Satellite A200 screen remains black when you try to start

Hi all

My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

Thanks in advance,
MrRoy

EDIT:
After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

So, if this happens to you:
1. turn off your computer.
2. wait about 30 minutes.
3. start in safe mode
4. close using istead of now off button power button closure.

It should work.

Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

Because I see that the processor does not work when I try start it.

So let's say that this is the case, would it be the symptoms of my computer?
And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

But now, my computer is simply not starting, as I said in my previous post.

Thanks in advance,
MrRoy

-----

Note: The Edit button was not there so I had to double post :/

Tags: Toshiba

Similar Questions

  • Re: Satellite L350 - screen goes black when I try to play

    I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.

    My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.

    Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...

    Any help would be appreciated

    Hello

    Which disc you used to reinstall Windows?

    Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.

    In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  • screen goes black when you try to Watch youtube videos

    Hi, can anyone help. I can't watch the videos on youtube, the screen goes black and the computer freezers. I have a HP DV6, Windows 7

    Mattew wrote:

    Hello

    Still does not, now, the video and sound will play for about 2 seconds then the screen turns white with vertical stripes. He also freezers the computer completely

    Hi, thanks for your help, but this is how I fixed it. Hope this helps others

    However, to do this: go to http://www.adobe.com/software/flash and do a RIGHT CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".

    It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!

  • Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

    The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

    Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • screen goes black when you use windows live mail

    In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • Photoshop: image becomes black when you try to select with inclusive

    image becomes black when you try to select with inclusive

    (edited)

    Powering the OpenGL in the Performance preference and restarting Photoshop have no bearing on the question?

  • When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

    When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

    This has happened

    Just once or twice

    == I thought that I had left Firefox and he was new.

    I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

  • When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

    When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

    C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

    I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

    Any help?

    Hello

    Try the following steps:

    1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

    2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

    Original title: windows cannot find c:\windows\system32\control.exe

    Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

    Hello

    1. What is the brand and model of the computer?

    2. What is the security software installed on the computer?

    3. have you made changes on the computer recently?

    Method 1.

    Start the computer in safe mode and check.

    Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

    If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

    Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 2.

    I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

    Method 3.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    I hope this helps.

  • Only get a blinking cursor when you try to start after the installation of updates

    Original title: blinking cursor when you try to start

    After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

    Hello

    1 update you tried to install?

    Step 1:

    You can check out the following link and try the steps.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

    See the Windows updates are installed

    Step 3:

    If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

    a. to download updates from the Microsoft Download Center

    b. Enter the item number in the field search and download the same.

    c. double-click on the downloaded file.

    d. click on run and follow the wizard to install it.

    Hope this information is useful.

  • software unknown error (0x00000d) exception when you try to start olympus master 2 prog

    When you try to start olypus master 2 has got the message "the exception unknown exception soft ware (0x00000d) occurred in the application at location 0x01ooo94818.

    I also looked in the management of the comp & found the following:

    Log name: Application
    Source: Application error
    Date: 2010-08-26 10:43:37
    Event ID: 1000
    Task category: (100)
    Level: error
    Keywords: Classic
    User: n/a
    Computer: Admin-PC
    Description:
    Failing application OLYMPUS Master.exe, version 2.3.0.2, time stamp 0x4b0d15c5, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03824, exception 0xc015000f, offset error 0x0005b80a, process 0xd2c id code, start the application time 0x01cb450320f41867.
    The event XML:

     
       
        1000
        2
        100
        0 x 80000000000000
       
        53267
        Application
        Admin-PC
       
     
     
        OLYMPUS Master.exe
        2.3.0.2
        4b0d15c5
        ntdll.dll
        6.0.6002.18005
        49e03824
        c015000f
        0005b80a
        D2C
        01cb450320f41867
     

    Am not a comp expert so any ideas on how I can get this prog to start over?

    Tried to put in orig cd but even occurs.

    Thank you

    Hambman

    Hi Hamman1,

    1. were you able to open this application as soon as possible?

    Step 1

    Check the hard drive for bad sectors.
    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Step 2

    If the problem occurs, you might uninstall and reinstall the application to a different location.
    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Bindu R - Microsoft technical support.

  • When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'

    Original title: login as administrator WARNING

    When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'. It never happened to me before, and I can't launch the Simulator. I tried to create a different user account has administrator rights, and then reinstalling the Simulator in this account. It did not work. I don't know how to remove the windows updates and I can't return to my windows to a previous state. Flight Simulator start in "Safe Mode" is no help either. Can anyone give me any help would be greatly appreciated. Thank you in advance.

    Wonders will never cease! I also, lived the same issues with FS2004 and CFS3 which began some time in the past months. Located at KB3086255 was updated and deleted and everything seems to work again.

  • get the fatal error when you try to start Windows 7 Easy Transfer...

    get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

    Hello Jo,.

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

    Thank you for details on the issue.

    This problem may occur because of damaged or missing Windows files.

    I suggest you run the system file checker (SFC) and see if it helps.
    Reference:
    Use the System File Checker tool to repair missing or corrupted system files
    https://support.Microsoft.com/en-us/KB/929833

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Error 1068 when you try to start the WIA service after the installation of the W7 SP1

    Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

    SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

    Hello

    Method 1: Try to uninstall and reinstall Epson drivers and related software.

    Visit our articles to do the same below:
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

    Method 2: Also scan SFC (System File Checker) on the computer.
     http://support.Microsoft.com/kb/929833

    Hope this information helps.

  • Help - Photoshop Elements 8 crashes when you try to start multimedia

    Photoshop Elements 8 crashes when you try to start the Organizer. It is funny, from the editor of Photoshop is not a problem and works fine.

    I uninstalled the software and then installed again, but had no effect.

    What can I do?

    Nick

    Hold down the shift Organizer launch wjilst, and then click to create a new catalog, for example My Catalog2

    If the empty catalog open try to import multiple JPEG files and this will help to determine whether the original catalogue is defective.

Maybe you are looking for

  • Atikmdag pilot

    On a Pavilion a6763it (VISTA 64-bit) driver atikmdag (latest version available) is defective: it shuts down the system when using Phoenix or Firestorm viewers for sl.

  • Insert visa resource drop-down list

    So I get a lot of these examples in serial communication and they all have this Visa list resource name dropdown that allows me to choose from a list of serial ports. How do I do / insert one of them without simply copy and paste from other screws?

  • Adding external speakers to T232HL

    Can I add external speakers with my T232HL monitor.  Internal speakers in the monitor, but I would like an extra volume when listening to music.

  • The server does not support an SSL connection to a Hotmail account

    Original title: the server does not support The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  • Dell Optiplex GX620 complete drivers for Win 7

    Hello. I have a system Dell, Optiplex GX620 with Intel Pentium D Inside processor. Now I want to install Windows 7 on my system, but its pilots are difficult to find and download. Please tell me that from where I download its complete drivers.