No report of Directors GANYMEDE + after upgrading to 4.1 ACS
Hello
I was running ACS 4.0 demo version. Everything worked very well.
After the upgrade, and keep the old configuration, I can't see logs in the reports of the directors of GANYMEDE. I kept the configurations of the router and get the same thing, so I think that the problem lies in the ACS software.
I tested a few debug, and it seems that the router sends the command that is typed to the ACS.
Here is the config I have? m using:
AAA new-model
GANYMEDE-Server 192.168.X.X XXXXXXXXXXX host key
AAA authentication telnet connection group Ganymede + activate
enable console AAA authentication login
the AAA authentication enable default group Ganymede + activate
AAA accounting send stop-record an authentication failure
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 1 by default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
AAA accounting arrhythmic telnet connection group Ganymede +.
Line con 0
exec authorization no.-AUTH
console login authentication
line vty 0 4
exec authorization AUTH
authentication telnet connection
AUTH AAA authorization exec group Ganymede + none
AAA authorization config-commands
No.-AUTH AAA authorization exec no
AAA authorization commands 0 default group Ganymede + none
1 default AAA authorization commands group Ganymede + none
default 15 AAA authorization commands group Ganymede + none
Hello
It is a known issue, you must apply the hotfix ACS 4.1.1.23.5 to solve the problem.
Patch for the unit is available on
http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES
The patch name: ACS SE 4.1.1.23.5 rollup
Patch for windows acs is available on
http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES
The patch name: ACS 4.1.1.23.5 rollup
That should solve the problem
Kind regards
Jagdeep
Note: If this answers your question, then please mark this thread as solved, so that others can benefit from.
Tags: Cisco Security
Similar Questions
-
After upgrading the bios to version 2.13 t430u, it freezes at black screen
Hi all
After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.
Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.
CHANGES IN THIS VERSION
Version 2.15
[Problem resolves]
-Fixed a problem with the black screen after BIOS update
-Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup
V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724
Thank you
-
Flash player not working not not after upgrade to 11.2
ENVIRONMENT:
PC clean and kept clean by me (owner of the COMPUTER company)
Windows XP Pro 32-bit SP3, Pentium 4 3.0, 4 GB of ram.
Mozilla firefox 12.0, 32-bit (not marked as 64-bit, so I guess that 32-bit)
HOSTORY:
I have updated flash player on my PC as Flash asked me to upgrade.
I upgraded to 11.2 (plugin version 11.2.202.235 and version activex or 10.3.185.5) about 2-4 days ago.
I noticed after upgrading my web videos were not playing correctly (but at the same time as I had updated my a Netgear to a sonicwall router, so I thought that the problem is maybe there.
After much online video plays do not, I went to the other PC where I have not being updated for flash 11.2 and tried the same videos and they worked. It is therefore obvious that my router is not the problem.
Here is an example of a video which will be now. do not play on this specified PC but will play on my other PC
http://News.Yahoo.com/video-failed-space-shuttle-launch-really-awkward-165629432--finance. HTML
Do not play, I mean: the video will display the first image it loads. If I click on play it will look like it is buffering. But he might start to play from 1 to 3 seconds (with no sound) and then freeze for ever. If I click on pause and then play again, the progress bar downstairs will move forward in the film about 10 to 40% (apparently the jump depends on the delay between when I expect after the first second of 1 to 3 of the game, I press play and then later and pause buttons), then once again It will play a second or two without noise and even once be frozen forever.
Adobe says here:
http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html
How to troubleshoot the flash. I went to the "flash player doesn't work/windows7" troubleshooting options.
I've deleted all the flash player, data navigation, removed the cache of flash player disabled material acceleceration, and now I'm the report here.
I guess I need restoration until adobe figures this out (Yes, I know what assume spells).
This page told me how to uninstall and reinstall and some other options, but nowhere he told me how simply rollbacxk to the previous version, the whattever version it was, I don't know as I don't have it to follow the current version of flash when it works.
PERSONAL NOTE: I HATE auto update crashing my stuff. This is the reason why I disable the automatic update and am more than happy to stay 2-20 versions behind until what I am forced to upgrade to do something, I want to work. But F'in adobe begins to turn aut update on every product it creates. I HATE this!
Thanks for your time.
JW
Please provide as much information; I wish more users looking for help that would make!
