No redundancy of network management on some hosts since the upgrade to 175625

Similar Questions

• jpg and videos do not open some sites since the upgrade to FX 39

  Don't know what hurts, but the first attempt at this has no post. I was connected at the time.

  Links that do not open correctly (jpg files and videos (YouTube, etc) are on certain sites only, others work as before.)

  The jpgs on 'broken' websites appear as a large full gray area, a border around a white box, or a small icon. Right click on one and select open in a new tab, the are displayed correctly. Just as same behavior with links of PNG files.

  The videos show as blank spaces. Make a right click on this space does not offer a new tab (share this page, save the page slot, etc..)

  I'm on a laptop of HP under Windows 7 Pro; My wife on a Dell laptop, also Windows 7 computer doesn't have the problem. I have several modules more than she does.

  Thank you

  togfnh said

  Thank you, Bryan.

  I opened an old profile and both related JPGs and YouTube videos open correctly. What happened in (or around the same time that) upgrade affected the current profile.

  Question: opens a new profile of the best way to solve the problem, or is there something else I should try first?

  Thank you

  You might want to try dumping your cache and if unsuccessful following would be to clear out cookies.

  You add or remove plug-ins since it last worked properly?

• No redundancy of network management

  Hello

  I have two ESX. When I add a cluster, the 'Redundancy of network management' WARNING, the error will remain there forver since I have only one Console only.

  In addition, will be network connection vmotion using the "Cable CROSS' instead of conneting to a supported configuration

  Thank you

  see this KB article

  http://KB.VMware.com/kb/1004700

  .. and Yes you can use a cross over cable for vmotion.

• My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

  Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

  I have some technical knowledge, but I'm not a COMPUTER guru.

  Ch6tty

  Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?

• Since the upgrade to free 29 arrows of browsing some sites do not work. Is there a solution by chance?

  Since the upgrade to free 29 arrows of browsing some sites do not work. Is there a solution by chance?
  I think this story says it all. The most problematic sites are mainly news sites
  http://Compaq-desktop.AOL.com/#
  It has 1-40 or 45 new photos which can be browsed through by clicking on the arrows. Before the update without problem.

  Problem solved, if only temporarily.
  It's as simple as switching to the ad-blocker for the site only.

• Network management using a trunk for the connectivity port

  Hi all

  I'm currently developing a couple of hosts with a unique vswitch esx. Ideally, I would like to allocate 4 physical NICS on the host to connect to my physical network via 802. 1 q trunks. These network interface cards will then be used by some groups of ports for example vlan 10,20 and 30. I also want the Group of ports management network the vswitch using one of/all of these ports of junction for its uplink to the physical network. However, I seem to lose connectivity to the host whenever I put the port network management group vmnic to one vmnic that is attached to an uplink of trunk. If I allocate an uplink access and secure it to the management network port group I do not seem to have everything get to the problem of the host.

  I have to do something wrong as having to use a physical network adapter, mapped to a vlan access, just for hospitality management seems a bit exaggerated.

  Any advice would be greatly appreciated.

  See you soon,.

  CiscoKid

  Hello Ciscokid,

  is not a problem to achieve what you want. What VLAN id you use for the management network? You specify this number VLAN on the portgroup of management?

  Do you have any "vlan native" on the physical switch port?

• Questions of CMC M1000e redundancy since the upgrade of the Firmware 5.00

  Hello

  We see a lot of the following alerts

  "Chassis management controller (CMC) redundancy is lost '.

  and 30 seconds later

  "The chassis management controller (CMC)" is redundant".

  on our fleet (47) of the chassis, since upgrading the firmware to 5.00.

  It happens every day on some chassis, which, before the update, maybe obtained a such report once a month, if that.

  Everyone knows about this problem?

  THX,

  John Bradshaw

  Bradje1,

  I'm doing research on the issue for you, and it seems that there is another way out in the future to replace 5.0. In this time, but if you want you can either restore the CMC firmware to the previous version, or ignore the error up to the new CMC update is released. Sorry for the inconvenience.

  Let me know if that answers your question.

• network time consuming to connect since the installation of readycache

  Hi guys

  Although my readycache works great and theres no problem, the network takes longer than usual to connect, so much and so well I start now 'steam' client manually

  is there a way to get the network connected before caching software... or is this a known problem...

  This isn't a question of bad because it connects after 45 seconds, but it would be good if theres a solution or a fix for this

  Thanks a lot guys!

  I'm not an expert, ReadyCache, but:

  In general, you want to implement caching as soon as possible in the boot cache process all possible startup hard disk reads.

  So, it could help Sandisk work on this, namely:

  your version of Windows

  configuration of your disk (I assume that you are starting and all loading from a Windows partition active)

  any other network management software, such as management software router, which

  your security software

  all that when you start, look at / works with your network connection.

  I have a funny feeling that it is something that would be more easily fixed at the end of steam.  Your steam load after start up is probably the best solution.

• Considerations for the host of the upgrade of Vista HomePremium for Win 7

  I have a large 64-bit Vista HomePremium PC as the host operating system. I've got VMWare Workstation 6.5.x running as an application on Vista and it supports two computer called Windows XP (essentially nothing else that VMware is running on the host).

