Voice speed up in podcasts

Similar Questions

• Speed in my Podcasts

  Thanks to the new format on my podcasts, I can't find the speed controls. They are not where they were before and seem on the contrary were replaced by the second symbols 15 forwards or backwards. Any ideas how I can access?

  Playback speed is controlled from the playback screen now. Top of page 1, 5 x, 2 x, etc., to the left of the jump back button.

  

• How can I adjust the speed of reading podcast on Apple TV 4?

  POdcasts are now playing at half speed or slower on my Apple TV 4. I was all control with a universal remote and somehow changed the playback speed. I initially has the speed to 2 X normal and then managed to do play a.5. This affects all the podcasts and persists after restarting.

  How to restore to the normal playback speed?

  I had the same exact behavior. The only thing that worked for me to restore the correct playback speed is to reset Apple TV.

  I spent an hour on the phone with Apple tech support on this issue tonight (January 26, 2016) and no alternative surfaced. And we have tried almost everything.

  I personally just believe Apple left the control of playback speed of this version 1.0 of the application, while our universal remotes (mine is a Logitech Harmony One) have the ability to accidentally (although irreversibly) trigger the function.

  If Apple contact me with a solution, I come back and post it here.

• Dealing with purge of one voice channel to another Podcast. Chaining aside?

  I recorded a podcast with a new audio kit episode. 2 dynamic microphones in a blender, recorded on hearing CC via USB with a microphone on each channel.

  Now I'm editing it I found that a speaker, Mark, is quite much stronger than the other, Ben, and Mark can be "heard" by Ben's mic.

  CH 1 - Mark speaking loud and clear the voices.

  CH 2 - voice gentler Ben. Crosstalk between Ch 1 is quite noticeable.

  As a result, purge of Mark in Ch 2 creates an embarrassing mixture echo when he speaks, and Ben is not. If I solo Ch 1/Mark, her voice is nice and crisp with no echo. When Ben talks to himself, the mixture is also nice and crispy because it is not strong enough in the room to mic effect mark.

  What is a good way to deal with this? I played a bit with chaining aside some dynamics processing (I'm totally new to side-chaining). It is 'ok', but it's a bit hit and Miss, in some cases when Mark and Ben call string active side Marc Ben DP, cut him too.

  That explained everything well? Hard to explain something when I don't know the terminology to explain it is!

  I guess every studio with 2 people or more on pickups in the same room must have this problem of "purge". How he usually treats? Next time I record, I think I'm going to try and move the microphones away from each other at first.

  Post edited by: Ben Hutchings to add more details and correct a misleading title.

  Well, chaining front side I think I might try a simple noise gate.  Carefully put in place on the channel which is picking up 'the other guy' it might work for you.

  However, if an "automatic" solution (door chain or noise side) does not work for you, and it could never be perfect - be prepared to go through and manually adjust levels manually.  You will be surprised how quickly you can get with a little practice.

  Long term, you're always better off trying to avoid this kind of problem at the time of registration.  Simple things like choice of microphone and positioning can make a big difference, as can moving your speakers a little further out.  Assuming the use of directional microphones, putting the microphones back to back to use dead spot in picking model... and mobile people a little father goes to use the "inverse square law' might well give you what you need without a lot of treatment.

• Adobe Reader - The rate of speed for the 'voice', Can be adjusted?

  Hello

  I want to make the 'voice' of Adobe Reader, read more slowly for me when he reads a .pdf file. Is this possible, and if so, how to adjust voice speed in Adobe Reader?

  Thank you! J.

  Hi UMA_Jen,

  Please follow the below mentioned steps to regulate the flow of speech and volume according to your requirement

  1. Open Adobe Reader
  2. Click Edit > Preferences
  3. Select read under category (see attached screenshot) left side
  4. Set the option

  

  Let me know if you have any other question

  Kind regards

  ~ Dominique

• Browsing podcasts?

  for the last two weeks, no matter what podcast that I listen to by using the application of podcast apple plays faster and the people speak, as they are on helium. Anyone else having this problem? I am on iOS 9.2 on an iPhone 6 more

  Hey there Jovi guitarist.

  I understand that you have a problem with your Podcast application. Looks like you have set the playback speed of your podcasts inadvertently. You can find more information on how to address this in the following article:

  Podcasts app for iOS: playback controls - Apple Support

  https://support.Apple.com/en-us/HT202489

  Thank you for using communities Support from Apple. Have a good!

• Before do not recognize the voice dial commands

  I have PRE (he loves) with blue Ant Q1 headset. T1 has commands voice speed dial which supposedly map on the first 8 speed dial numbers PRE; However, the PRE does not recognize the voice command and the call is not made. Anyone know how to configure the PRE to recognize BlueTooth voice commands?

  Dude... I think that there was a ton of messages until this case to this.  Basically, the pre does currently support voice dialing, according to the these positions.  Perhaps a future Bluetooth update?

• Numbering of the numbers of extension adding quick of blackBerry Smartphones

  Hi guys,.