Unfortunately, I don't have a clear solution for the specific problem you see. The video link you provided works great for me with Flash Player 11.2 on Firefox on Windows XP - SP3 and Windows 7 12.
What I would try if it's the same for me:
- Try a new installation by following the instructions in http://forums.adobe.com/thread/928315
- to reinstall them using tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#ins offline installers
- If the above does not improve the situation, I would try if a graphics driver update changes anything; See http://forums.adobe.com/thread/945765 (but I'm sure you know how to update the drivers, with your background)
- If everything fails, I would try a system restore to a date prior to the update of Flash Player; all PS files are in the C:\Windows\... records, so he should be back completely on the previous working version
Or you could try a manual installation from a previous version of
- using uninstaller http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
- then download and install the archived Flash Player appropriate to http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
PS in regards to the installers archived, you may need to disconnect from the Internet during the installation. Some of the newer installers go and check the availability of new versions and refuse to continue if they find one.
P.P.S. You can permanently disable auto-update using a mms.cfg file; See http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
Most of the information in this guide to the Director must make reference to the new silent update that are substantive, but it also works on the previous update of the FP.
-
Several Kernel Panic after upgrade from Sierra
Hi guys,.
I had on my MacBook 2016 multiple kernel panic after upgrade to Sierra, happens every time I open it or waking from sleep:
Anonymous UUID: 8B8CA0BE-7043-8C53-656A-BA768C67E094
Sat Sep 24 08:14:08 2016
Panic report *.
panic (cpu 0 0xffffff7f96cac415 appellant): "reinit@26=PCIeCfgRdFailed{LnkSt=FFFFFFFF,DevSt=FFFFFFFF,VID=FFFF,DID=FFFF,STS_ CMD=FFFFFFFF,BAR0=FFFFFFFF,BAR1=FFFFFFFF,US=FFFF"@/BuildRoot/Library/Caches/com apple.xbs/Sources/AirPortDriverBrcm4360/AirPortDriverBrcm4360-1100.37.1.16/src/s hared. / macosx_osl.cpp:1999.
Backtrace (CPU 0), frame: return address
0xffffff9121f735c0: 0xffffff80154f748c
0xffffff9121f73640: 0xffffff7f96cac415
0xffffff9121f736c0: 0xffffff7f96cb15c1
0xffffff9121f73790: 0xffffff7f96cab6ca
0xffffff9121f737d0: 0xffffff7f96f87720
0xffffff9121f73820: 0xffffff7f96f7fe95
0xffffff9121f73860: 0xffffff7f96d6c6b8
0xffffff9121f73870: 0xffffff7f96d66d25
0xffffff9121f738b0: 0xffffff7f96d66994
0xffffff9121f73930: 0xffffff7f96cb0fa2
0xffffff9121f73a30: 0xffffff7f96cb15b7
0xffffff9121f73b00: 0xffffff7f96cab6ca
0xffffff9121f73b40: 0xffffff7f96f87670
0xffffff9121f73b90: 0xffffff7f96d584b2
0xffffff9121f73bd0: 0xffffff7f96e02928
0xffffff9121f73c00: 0xffffff7f96cf6f2b
0xffffff9121f73c30: 0xffffff7f96f4824f
0xffffff9121f73c60: 0xffffff7f96dd393f
0xffffff9121f73cb0: 0xffffff7f96cbbfb8
0xffffff9121f73d80: 0xffffff7f96cb8196
0xffffff9121f73db0: 0xffffff8015ac00ba
0xffffff9121f73e20: 0xffffff7f96cbb824
0xffffff9121f73e60: 0xffffff8015aa714b
0xffffff9121f73ee0: 0xffffff8015aa6efa
0xffffff9121f73f00: 0xffffff801552edea
0xffffff9121f73fb0: 0xffffff80154a6af7
Extensions of core in backtrace:
com.apple.driver.AirPort.Brcm4360 (1100.37.1a16) [C7639630 - B474 - 3DAD - BD3E - 8BEE4D0 D1706]@0xffffff7f96c9c000-> 0xffffff7f97458fff]
dependency: com.apple.driver.corecapture (1.0.4) [FEB510C7-BFC6-3721-8143-476E4EB62788] @ fff7f96b72000 0xfff
dependency: com.apple.driver.mDNSOffloadUserClient (1.0.1b8) [DFE569DA-088F-3773 - 95A 7 - 1C98F4E 80CEF]@0xffffff7f96ba4000
dependency: com.apple.iokit.IO80211Family (1200.12.2) [11F0AC73-496B-349F-81BE-3D1BE4C45234] @ 0xffffff7f96bac000
dependency: com.apple.iokit.IOPCIFamily (2.9) [731443D8-78D5-30C8-939A-1ED3E857CA22] @ 7f95d32000 0xffffff
dependency: (3.2) com.apple.iokit.IONetworkingFamily [6326DB88-5330-3F0C-91F6-D478AB5E7503] @0 xffffff7f96265000
Corresponding to the current thread BSD process name: kernel_task
Mac OS version:
A 16, 323
Kernel version:
16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Slide kernel: 0 x 0000000015200000
Text of core base: 0xffffff8015400000
Text __HIB base: 0xffffff8015300000
Name of system model: MacBook9, 1 (Mac-9AE82516C7C6B903)
Availability of the system in nanoseconds: 43351242685
