no response from the keyboard
I have a Compac Presario SR2038X top pc office and plugged into my plasma 50 '' tv via a hdmi cable to use graphics sapphire Radeon 4550 HD on tv. Everything started, but when he asked my password to connect I have no response from my key board. My wireless mouse seems to work very well and the resolution is good too. It all started as it has always done but unable to enter my password. If anyone can help...
Wall-e, I suggest to reinstall software or a driver for the keyboard. Sometimes a small problem will occur without known reason.
Tags: HP Desktops
Similar Questions
-
No response from the keyboard on Equium M40X
Hi all
Posted before on this problem, just mounted a new keyboard, but getting no response from it, the luminous numbers lock is on, but nothing works, it is a new keyboard, my old one was doing the same thing, reinstalled the system using a usb keyboard but still the same, no response from the keyboard, any ideas?
Hello
Connect the flat keyboard cable properly to the motherboard?
Make sure that the keyboard cable is firmly connected to the system board.
If the internal keyboard has been correctly connected, so I think there must be something wrong on the motherboard.I think detailed diagnosis can be done by a technician with experience much more as a common user like you and me.
-
Original title: Vista pc keeps freezing.
Hello
My pc keeps freezing, as in no response of the keyboard or mouse, all pages and windows stop loading etc.I have to hold the power button to re boot.After restarting, it might work correctly for hours or only 2 minutes!Seems to be ok in safe mode.Any ideas?Hi jamesbil,
Thank you for keeping us posted.
Method-
I wish that you uninstall Service Pack 2, and then repeat the repair facility.
See the article-
How to uninstall Windows Vista service packs as a troubleshooting step
http://support.Microsoft.com/kb/948537
Note: A system restore will undo the changes on the computer. Earlier all applied settings will be lost.
We know if you need help.
Thank you.
-
No response from the keyboard and mouse to the Windows logon.
Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
Basically, my mouse and my keyboard do not respond before Windows logon.
Opening height of session does not either.
The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
Processor: Intel (r) Celeron (r) CPU
900 to 2.20 GHz 2.19 GhzMy mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
I need help as SOON as possible so that I can get back to work.-Albert
This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
1. get a disk external 2.5 "in a USB case.
2. connect it to the PC.
3. set your BIOS so that it uses the DVD drive as its primary boot device.
4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
5. press a button if you are prompted to start from the DVD.
6. When prompted, select "Safe Mode Command Prompt".
7. connect as administrator if you are prompted.
8. Select repair when prompted.
9. Select command prompt.
10. save your files or folders on the external USB drive (or a flash drive).
If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.
-
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
Cannot connect iPhone 7 more to iTunes because an invalid response from the device
I tried to sync my phone to iTunes and I get an error message stating "invalid response from the device. I tried to remove the password, and it still doesn't work. I also tried using a new USB cord. I'm doing something wrong? I can't sync my music or ringtones. Will there be an update to iOS 10 soon to solve this problem? I am extremely disappointed that I can not connect my new phone!
You use iTunes version 12.5?
-
No Satellite Pro 6100 no response from the screen
Can anyone help?
My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)
Can anyone help?
Hi Simon
Disconnect all cables from the laptop and remove the battery.
Wait a moment more (20 min) and reconnect the battery and the AC adapter.
Then check if the laptop turns on and if the display works fineGood luck
-
An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?
It is one of the many problems that occur on my mac.
Update of OS X El Capitan 10.11.4?
1. backup Mac.
2. install 10.11.4 combo update.
https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US
-
NB200-h-13 - no response from the DNS server and gateway
Hello
I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAYThe connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.
Hi abk55,
What program you receive this error message?
Have you tried another browser, for example Firefox or Opera?I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
Also, try to disable the filtering of MAC addresses and use another encryption. -
Satellite Pro P100: Wlan with no response from the server proxy C-27
I have a laptop model Satellete Pro P100 and tries to connect to a wireless router.