  I think the upgrade to Vista from readings elsewhere. Assuming that succeeded, it would be an appropriate next steps approach?

  • Re-install the VMware Workstation application on new host (Win 7)

  • point this VM Workstation application newly installed on the definitions of existing virtual machine (GER) for Windows XP 2 clients

  I'm sorry not to use better terminology in my question. I hope my question makes sense for a VMware guru. I have a bit of memory on the use of the MS Virtual PC 2007 product and I think I understand the concepts but my terms are probably passing offshore for VMWare.

  Other ways to address this issue are:

  • is there a list of audit planning things to do before you change your host operating system while you are a user of VMWare Workstation?

  • is there a special version or service pack for VMWare WS run on a host Windows 7 (64-bit) machine?

  jjamjatra wrote:

  Thank you for your comprehensive reply and suggestions. As I answered Naki, know nothing about the intentions of VMWare on the 'official' support for Windows 7?

  Official support for Windows7 as a host and guest will be included in VMware Workstation 7, which is currently in version beta (in fact it is now at the stage of the Release Candidate).

  VMware comment on dates for the next version, but my guess is that 'soon' is based on the fact that it is more listed on the page of Beta here: http://communities.vmware.com/community/beta

• Adding host during the upgrade

  Hi all

  Currnetly has 2 ESX 3.5U4 hosts that I would like to upgrade when adding a new host 4.0 (#3) running.  Kind of curious that the best route would be to get it all done.  Can I upgrade vCenter to version 4 and able to see my 3.5 hosts?  I thought of the vCenter update, and then install the third host and then upgrade the other two hosts in its version 4.  Is this a possible track to get this done or are there problems?  Any help is appreciated with this.  Thank you

  Perry

  Hello.

  Can I upgrade vCenter to version 4 and able to see my 3.5 hosts?

  Yes.

  I thought of the vCenter update, and then install the third host and then upgrade the other two hosts in its version 4.  Is this a possible track to get this done or are there problems?

  This looks like a great approach.

  Any help is appreciated with this.  Thank you

  Be sure to read the Upgrade Guide, because it has a lot of information in it as well.

  Good luck!

• CTL-alt-del does not launch the Manager of tasks, but since the taskbar, "start Task Manager" is. The 'Windows key' + n, where n is M, E, F, etc also fails to do something? Teacher of Win7 64-bit. Any ideas?

  CTL-alt-del is not launch task manager, but the fact Task Manager start from the taskbar.  The 'Windows key' + n, where n is E, M, F, etc also fails to do anything?  Teacher of Win7 64-bit.  Malwarebytes found nothing, neither did a full scan with MSE. There is some malware on board?  Where can I find it? Any ideas?

  Chris

  CTRL-Alt-Del does not bring upward the more after XP Task Manager - it brings up a different menu options:

  

  The options presented are also slightly configurable via Group Policy, if your system is equipped with:

  http://www.thewindowsclub.com/customize-ctrlaltdel-screen-Windows-7-Group-Policy

  You can kind of 'test' on your keyboard with a built in Screen-Keyboard Windows.

  All programs, accessories, ease of access, Screen-Keyboard.

  When you press a key on the keyboard, it should light up on the screen keyboard on (by pressing Ctrl):

  

  Of course, we don't know anything about your system (desktop, laptop, keyboard, PS/2, USB, wireless wired keyboard) so you may need to see if another keyboard works, another USB port, batteries, etc...

• A host of crashing since the upgrade to vCenter 5.0

  Hello

  Since we have improved our environment vCenter 4.0 to 5.0 landing of crashes on some but not all esx hosts in our environment. Could not

  to understand why some become that, but his does not not all hosts. We run a mixture of vsphere 4 and 5 guests. Let me know which connects needed etc.

  Are the hosts crashing 4.0 running? If yes what level updated? If the update 2, they must go to day 3 - problem with 5.0 and vsphere 4.0 vcenter known u2

• Since the upgrade to FF6 some card sites is not displayed

  This site allows to work with all previous versions of FF.

  I suspect that maybe Java associated, because they are automatically disabled in FF6

  You can see the Console Java extensions disabled, but is not effect the Java plugin that is used for Java applets.
  
  Your list of system details more shows the Java plugin, but this plugin is not required on this page.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Since the upgrade to 4.01, bookmarks manager is missing. Anyone know what happened?

  Under 'File', I can import bookmarks, no option here for export.
  Under 'Bookmarks' there is no bookmark manager anywhere to be found.

  It was changed to "Show all bookmarks" in the bookmarks menu

• Some of my files pdf (since the upgrade to Acrobat CD player) have dimmed white. How can I get rid of this so I can read what is erased?

  I installed Acrobat Reader DC version 2015.007.20033 on May 3, an upgrade to the previous version (which worked perfectly). Now, some of my PDFs have gray blocks obfuscate text (which I imagine is currently hidden by blocks). In some cases, the entire document is illegible. That's happened? How can I get rid of the problem?

  Try going into preferences > Page display > content and information of the Page and don't forget 'See the large images' are checked.