last load kext to 6254093706: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f97663000 size 45056)
kexts responsible:
com Apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 110.23.7
com.apple.driver.ApplePlatformEnabler 2.7.0d0
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleGraphicsDevicePolicy 3.13.60
com.apple.driver.AppleUpstreamUserClient 3.6.4
com.apple.driver.AppleHDAHardwareConfigDriver 276.26
com.apple.driver.AppleHDA 276.26
com.apple.driver.AppleIntelPCHPMC 1.1
com.apple.driver.AppleIntelSKLGraphics 10.1.8
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 5.0.0f18
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.8
com.apple.driver.AppleSMCLMU 208
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleCameraInterface 5.57.0
com.apple.driver.AppleFIVRDriver 4.1.0
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleMuxControl 3.13.60
com.apple.driver.AppleBacklight 170.9.10
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.driver.CoreStorageFsck 540
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 39
com Apple.filesystems.HFS.kext 366.1.1
com.apple.driver.AppleTopCaseHIDEventDriver 102
com.apple.driver.AirPort.Brcm4360 1100.37.1a16
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 5.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 5.0
com.apple.driver.AppleAPIC 1.7
com Apple.NKE.applicationfirewall 171
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com Apple.kext.Triggers 1.0
com.apple.driver.DspFuncLib 276.26
com.apple.kext.OSvKernDSPLib 525
com.apple.iokit.IOBluetoothHostControllerUARTTransport 5.0.0f18
com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18
com.apple.driver.AppleHDAController 276.26
com.apple.iokit.IOHDAFamily 276.26
com.apple.iokit.IOAudioFamily 205.11
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 152
com.apple.iokit.IOBluetoothFamily 5.0.0f18
com.apple.AppleGraphicsDeviceControl 3.13.60
com.apple.iokit.IOAcceleratorFamily2 288.13
com.apple.driver.AppleSMBusPCI 1.0.14d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 6.0.0d8
com.apple.driver.AppleIntelLpssUARTv1 3.0.60
com.apple.driver.AppleIntelLpssUARTCommon 3.0.60
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleGraphicsControl 3.13.60
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIArchitectureModelFamily 394
com.apple.driver.CoreStorage 540
com.apple.driver.AppleXsanScheme 3
com Apple.filesystems.HFS.Encodings.kext 1
com.apple.driver.AppleHIDKeyboard 197
com.apple.driver.AppleMultitouchDriver 367,6
com.apple.driver.AppleInputDeviceSupport 76.1
com.apple.driver.AppleHSSPIHIDDriver 49
com.apple.driver.AppleHSSPISupport 49
com.apple.driver.AppleIntelLpssSpiController 3.0.60
com.apple.iokit.IO80211Family 1200.12.2
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com Apple.Driver.corecapture 1.0.4
com.apple.iokit.IONVMeFamily 2.1.0
com.apple.driver.AppleHPM 3.0.8
com.apple.iokit.IOThunderboltFamily 6.2.1
com.apple.driver.AppleIntelLpssI2CController 3.0.60
com.apple.driver.AppleIntelLpssDmac 3.0.60
com.apple.driver.AppleIntelLpssI2C 3.0.60
com.apple.driver.AppleIntelLpssGspi 3.0.60
com.apple.driver.usb.AppleUSBXHCIPCI 1.1
com.apple.driver.usb.AppleUSBXHCI 1.1
com.apple.driver.usb.AppleUSBHostPacketFilter 1.0
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.1
com.apple.driver.AppleEFINVRAM 2.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.driver.AppleBusPowerController 1.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 444
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 5.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
System profile:
Bluetooth: Version 5.0.0f18, 3 services, 27 aircraft, 1 incoming serial ports
Memory module: DIMM0/0 BANK, 4 GB, LPDDR3, 1867 MHz, 0x80CE, 0x4B33514634463430424D2D41474346202020
Memory module: DIMM0/1 BANK, 4 GB, LPDDR3, 1867 MHz, 0x80CE, 0x4B33514634463430424D2D41474346202020
USB device: USB 3.0 Bus
Crush Bus:
Model: MacBook9, 1, MB91.0154.B07 BootROM, 2 processors, Intel Core m5, 1.2 GHz, 8 GB, MSC 2.35f102
Graphics card: Intel HD Graphics 515, 515, integrated Intel HD graphics card
Network service: Wi - Fi, AirPort, en0
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 158), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)
Hope someone can help with this,
You are not alone in this. I had three panic the kernel after upgrade a MBP to Sierra 2015 - could not resolve it, then I returned to El Capitan.
