"NO PROGRAM IS INSTALLED ON THIS COMPUTER.

Similar Questions

• MacBook will not be upgrading to El Capitan - "cannot be installed on this computer.

  I'm trying to upgrade a macbook to El Capitan but I get this message from the app store: "this version of Mac OS x 10.11 cannot be installed on this computer."

  If I click on "Learn more" nothing happens. We just bought this macbook off ebay and it seems to have had a clean operating system installed and I just ran the update of the program, so everything is up to date.

  This is a Macbook 4.1, Intel Core 2 duo 2.4 ghz, 2 GB of memory. It is currently running 10.6.8.

  I searched the forums and online and see no reason why it won't even download the update... Any help would be appreciated!

  This computer has a 32-bit EFI and cannot be updated past 10.7.5.

  (143236)

• A later version of the Apple software update is already installed on this computer.

  Recently, I had a new iPhone 5, so I had saved my old iPhone 4 with iTunes so I could transfer all my information. But when I connected my iPhone 5 it came with this message: "the"Rachel's IPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.come to download the latest version of iTunes. " The iPhone 5 is iOS9.2

  So, I went on the website to download iTunes, since this was the 12.1.2 version and should be downloaded 12.3.2, went to do the implementation, then it came with the message: "a later version of the Apple software update is already installed on this computer." So, I tried to uninstall it (after each step on the Apple Support to do) but when I went back to uninstall all apple programs, I could not find "Apple Software Update", it wasn't in my programs...

  I did all the steps anyway, and the same message of "a later version of the Apple software update is already installed on this computer." came after I tried to reinstall iTunes.

  So, I guess my overall question is, what should I do? How can I fix?
  Please answer quickly.

  Try to repair the Apple Software Update of the programs and features Panel, remove it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error "No products affected by this software update are installed on this computer"

  Original title: can't get .net Framework install... The message "No products affected by this software update are installed on this computer."

  I'm running XP x 64... This is a clean install.  I tried to start an application and he wrong on the .net Framework, so I went out and me 2.0 for x 64 and now the app works, but I can't get 2.0 installed SP2.  I have currently 2.0 SP1 is installed and 3.0 shows as installed in Add/Remove, but I do not show this link registry keys

  http://support.Microsoft.com/kb/318785

  and the netfx_setupverifier.exe sees only 1.1 SP1, and 2.0 SP1...

  Help, please

  Hi rgn21,

  -Do you get the error message when you install Microsoft .NET Framework 2.0 Service Pack 2 or .NET Framework 2.0 Service Pack 2 CLR Security Update?

  Follow the steps below to solve the problem:

  Step 1: Offline installation

   

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Microsoft .NET Framework 2.0 Service Pack 2

  Step 2:

  If the error message you mentioned appears when you try to install .NET Framework 2.0 Service Pack 2 CLR Security Update, follow these steps:

  a. Uninstall kb 976569 and kb 976570 of Add/Remove Programs.

  b. install kb 974417

  c. reinstall 976569 kb and kb 976570

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Import email from Outlook to Vista Mail: "MAPI not installed on this computer...". »

  I'm trying to import my email on a computer with Outlook to my new laptop with Vista Mail.  When I select Import/Outlook, I get the following error message:

  "Messages can be imported from the MAPI client.  MAPI is not installed on this computer or an error occurred while initializing it. »

  How to tell if MAPI (whatever it is) is installed on my new laptop HP Pavillion?  If it is not installed where can I get it?

  Thank you!!

  Bart,

  Outlook Express must be installed with Windows XP by default.  If you go to Start, then all programs , it should be in the list.  Let us know if you need assistance, but it should be there.
  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Windows cannot be installed on this computer" when trying to install Windows 7 Professional on laptop HP Envy 4 comes preloaded with Windows 7 Home Edition basic

  I bought a new hp envy 4 portable that this laptop is coming with the preload windows 7 Home Basic when I try to install windows 7 32-bit professional, but when it is copied all of the files at the end of the installation of finishing it showing error message that windows could not be installed on this computer hardware. Please suggest the best solution.

  Thank you
  Vishal

  Have you tried using Anytime Upgrade?

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• This version of macOS 10.12 cannot be installed on this computer.

  What does that mean? I try to download on the App store and I get a popup saying "this 10.12 macOS version can not be installed on this computer."  I click on "Learn more" and nothing happens.  I've recently upgraded to El Capitan without problem.  I am running a mid 2007 24 "iMac that works as good as the day I bought it! Help!

  The message is correct. See below.

  • MacBook (late 2009 or newer)
  • MacBook Pro (mid-2010 or more recent)
  • MacBook Air (late 2010 or newer)
  • Mac mini (mid-2010 or more recent)
  • iMac (late 2009 or newer)
  • Mac Pro (mid-2010 or more recent)

• I have 1 2010 Macbook and I could not install the new OS. I'm on 10.6.8. and get an error message saying that it will not install on this computer. Thank you

  I wonder if my Macbook must be sent to the trash since I can no longer get updates to the OS. I have 10.6.8. When I try it tells me that they will not be installed on this computer. It works fine but I do not receive security and other software updates any more. What can I do?

  The computer has a value for someone who does not have a new OS X and does not use

  the last iDevices; Thus the old app from iTunes and stuff would be a good deal, as it is.