I was able to connect to it over the past four months.Last week, I connected to a wired network and now he refuses to re - connect to my home wireless network. He acknowledges that I am connected but connectivity doctor says "there is no response from the server proxy (c-27).
A friend in the House is able to connect to the internet with their computer without problem.
I have tried everything I know, but need help please. Thank youHello
Have you checked in the properties of Wlan settings and the TCP/IP properties?
Please check if the options: IP automatically get an address and get server address DNS are automatically set correctly. -
Hello
My 3 year old hp pavilion x 2 removable 2 in 1 touch screen works only if detached from the keyboard. It has been for the last couple momths stop without warning whenever it was moved slightly while attached to the keyboard. Now it doesn't work at all and stops as soon as I connect it to the keyboard. Everything else works fine. Any help is appreciated. Thank you.
Pat
Hello @pmm25,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post about the problem of keyboard and wanted to help you!
Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.htmlPlease let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
I have an application that sends emails when running. Off late a user when he tries to send a mail it receives the following error message...
"System.Net.Mail.SmtpException: unavailable mailbox." "The response from the server is: 5.7.1 error: content rejected '...
Note that this happens when he tries to send mail to itself and not otherwise. Can someone here on which could mean the error? Thanks in advance... :))
Error code is generated in the back-end.
'System.Net.Mail.
to System.Net.Mail.
to System.Net.Mail.
to System.Net.Mail.
to System.Net.ClosableStream.
to System.Net.Mail.MailWriter.
to System.Net.Mail.SmtpClient.
Hi guys,.
Thanks for the reply!
I contacted my sources by taking care of the servers and realized that the user was an id in which the address of the server was not set up with our servers in domain. He used to connect to our servers using the VPN client. This is why he could not send mails to id field not (in this case itself).
-
My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.
I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.
I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.
I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n
I need step by step instructions on this Yes please treat me like a fool!
Thank you
Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)
After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!
-
Can someone please tell me, if it's possible on Windows Mail (not Outlook) how we implemented an automated response from the Office?
Can someone please tell me, if it's possible on Windows Mail (not Outlook) how we implemented an automated response from the Office?
Here are the instructions:
http://email.about.com/od/windowsmailtips/Qt/Vacation_Auto_Response_in_Windows_Mail_or_Outlook_Express.htmDon't forget: your computer must be turned on 24/7.
t-4-2
-
No response from the seller ID number of package support
Hi all
Anyone fron blackberry can help me on this problem.
On March 30, I applied for the support of the seller to change the package ID.
March 31, I got the answer of the global team blackberry on the change of package IDS.
On April 2, I sent the email to the world of blackberry team to make sure that I want to change my package ID.
But 4 days no past, no response from the world of blackberry team.
The email said they need of 24-48 hours for response. This means that the time of day? No weekend?
Thank you
brad_qqq
Hi bvanengelen,
Thanks for the information. The world of blackberry team have sent e-mail to me. They have already taken my package ID.
Thank you
Liang
Maybe you are looking for
-
Audio random are to be duplicated and I don't know why. some songs are duplicated 2 or 3 times, but some do 5 or 6 times. very very strange. I'm not sync-ing or via vcast, connect only usb load mode and endearing when it is connected to my pc. any he
-
I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error: STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC) ACPI.sys - address F73B9D66 base at
-
Scanner printer Envy 4520: don't go back not envy 4520 holder
Hi have a HP Envy 4520. The arms of paper comes out but dosent auotmaticly back to the printer after that I have remove the paper?
-
* Original title: Firewall Windows 7 problem Even after install all windows updates continues to ask me for permission allow through firewall application each time. I mean whenever I run a network based App. can someone tell me what is the problem it
-
Detect what his selection ListStyleButtonField
Hi... I'm trying to use ListStyleButtonField (Pentecost cells) for my application... but has a problem its because I put 10 ListStyleButtonField in the screen, so when the user ' click on ' for example in line 5, I loop and try to identify what his c