-
Problem of LTE connectivity after upgrade to iOS 10-SE
Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.
I think you have the same problem described here:
After briefly losing service, iPhone will fail to connect to the cellular network until you restart
-
After upgrade to 25.0 FF (office), google search results has not pointed out any fat?
IE8 and Chrome NOT cela. Re-checked parameters and STRESSED the LINKS checked.
(I also did a RESET and no change)
_______
Win XP SP3
Dell Dimension 4600 1.2 G RAMMany issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
-
HP Pavilion p6210y: Office flashing after upgrade Windows 10
I have a flashing desktop (goes black and office) after upgrade to Windows 10. Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.
I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.
After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.
So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.
So, I rolled back to Windows 7 new.
I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.
Information about my machine:
HP Pavilion p6210y
Windows 7 Home Premium, 64-bit
Video card: NVIDIA GEForce 9100
All the suggestions/help will be very appreciated.
The only thing that solved the issue is reset my machine while keeping my personal files.
I've never understood what really caused it.
Thus, after the upgrade when the screen is flashing, I have reset the PC.
-
Firefox crashes at the start even in safe mode after upgrade to version 7.0.1
Firefox crashes on startup after upgrade to version 7.0.1
It hangs at the start even in safe mode.
I tried a complete uninstall and reinstall, but choose to keep all my settings (e.g. bookmarks) etc that I don't want to lose my favorites.
Your crashreport is
https://crash-stats.Mozilla.com/report/index/BP-24b848e4-7d2a-4cf1-B0B0-31ccd2111021
Report of Crash Firefox 7.0.1 [@ mozcomp.dll@0xab51]
Crash start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO
See Bug 680927 for more information
The problem likely is the use of some software Oracle etc., the Oracle Developer being aware of the problem and working on a fix. Meanwhile, there is a hack for registration as a potential solution, or the simpler solution of temporary demotion to firefox 3.6.23. -
Reader SuperDrive does not burn after upgrade of el capitan
Almost immediately after upgrading a mac mini end of 2014 to el capitan (10.11.2), the superdrive has lost his ability to write DVD. It is recognized by the system and can read DVDs fine, but any attempt to burn files or an ISO image on a disc breaks down.
The superdrive even happily burn on the same media on other macs in Yosemite (I checked several times), but he stubbornly refuses to do it on el capitan. The same mac mini was happily burn DVDs on the same media with the same superdrive on Yosemite, just before the upgrade to 10.11.2.
Now, with el capitan, attempts to burn ISO images fail with the message:
"Error burn image to disc: the disc can't be burned; It might be incompatible with this disc drive. Please, try a different brand of disc, or try burning at a slower speed. »
Burn files fail with the message:
"The disc can't be burned because the device failed to calibrate the power level of laser for this media."
Any ideas on how to solve this problem would be appreciated.
