen api.astcorporation.com:8001
Listen 8888
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the features of a module that was built as a DSO you
# duty place corresponding 'LoadModule' lines at this location until the
# directives that it contained are actually available _avant_, that they are used.
# Modules statically compiled (those listed by "httpd-l") is not necessary
# to be responsible here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule modules/mod_authn_core.so authn_core_module
LoadModule modules/mod_authz_host.so authz_host_module
LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
LoadModule modules/mod_authz_user.so authz_user_module
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule modules/mod_authz_core.so authz_core_module
LoadModule modules/mod_access_compat.so access_compat_module
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule modules/mod_reqtimeout.so reqtimeout_module
#LoadModule ext_filter_module modules/mod_ext_filter.so
Request_module modules/mod_request.so #LoadModule
#LoadModule include_module modules/mod_include.so
LoadModule modules/mod_filter.so filter_module
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
Modules/mod_deflate.so deflate_module #LoadModule
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule modules/mod_expires.so expires_module
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule modules/mod_version.so version_module
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule modules/mod_proxy.so proxy_module
Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
Modules/mod_proxy_http.so proxy_http_module #LoadModule
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule modules/mod_unixd.so unixd_module
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule modules/mod_negotiation.so negotiation_module
LoadModule modules/mod_dir.so dir_module
#LoadModule actions_module modules/mod_actions.so
Modules/mod_speling.so speling_module #LoadModule
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
# Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c
LoadModule modules/mod_wl_24.so weblogic_module
< IfModule unixd_module >
#
# If you want httpd to run as a different user or group, you must run
# httpd as root initially and it will pass.
#
# Group / user: the name (or #number) of the user/group to run httpd as.
# It is generally advisable to create a dedicated and aggregatable for user
# httpd, as with most system services are running.
#
Demon of the user
Daemon group
< / IfModule >
Server configuration # 'hand '.
#
# The directives in this section implement the values used by the 'hand '.
# Server, which meets all demands that are not managed by a
definition of # < VirtualHost >. These values also provide defaults for
# all < VirtualHost > containers you can set later in the file.
#
# All these directives may appear inside containers < VirtualHost >,.
# in which case the value default parameters will be substituted for the
virtual host of # being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mail. This address appears on some generated by the page server, such
# as error documents. for example [email protected]
#
ServerAdmin [email protected]
#
# ServerName gives the name and the port used by the server to identify itself.
# This can often be determined automatically, but we recommend that you specify
# explicitly to avoid problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
Servername 192.168.1.21
#
# Deny access to the whole of the file system of your server. You must
# explicitly allow access to web content directories in other
blocks of # < directory > below.
#
< directory / >
AllowOverride none
Need all refused
< / Book >
#
# Note that, from this point forward you must precisely enable
features special # to be enabled - so if something doesn't work not as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# DocumentRoot: The directory you are going to use your
documents #. By default, all requests are taken from this directory, but
aliases and symlinks # can be used to point to other locations.
#
DocumentRoot "/ usr/local/apache2/htdocs.
< directory "/ usr/local/apache2/htdocs" >
#
# Possible values for the Options directive are "None", "All."
# or any combination of:
# Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named * explicitly *-'all Options '.
# is not give it to you.
#
# The Options directive is complex and important. Please see
# http://httpd.Apache.org/docs/2.4/mod/core.HTML#options
# For more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be 'All', 'None', or any combination of key words:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Need of all granted
< / Book >
#
# DirectoryIndex: sets the file Apache will serve if a directory
# is requested.
#
< IfModule dir_module >
DirectoryIndex index.html
< / IfModule >
#
# The following lines prevent the .htaccess and .htpasswd files to be
# seen by customers of the Web.
#
< files ".ht *" >
Need all refused
< / files >
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive in a < VirtualHost >
# container, error messages related to this virtual host will be
# logged here. If you * define an error for a < VirtualHost > log file
container of #, that host errors will be logged there and not here.
#
ErrorLog "logs/error_log".
#
# LogLevel: Control the number of messages in the error_log.
# Possible values include: debug, info, notice, warn, error, crit,.
# emerg, alert.
#
LogLevel debug
< IfModule log_config_module >
#
# The following directives define some nicknames format for use with
# a directive CustomLog (see below).
#
"LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
"LogFormat '%%u %t \"%r\ hour' % > s %b "commune
< IfModule logio_module >
# You must enable mod_logio.c use %I and frequency
"" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
< / IfModule >
#
# The location and format of the access (Common Log Format) log file.
# If you do not have any logfiles access set in a < VirtualHost >
container of #, they will be saved here. On the other hand, if you * do *.
# define per - < VirtualHost > access logfiles, transactions will be
# logged there and * not * in this file.
#
CustomLog "logs/access_log" common
#
# If you prefer a log file of access, agent, and referer information
# (Combined logfile format) you can use the following directive.
#
#CustomLog "logs/access_log" combined