  Without more information on the model number and build year, propose any later version

  OS X update (because there may be one or two; if nothing shows up on the Mac App Store)

  However, without more information, such as the about this Mac can show you the

  Details on my side that are not lacking.

  • How to identify MacBook - Apple Support models

  {This page to support old shows original - and also new macbook 12 in. of retina series}

  What is your MacBook (13-inch, mid 2010) computer model?

  This is the May 2010

  Abandoned by July 2011

  Model identifier MacBook7, 1

  Model number A1342

  EMC 2395

  MC516LL/A order number

  The link to the support page above also includes how to identify the details in a separate link in it

  that tells how to find the serial number and other specifications. Sites such as the

  http://EveryMac.com include most if not all Apple product specifications.

  If the computer that you have is a MacBook 13-inch Mid-2010, he could run the new OS X

  However, if the old hard drive is full, saved from the old stuff, you want to get an external

  Hard drive and create an archive of it; Perhaps a clone of the complete system. However if you

  use a time Machine, which can help in some cases. The original hard disk can be

  have worn out, so it might be a good idea to replace it with a new larger capacity

  hard drive. In addition, chips of memory could be improved to higher total capacity, too.

  Those things would give the MacBook OSX current or most recent advantage.

  If the computer is far from the trash. Those who are still worth something, too, if sold at

  an individual and not some buy-TI - cheap.com. If you choose to be rid of the macbook:

  • What to do before you sell or give away your Mac - Apple Support

  • How to prepare your Mac for sale:

  http://www.thesafemac.com/how-to-prepare-your-Mac-for-sale/

  The browser upgrade: your model may use Mozilla's Firefox, he sees updates...

  • How to download and install Firefox on Mac - Mozilla Firefox Help:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  Anyway, the computer is new enough to be of good use.

  Most of my friends is older than that!

• My attempts to run VMWare player v4 ends by, "VMWare player cannot be installed on this computer.

  Where is my VMWare

  My attempts to run VMWare player v4 ends by, "VMWare player cannot be installed on this computer. VMWare player requires not on your CPU. "See the notes product for hardware and software configurations specific.  VMWare player v4 has been previously on my computer which, for about a month, has not if used causes of unemployed in the city. When I went to use the PARALLEL machine, it wasn't there. I went to the website and charge VMWare player v4 and tools for this. The above message appears with a reading of Kael'thas window, it of a FLP file and needs internet to find a site to open it. I downloaded Free File Viewer that gave no results. I'd be happier than a pig in the cool mud to fix this problem. Thank you for any assistance.

  Looks like a BIOS setting may have changed (in terms of virtualization).

  Unlikely a Windows problem.

  Uninstall VMware Player.  Restart the computer.  Download the latest version of VMware Player (save to your computer) and install it.  Restart the computer.  Try to run it.

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to limit the number of printers can be installed on this computer by using Group Policy?

  How to limit the number of printers can be installed on this computer by using Group Policy?

  Hello

  Thanks for asking! If I understand correctly, you should limit the printers installed on the computer by using Group Policy. I suggest you follow the troubleshooting steps to check if this may help.

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Card is either off or no Ethernet card Ethernet is installed on this computer

  Today I lost full use of my wireless router. I realized when I've upgraded to Windows 8 I forgot to reinstall the software for my wireless router netgear.

  So I'm going to install and it says ' card is either off or no Ethernet card Ethernet is installed on this computer. I went on their site, there is no clear indicator that my router is compatible to Windows 8. My Netgear router is a N-300 (WNR2000v2).

  I also tried access http://192.168.1.1 but it doesn't show up.

  Does anyone have any suggestions.

  is not the gateway 192.168.0.1?

  From your desktop

  Right-click of the network connection icon in the notification bar

  Select open network and sharing Center

  in the left navigation pane, select change adapter settings

  That should tell you if it is installed or not. If it's disabled right-click on it and select Enable.

  Hope that helps you

  Brian

• "VIX is not installed on this computer" problems on 2008R2

  Hi all

  I get the following message is displayed:

  Waiting-tools that the requested operation cannot be performed because the VIX is not installed on this computer. Please install VIX if you want to use this feature.

  The thing is that the VIX is installed, I even reinstalled PowerCLI including VIX (get the warning that will be installed).

  I'm running PowerCLI (PowerGUI) on a Windows 2008 R2 64-bit server.

  Are there more people who stumbled upon this problem and is there a solution to this?

  You can try this client PowerCLI 32-bit on this computer.

  VIX is 32-bit only I'm afraid.

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• How can I determine if a non-LabVIEW windows program is installed on a computer?

  I would like to know how to generate a true/false condition, based on the question of whether a program is installed on a target computer. I have a few applications that must adjust with their features, based on the computer on which they are installed, so I just need to keep a version of the code. The first stage of the program would be to check the program files (x 86) program or the registry to determine if the program is installed. The result will move to the next step, which is that if the program is not present, then is a specific GPIB device attached? I think I can determine that in trying to initialize the device and reading a cluster of error. What I have a problem with is to determine if a program related non - National Instruments is installed on the target computer. Any direction toward the solution is greatly appreciated.

  All methods:

  http://zone.NI.com/reference/en-XX/help/371361J-01/Glang/windows_registry_access_vi/

  Exasmple:

  https://decibel.NI.com/content/docs/doc-12290