Reader SuperDrive material report:
OPTIARC DVD RW AD - 5630 HAS:
Firmware revision: 1CHQ
Interconnection: USB
Burn support: Yes (Apple shipping Drive)
Cache: 2048 KB
Read DVD: Yes
Write: CD - R, - RW
Write: DVD - R, -r DL, - RW, + R, + R DL, + RW
Write strategies: CD - TAO, SAO - CD, CD - Raw, DVD - DAO
Media:
Type: DVD - R
ID: CMC MAG AM3
Vacuum: Yes
Erasable: No.
Replaceable: Yes
Editable: Yes
Write speed: 2 x, 4 x, 6 x, 8 x
Try these in order to test your system after each see if it is back to normal:
1. a. reset the PRAM and NVRAM on your Mac.
b. Macs with Intel processors: reset of the controller (SMC) system management
2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:
HD recovery start: restart the computer and after the buzzer, press on and press and hold the
COMMAND and R keys until it appears the Utilities menu screen.
3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.
When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it
back from Macintosh HD entry of the list on the left. Click first aid button in the toolbar. Wait for the operation
ends, then quit disk utility and back to the main menu.
4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.
Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.
-
Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time
After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).
New value pack installation has not been successful.
Moreover, after upgrading the drive to DVD from Toshiba is default, too.
Who can help?I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.
When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.
As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.
DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.
As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.
Bye and I hope that you report your experiences with the Vista upgrade again.
-
Windows 7 validation after upgrade of pc issues.
Recently updated my card motherboard and CPU. Today I got black desktop with the message "this copy of windows is not genuine". The automated phone activation I tried, and I don't remember exactly what he said, but it failed when I said that the OS is on 2 machines. I have the Home Premium version of 3 license, so I do not understand this. None of my PC comes with windows and I am running 7 Home Premium 64-bit.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - FK9BM - 4MX4P-XTDKQ
The Windows Product Key hash: AwF7h2RZ/xmguMhLEwcDTOOOubM =
Windows product ID: 00359-113-5586083-85419
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {72B47084-BA6D-482C-8808-7CB4F4886F28} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Users\Kendal\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{72B47084-BA6D-482C-8808-7CB4F4886F28} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-XTDKQ 00359-113-5586083-85419 5 S-1-5-21-92601314-3113576432-2605183665 to be filled by O.E.M. power O.E.M. American Megatrends Inc.. P1.80 20131119000000.000000 + 0004FE63807018400F2 0409 0409 Central Standard Time(GMT-06:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-113-558608-00-1033-7601.0000-0852014
Installation ID: 017670620554341133559820782373022481834052033564059144
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: XTDKQ
License status: Notification
Reason for the notification: 0xC004F00F.
Remaining Windows rearm count: 2
Trust time: 27/03/2014 12:31:38 AMWindows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 1:20:2014 00:20
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: MgAAAAEABAABAAEAAAACAAAAAQABAAEAln0mUUxLpibu yZKVAamBSQpHDa0WZo/8 plusActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
ALASKA APIC HAS M I
FACP ALASKA A M I
HPET ALASKA A M I
ALASKA MCFG A M I
FPDT ALASKA A M I
AAFT ALASKA OEMAAFT
SSDT AMD BANTRY
SSDT AMD BANTRY
ARCT AMD BANTRY
SSDT AMD BANTRYYou should try the activation of the phone and talk to someone directly about your situation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usDirect activation number: (888) 725-1047
1-800-936-5700
Please note that the Windows 7 Home Premium Family Pack upgrade for 3 PC is an upgrade license.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
PSC 2510i AIO: NOT more than scan after upgrade to Snow Leopard
Hello
After upgrading to Snow Leopard, I can't find my scan feature.
I tried to different paths:
1. install such as proposed through the Apple software update: no scanner not found, printing is working A-OK
2. install HP_Installer_PSC2500_v9.7.dmg: does not work, gives errors.
Removed all and re-installed the Apple / drivers HP through software update
I've tested the HW, works fine, can sweep on the machine itself, but it is not a solution.
I am enough fan of this machine, 100% over the years in the home network.
Does anyone have a suggestion?
Appreciate your help :-)
Thank you!
Hey the HP team.
Just got an update of the printer HP by Apple and yes I can see the PSC2510i
And Scan.It crashed a few times, but I guess that the reports will reach the development team.
I am happy!
I can disconnect and stop the Windows laptop...AND! not even an additional feature!
Multiples of scanning.
It distinguises different objects, makes life much easier.Thanks again
MacBurdy
-
After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.
PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?