  Whenever I have dial a number through speed dial, after the call is connected he composed so some other figures that have been accidentally introduced. Can someone tell me please how to prevent it to dial extension numbers. He was accidentally configuration via the wizard of e-mail voice speed dial, and I can't work on how to restart the wizard.

  See you soon.

  Hi and welcome to the forums!

  On the main screen, press the green button on the screen of the phone, press the options key, menu,

  Smart dial. Make sure the fields are properly defined upward, save and exit. Test.

  If you have all the unwanted numbers on speed dial, so I suggest you check each number listed.

  Thank you

  Bifocals

• podcasts for iOS 9.3.1 how to adjust the playback speed

  I have I am on OS on iPhone 6plus 9.3.1.  Using podcasts to apple app 2.4 (1125.29) version, my podcasts are now playing faster than normal.  I don't see a place on the drive or in the settings to adjust the speed.  Is this one?

  Thank you

  Bruce

  Wwhen you view is on the air, look on the side left, where I've highlighted.

  

• Podcasts on slow speed?

  I have a 8 GB new Fuze and I noticed something weird.  The podcasts I downloaded are half, or a fraction, speed reading and for his idle.  Has anyone else encountered this problem?  Is there a fix or I would stay the * bleep * thing?

  See you soon

  by default, the playspeed for podcasts is set to slow. Simply click on the sub-menu (at the bottom of the scroll wheel) button and set the speed to normal.

• SRP547W voice > user # > setting Dial - access speed?

  How is the voice > user > number of speed dial settings accessed from a phone keypad?

  Is the field in the settings page a string of numbering plan?

  Unlike the entires selective settings call forward, this area seems to accept only a phone number or URL.

  Therefore, I don't know how to access from the phone keypad.

  Hi Gary,.

  Once configured, it must simply press n and then #-where n is the index of speed dial (2-9).

  Kind regards

  Andy

• Volume of voice podcast

  Some podcasts have a host that is strong and a guest who speaks softly.  Is there a way to even this out somehow?  Thank you.

  Hello!

  Looks like you have a podcast where audio between the host and the guest didn't is not tied properly. Normally the sound levels is determined or adjusted on the side of podcasters, and there is no way to change that on your side. However, you can achieve some results by adjusting the iTunes Equalizer:

  12 iTunes for Mac: adjust the sound quality

  Otherwise you can submit your comments to the podcast directly or leave a comment on the iTunes Store:

  Add a comment or leave a note in the iTunes Store or App Store

  Thank you for using communities of Apple Support.

• Can I increase the playback speed (ala VLC) while listening to MP3s on video?

  Hello

  Most of my audio files on my clip are NOT music. Most of my audio files are audio 'spoken word '. Here are the files audio of people talking to each other, or giving speeches, or read a book. I would like to be able to increase the speed of the audio, while keeping a normal height (not "chipmunk" voice).

  VLC does it well. I can increase the speed of playback of an audio file (or even a movie file), and VLC does his magic to keep all the sounds in regular field. (I'm mentioning VLC just to inform you of something I consider as a solution).

  My preference is that I would be able to control the speed of playback of the clip. ... In order to go to 2 X speed for a portion of the audio, then 1.50 X for another part. (I am stating this preference from the beginning, just in case someone proposed a solution of "desktop computer". A "computer desktop" solution is fine, but change-speed capability of reading on-the-fly on the Clip would be better.)

  Just to let you know, these audio files of my friends are mostly regular MP3 files. Some are M4B (audiobook). Some are files 'podcast-kind. " But most are simple MP3s.

  How can I do this?

  Thank you.

  Rockbox is great.

  I was able to increase the speed of reading without any voice of chipmunk.

  I activated TIMESTRETCH, that allows to change playback speed wihtout affecting the field of recording.

  Setup instructions for Sansa Clip v1 here: http://www.rockbox.org/wiki/SansaAMS#Installation_for_Stable_e200v2_F

  The manual is here:

  March 20, 2010
  PDF 916 KB
  HTML-zip 517 kB
  Online

  Thank you, Rockbox!

• Problems with the Podcast

  Everything works fine on my Fuze, except Podcast.

  I subscriptions multiple podcast, and they sound very good on my computer. However, when I sync them with my rocket, they sound funny. The voice in his Podcast slower and deeper, as somehow the playspeed gets turned down during the synchronization.

  I tried using different applications for synchronization: WMP, Mediamonkey (which is optimal btw), direct drag-n-drop. Nothing does.

  Everything is fine - videos, music, tv recording, photos: they all work. Just not the Podcast.

  Anyone have any ideas?

  Thank you!

  Check your system settings. It seems that podcasts playback speed is to slow down. Set it to normal (or fast if you want to).

• iTUNES Podcast App on the iPhone with the NEW IOS 10

  With the new update, I find that my podcast with iTunes app speeding up shows. Anyone else having this problem?

  Podcasts allowing control of playback speed. You probably activated accidentally.