< / IfModule >
< IfModule alias_module >
#
# Redirect: Allows to tell clients the documents used for
# exist in your server's namespace, but no more. The customer
# make a new request for the document at its new location.
# Example:
# Redirect permanent/foo http://www.example.com/bar
#
# Alias: Maps web paths into paths of file system and is used to
# access content that don't live under the DocumentRoot directive.
# Example:
# Alias /webpath/full/filesystem/path
#
# If you include a trailing / on /webpath, then the server will be
# require that he be present in the URL. It is also likely that
# duty provide a < Directory > section to allow access to
# the path to the file system.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as assumed names, except that
# documents in the target directory are treated as applications and
# executed by the server on demand, rather than as documents sent to the
client of #. The same regulation on flight "/" applies to the ScriptAlias
# as for the Alias directives.
#
ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".
< / IfModule >
< IfModule cgid_module >
#
# ScriptSock: On threaded servers, refers to the access path to the UNIX
decision # used to communicate with the CGI mod_cgid daemon.
#
#Scriptsock cgisock
< / IfModule >
#
# "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias
# CGI directory exists, if you have set up.
#
< directory "/ usr/local/apache2/cgi-bin" >
AllowOverride None
None of the options
Need of all granted
< / Book >
< IfModule mime_module >
#
# TypesConfig points to the file containing the list of mappings from
# MIME file extension - type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add or replace the MIME configuration
# the file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress. Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented out, then you
# should probably define these extensions to indicate media types:
#
AddType application/x-compress. Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain "manipulators": file extensions
# No actions associated with the file type. It can be either integrated into the server
# or added to the directive of the Action (see below)
#
# To use CGI outside of ScriptAlias directories scripts:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For maps of type (negotiated resources):
#AddHandler type-plan of the var
#
# Filters allow you to process content before sending it to the client.
#
# To parse .shtml for server-side includes (SSI) files:
# (You will also need to add "Includes" the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
< / IfModule >
#
# The mod_mime_magic module allows the server to use various boards of the
content of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the definitions of suspicion.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
((# 1) text 2) local redirects 3) external redirects
#
# Examples:
#Error Document 500 "The server made a boo boo".
#Error Document 404 Missing.html
#Error Document 404 "/cgi-bin/missing_handler.pl"
#Errordocument 402 http://www.example.com/subscription_info.html
#
#
# MaxRanges: Number of channels in a Maximum request before
# return the resource, or one of the extraordinary
# values 'default', 'none' or 'unlimited '.
# Default is to accept 200 beaches.
Unlimited #MaxRanges
#
# EnableMMAP and EnableSendfile: on systems that support.
projection in memory # or the sendfile syscall can be used to deliver
# files. Usually, this improves the performance of the server, but must
# turn off when mounted network is served
# file systems or if support for these functions is also
# broken on your system.
# Default: EnableMMAP, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on
# Additional configuration
#
# The configuration files in the conf/extra/directory can be
# included to add additional features or change the default configuration
# the server, or you can simply copy their content here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multilingual error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Entries to the fancy directory
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User directories
#Include conf/extra/httpd-userdir.conf
# Info in real time on the applications and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the manual for the Apache HTTP Server
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
< IfModule proxy_html_module >
Include the conf/extra/proxy-html.conf
< / IfModule >
# Secure connections (SSL/TLS)
#Include conf/extra/httpd-ssl.conf
#
# Note: The following text should be present to support
# start without SSL on platforms without equivalent/dev/random
but # a statically compiled in mod_ssl.
#
< IfModule ssl_module >
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
< / IfModule >
#
# Uncomment on the below to deal with user agents that deliberately
# violate open standards by abusing DNT (DNT * must * be a specific)
choice of end-users #)
#
# < IfModule setenvif_module >
#BrowserMatch "MSIE 10.0"; bad_DNT
# < / IfModule >
# < IfModule headers_module >
#RequestHeader unset DNT env = bad_DNT
# < / IfModule >
#= WLS 12 c routing Configuration. Seven 2015 =.
# Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.
# The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.
#-8002 port = SSL listener for api.astcorporation.com (managed server)
# - the port 443 = SSL listener for myast.astcorporation.com (managed server)
#
# Phases of deployment:
API.astcorporation.com:8001/myast # (1).
# VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443
# 3-test api & myast
# 4-regenerate private certificate + all certificates.
# Minimum nonclustered directive specifies WebLogic IP + port.
< IfModule mod_weblogic.c >
WebLogicHost 192.168.1.43
WebLogicPort 8002
Debugging now
DebugConfigInfo WE
Newspapers/myAst12c_WLS_error_log WLLogFile
WLS-JSESSION-ID WLCookieName
< / IfModule >
# Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server
< /myast location >
SetHandler weblogic-Manager
ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html
< / location >
# Added proxy
ProxyPreserveHost off
#ProxyPass /api http://API.astcorporation.com:8001 / myast
#ProxyPass /myast http://myast.astcorporation.com