Rune
One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.
A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem. Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.
-
Additional configuration after upgrade R12
Hello Experts,
We are currently in the process of updating 11i.5.10.2 to R12.1.3.
We have the GL, AR and module of the R12 upgrade projects. The question is simple, after upgrade R12 do we need to do any additional setup to the subsidiary ledger or journal?
If the answer is Yes, then pls guide me for the same thing.
Thank you
Atul
Hi Atul,
In addition to the above, please also visit:
Below notes for GL:
R12 upgrade: changes to wait in R12 from 11i (Doc ID 1443965.1) version
R12 upgrade: Accounting Setup Manager Update pre diagnosis report (Doc ID 961742.1)
Thank you &
Best regards
-
Responsive support in the context of HTML5 broken after upgrade to 11.03.268
Responsive HTML5 in the context help links using robohelp_csh.js and the following function is no longer work after upgrade to 11.0.3.
The correct html page is displayed. Contents and index are displayed but do not respond and you can not navigate to other pages.
var HH_DISPLAY_TOPIC = 0;
var HH_DISPLAY_TOC = 1;
var HH_DISPLAY_INDEX = 2;
var HH_DISPLAY_SEARCH = 3;
var HH_HELP_CONTEXT = 15;
function RH_ShowHelp (a_pszHelpFile, uCommand, hParent, dwData)
{
This function is supported WebHelp
var strHelpPath = a_pszHelpFile;
var strWnd = "";
Var NPOS = a_pszHelpFile.indexOf(">");
If (NPO! = - 1).
{
strHelpPath = a_pszHelpFile.substring (0, NPOS);
strWnd = a_pszHelpFile.substring (nPos + 1);
}
RH_ShowWebHelp (hParent, strHelpPath, strWnd, uCommand, dwData);
}
function RH_ShowWebHelp (hParent, strHelpPath, strWnd, uCommand, dwData)
{
hParent never used.
ShowWebHelp (strHelpPath, strWnd, uCommand, dwData);
}
function ShowWebHelp (strWnd, uCommand, strHelpPath, nMapId)
{
var a_pszHelpFile = "";
If (uCommand is HH_HELP_CONTEXT)
{
a_pszHelpFile = strHelpPath + '? rhcsh = 1 & rhmapno = "+ nMapId +" & rhnewwnd = 0 ";
Note: On IE, specifying the Help window causes an intermediate empty window open.
that fails to close. To avoid that we don't bother specifying the window more.If {(strWnd)
a_pszHelpFile += ' & rhwnd = ' + strWnd;
//}
}
If (a_pszHelpFile)
{
var leftPosition, topPosition, height, width;width = window.screen.width * 0.8;
height = window.screen.height * 0.8;
leftPosition = window.screen.width * 0.1;
topPosition = window.screen.height * 0.1;"" var sParam = "left =" + leftPosition + ", top =" + topPosition + ", width =" + width + ", height =" + height + ", resizable = yes";
Window.Open ("__webCshStub", a_pszHelpFile, sParam);
}
}I don't remember all the other reports of this problem. Have you reported it to Adobe? Adobe - feature request/Bug Report Form
Edit: Willam Site lists the hotfixes and patches. There is a fix post - 11.0.3, potentially, you can try.
Patches and updates RoboHelp update | WvanWeelden.eu
http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38
Maybe you are looking for
-
Best way to create a variation of a FCP project
I have a two hour video that I created in Final Cut 6. It's a pretty complex video, with lots of movement today, I want to make a shorter version of the same video, without altering or modifying the original video. I'm trying to understand the best w
-
How can I stop the download of images from the site?
This is the first time I installed Firefox for Android. Don't see how I can block images from the web page and just take the content of the text. Thanks for your time.
-
LaserJet M3035: Missing home LJ M3035 tab
I need to switch to admin mode to enter the new IP address for the new direct jet but Home tab does not appear on the display. Can someone tell me how to access this screen? I think it's in a certain type of security mode? I tried a cold reboot, but
-
Tried everything? Even people bt could not get it. Laptop about 4 years. External WiFi would get me wpa2 if so which one is the best?
-
Network - I can not connect to Windows Live Messenger. I get the error 80072efd.
Whenever I get my login and my password it won't let me connect. He said that there could be a problem with my internet connection, but I checked and cannot see no problem connecting. help please?