No Satellite A200-27R no response when you press power button / stop

Similar Questions

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Reset button when you press another button

  I just started using labview to work and need help with my last piece of code.  I am writing a program to control an instrument which requires a signal 'halt' and a 'reset '.  When the instrument is stopped (for reasons of error that is generated a continuous stop signal) how to reset the device is emitting a signal of 'reset '.

  The stop signal is triggered by a Boolean button or a mistake from an entry DAQmx, the reset signal is triggered by a Boolean button in a structure of cases this is true when the stop signal is output.

  My question is when you press the button reset (correction of a mistake), I want button discharge to be depressed, otherwise my program would be stuck in a negative loop (IE I have reset the device but the stop button is always in a hurry).  I can't press two buttons at the same time!

  How do I link these?

  Thank you!

  Radio buttons do all the work for you, if you don't mind seen Reset selected until you actually hit stop.

  

• When you press the button to update on ipad, it says cannot connect to store

  When you press the button to update on ipad, it says cannot connect to store

  Contact Apple for problems with their equipment and services. http://www.Apple.com/

• I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why.

  I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why / tell us step by step what we should do?

  OK, I re-read your question. It's actually expected behavior. The user must manually send the email.

  If you want it to be a silent process, then you must either install a script on the local computer of the user who will do this, or use any email but something as a service web to which you directly submit the form data.

• drop off the list when you press the button

  Hello

  I use Apex4.2

  How can I view drop-down list when you press the button?

  
  

  environment or is it a solution to create the same interface as the apex dev

  Thank you

  Probably a lot of ways to do this, but I would just give the combo a hidden CSS class.

  Put this in your page inline CSS:

  . Hidden {}

  visibility: hidden;

  }

  and then on your issue in the HTML drop-down list box form element classes simply add this: hidden

  Then, create a dynamic action on click of a button using JavaScript to remove this class:

  $("#P10_YOUR_ITEM").removeClass ("hidden");

  See this example: http://apex.oracle.com/pls/apex/f?p=32581:2

  username: guest

  PW: app_1000

  Click the Show Drop Down List button and the menu drop-down element is displayed.

• Stop the updating of the region (report) when you press the button

  Hello
  
  I created a report region, using the select statement:
  

  select * from TABLE(CAST(JCMS_MERGE_BATCHES_PKG.show_merged_batches_fn('M29||0') AS jcms_rep_batch_type))

  Is there a way to stop this submission report when you press a button on my page?
  
  The reason for this requirement is that my report contains checkboxes for each returned row. The default value for the checkbox control is CHECKED when the report is refreshed. However, I would like users to uncheck some lines in the report, click a button and have a treatment performed on ONLY the checked lines. My page almost works, but because the report is refreshing, after I completed my treatment, the report is back with all lines in the selection again.
  
  Thank you very much
  
  Paul

  I think that your condition is similar to the following:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:219

  However, it is not trivial.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Thunderbird will synchronize automatically unsubscribed all Gmail mail when you press the button "a".

  I will sync not all messages in Gmail as it is simply a duplicate of all my other files.

  However, if you accidentally hit the 'a' on the keyboard while in the folder view, Thunderbird automatically opens the folder all the messages in Gmail and begins the download/sync folder. Mine is so boring about 20 GB.

  I have to close TB, open it, and then quickly unsubscribe to record all messages in Gmail, then shut down, remove the msf file and then I can return to TB for her to work normally.

  Is there a solution to this? How can I stop the key 'a' to remove case opening?

  Thanks for the help

  Paul

  You check when you press 'a' and this is interpreted as moving all messages in gmail.

  I suggest that you look at the KeyConfig add-in that allows you to specify (and turn off!) keyboard shortcuts.

  http://KB.mozillazine.org/Keyconfig_extension:_Thunderbird

• Dashboard does not appear when you press the button on the dashboard

  I just got my board replaced on my MacBook Pro.  Before it was replaced, when I pressed the button with the dashboard icon (F4), it is toggled between my widgets that have been opened in the dashboard and the window, in that I was working.  Now, after you set up the Mission control to show the dashboard with the key to the dashboard, I see the dock (which I choose to hide) and all my apps icons.  I then have to click on the application of the dashboard to show my widgets.  How to reset the key so that it only shows the widgets when I press on it?

  Try going to system preferences > keyboard and check the box use F1, F2,... etc as Standard keys.

• is it possible to put in place a control of the event in labview to create a string indicator when you press a button

  I'm trying to implement a user interface where an operator can set the column headers for a report and I use indicators of the string as the placement for the text in the column headers.  Given that many of them will have experience with Labview, I was hoping to set a button with the ability to add or possible delete a string indicator when you press.  Is it possible to set up an event like this?

  You cannot create an indicator of the string, but you can change the visibility of the existing volumes.

  For example, you can display an indicator of the string, giving the impression that his creating.

  /Y

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• Change the State of the button when you press another button

  Hi all

  I have a simple enough question, but just does not know how I can do this... I'm trying to switch between the two types of waveforms (sine and square) on a graph using buttons and a box structure.

  I currently have two buttons A and B. When I press A, it turns into real and displays the waveform 1. When I press B, B turns into real and displays the waveform 2. However, when B is true, I still have a permit as true (hurry)

  I can't figure out how to change the status of a return to false when you press B and vice versa.

  I am fairly new to Labview so if anyone can refer to a position where it is already the answer or point to the right direction, that would be appreciated

  Thank you

  Rather than clutter up the code with the event hidden cases (!), controls (!), value properties (!) and variable (!) local (as suggested above but not recommended at all!) In addition, it does not even work correctly!), all you need is a control radiobutton that allows also to "no selection". See attached (LabVIEW 2013). You could also add a third Boolean value for the sine wave and not dismiss "no selection" to make the code even more if auto-documentent.

  I made the transparent container radiobutton to match your existing style.

  

• Open a tab, when you press a button

  Hi all

  I have trouble getting my VI to open a specific tab page when I press a button.

  I found the following trick in the forum:

  Use the nodes property.  First, get the page references.  In this table, select the specific page reference.  Then write the Page Enabled in the Enabled property of the Page. After that, write the page value in a local variable (if the tab is a control) or write the value directly in the terminal if the tab is an indicator.  Close references.

  What I managed to do so far is set to the Enabled property of the Page. However I can't seem to find any sort of "writes" the value of a page

  Could you help me with this?

  Thank you

  Nick

  While that will give you lots of toys to play with, it seems to me they're just complicated things here...

  Take a look at this excerpt:

  

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• Satellite M100 - screen turns white when you press the bottom of the frame of the screen

  Hello

  I have a strange problem with my Satellite M100.

  When to start the laptop, the screen is totally blank.
  When hand press to the middle part of the bottom of the frame of the screen (black plastic frame) the display looks fine, as long as I am pressing on it.
  When let pressing, the screen becomes funny,

  Also noticed, when top screen downstairs, appears blurry white screen.
  But the screen is OK as long as I pressed the plastic at the bottom of the screen frame.

  Any idea would be greatly appreciated, want to confirm which part is faulty, so I can avoid replacing the whole LCD.

  Thanks in advance.

  Hello

  For as far as I know the small part called FL inverter is hidden behind the frame s screen.
  Maybe it s something with this part. Who knows it would be necessary to test this
  On the other hand, one cannot rule out a display problem

  You see, it's hard to say, really a malfunction which part
  Therefore, it would be advisable to contact a technician for laptop

  See you soon