I found my answer after I posted. I'll leave it here to help others...

The list of all instances of Apache that were started
- ' ps - ef | grep apache. "
Kill the persistent process

Error trying to deploy the BPM soa server process

Hello world
straggling to solve this problem but my cause my of my inexperience on BPM is worse than I thought.
Once JDev compiled the Bpm process without error and create the ProjectName.jpr., I tried to deployed the process on the server of soa, soa_infra partition.
What I did:
1. go on JDeveloper | The application browser.
2. Select and right click on the project of BPM.
3. the SCW deployment Action started
4 fill in the fields and click OK
I get this error:
"
[16: 35:38] error in deployment of archives sca_project_name_rev1.0.jar of partition on the server soa_server1
[16: 35:38] HTTP error Code returned [500]
[16: 35:38] Error Message from the server:
There was a deployment of the composite on soa_server1 error: deployment failed: error occurred during deployment of the component: nameComponent to service engine: implementation.bpmn, for composites: Project_name: ORABPEL-05250
Suitcase BPMN deployment by mistake.
error when trying to deploy the BPMN component file ' / coretech/fmw11/user_projects/domains/svil_domain/servers/soa_server1/dc/soa_8918455e-2622-4261-acd1-6e281a82a0d9 "; the reported exception: java.lang.NullPointerException
This error was an exception thrown by the underlying deployment module.
Check the trace for the exception in the log (the connection value level debug mode).
.
[16: 35:38] check the log of the server for more details.
[16: 35:38] error in deployment of archives sca_Project_name_rev1.0.jar of partition on the server soa_server1
[16: 35:38] # incomplete deployment. ####
"
Do you know why the deployment failed? The compilation was ok...
Thanks for all the help you can give me.
Fairlie

Hello

Suitcase BPMN deployment by mistake. java.lang.NullPointerException.

This could be a variety of reasons:

(1) my problem was solved when I checked the fabricruntime.jar for jdeveloper middleware House \jdeveloper\soa\modules\oracle.soa.fabric_11.1.1

and SOA home Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1 was different. So I copy the fabricruntime.jar of soa on jdev House home and redeploy the composite and it works.

My conclusions at that time was namespace error.

(2) you can also apply the below patch

Patch 14618452: NPE IS THROWN everything BY DEPLOYING a PROCESS WITH SEVERAL SUB-PROCESS/WRESTLING EVENTS

and then test the deployment.

(3) in other words, you can try this:

Stop, soa_server (s), node_manager(if running), Server Admin

Delete the cache files and for Admin Server and server SOA tmp files in $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/cache and $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/tmp

Same BOF Soa Server $ORACLE_HOME/user_projects/domains/base_domain/servers/Soa_server/cache

After that, restart the server

Redeploy the composite applications again since the file via the EM, or JDeveloper .jar or WLST script.

BPM deployment error: java.lang.IllegalArgumentException: Argument 0 for the @NotNull of oracle/bpm/project/interfaces/ConversationHelper.getReferenceNameFrom parameter must not be null

Hey guys,.

I get this error when I tried to deploy the process. Din could not do anything on the net

java.lang.IllegalArgumentException: Argument 0 for the @NotNull of oracle/bpm/project/interfaces/ConversationHelper.getReferenceNameFrom parameter must not be null

My composite application contains a certain number of processes. I added a BPEL process and then removed, but since then, appears it problems and could not deploy the composite application more. Any hint is appreciated.

the entire stack trace is:

Error when bean calling "domain manager": error deployment suitcase BPMN.

Additional detail

error when trying to deploy the component BPMN "D:\oracle\domains\BPMSOA_DOMAIN\servers\BPM_1\dc\soa_6b5472e6-f4dc-4cd1-a7b5-c7b81f5e24ab" file the reported exception is: java.lang.IllegalArgumentException: Argument 0 for the @NotNull of oracle/bpm/project/interfaces/ConversationHelper.getReferenceNameFrom parameter must not be null

This error was an exception thrown by the underlying deployment module.
Check the trace for the exception in the log (the connection value level debug mode).
ORABPEL-05250

Suitcase BPMN deployment by mistake.
error when trying to deploy the component BPMN "D:\oracle\domains\BPMSOA_DOMAIN\servers\BPM_1\dc\soa_6b5472e6-f4dc-4cd1-a7b5-c7b81f5e24ab" file the reported exception is: java.lang.IllegalArgumentException: Argument 0 for the @NotNull of oracle/bpm/project/interfaces/ConversationHelper.getReferenceNameFrom parameter must not be null

This error was an exception thrown by the underlying deployment module.
Check the trace for the exception in the log (the connection value level debug mode).

at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:202)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:949)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:128)
at sun.reflect.GeneratedMethodAccessor1654.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to com.sun.proxy. $Proxy345.deployComponent (unknown Source)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNServerManagerBean_6gbx7k_IBPMNCubeServerManagerLocalBeanImpl.__WL_invoke (unknown Source)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNServerManagerBean_6gbx7k_IBPMNCubeServerManagerLocalBeanImpl.deployComponent (unknown Source)
at oracle.fabric.CubeServiceEngine.load(CubeServiceEngine.java:923)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:703)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:157)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployComponents(CompositeDeploymentConnection.java:243)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:94)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:185)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:86)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to com.sun.proxy. $Proxy438.load (unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:67)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

The answer late, sorry it was a bug in the product, was fixed after you apply the hotfix.

Cheers, nasser

ORABPEL-02076 charge moniker object.

Hi all
Jdev version 11.1.1.7.0
Procees BPEL is get restored after the call to the Web service, it is not showing error in the em console Jacky.
also invoke successfully finished with the valid response message.
In the newspaper, I could see below more details,
An internal exception has not correctly processed by the server.
Set the logging level for all debug logs and submit your request again. Server log should contain a more detailed report of exception.
Exception: ORABPEL-02076
Could not load moniker object.
failure to deserialize an object of its size of nickname. the reported exception is: version fields have changed on the variable of the entity. Version checking field ObjectVersionNumber = old value = 8 new value = 9
An exception was thrown by the underlying persistence subsystem.
Set the logging level to debug mode. Check the log for the underlying stack trace of the failure of deserialization exception.
Treated as: com.collaxa.cube.CubeException
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
ORABPEL-05002
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.instance.PerformMessage '; the reported exception is: Exception unhandled by the Collaxa Cube system.
an unhandled exception was thrown in the Collaxa Cube systemr; reported exception is: 'ORABPEL-02076.
Could not load moniker object.
failure to deserialize an object of its size of nickname. the reported exception is: version fields have changed on the variable of the entity. Version checking field ObjectVersionNumber = old value = 8 new value = 9
An exception was thrown by the underlying persistence subsystem.
Set the logging level to debug mode. Check the log for the underlying stack trace of the failure of deserialization exception.
at com.oracle.bpel.entity.dataprovider.impl.EntityObjsHolder.finalizeLoading(EntityObjsHolder.java:125)
at com.collaxa.cube.engine.data.CubeInstancePersistenceMgr.finalizeLoading(CubeInstancePersistenceMgr.java:386)
at com.collaxa.cube.engine.data.CubeInstancePersistenceMgr.load(CubeInstancePersistenceMgr.java:154)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:4211)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:4201)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1083)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.handleWorkItem(CubeEngineBean.java:379)
at sun.reflect.GeneratedMethodAccessor2363.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.oracle.pitchfork.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:103)
to oracle.security.jps.ee.ejb.JpsAbsInterceptor$ 1.run(JpsAbsInterceptor.java:113)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:100)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:154)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:113)
at sun.reflect.GeneratedMethodAccessor1409.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Can someone please help me solve this problem?
Thank you
Santosh M E

Reason: this exception was coming due to link the entity activity in BPEL services and this Bind entity is replaced by BC ADF service call and this problem has been resolved.

Value EL debugging

Similar Questions

Maybe you are looking for