No Signal Message

Similar Questions

• SONY BRAVIA 50 "no signal message for find analog channels

  I bougth a BRAVIA 50 "and everything has worked perfectly, but suddenly the TV sent no signal message can not find the signal of channel or something like that. I bougth TV on December 2012 and this 4 last January that happened. What?, because I could see 7 channels before that. I tried to reset the original settings and I read, but nothing seems to work for some tips. The other features work well. It's just the analog channels. I hope someone knows the solution. Thank you

  I bougth a BRAVIA 50 "and everything has worked perfectly, but suddenly the TV sent no signal message can not find the signal of channel or something like that. I bougth TV on December 2012 and this February 4 this year that happened. What?, because I could see 7 channels before that. I tried to reset the original settings and I read, but nothing seems to work for some tips. The other features work well. It's just the analog channels. I hope someone knows the solution. Thank you

• Recently, to make 'No Signal' message, after the new router

  I have a new Verizon Fios router, and since then my Apple TV does not work.  The TV keeps giving me the message "No Signal".  This could be a coincidence, and I really need a new HDMI cable?

  It is unlikely to be something to do with the router, but exactly the type of question that you get with a poor HDMI cable.

• Toshiba 55WL768 - slow change of channel SAT + no signal message

  Hello forum,.

  I need help because television 55wl768 responding really slow down usually when I change the channel.

  Often, I see the black channels with the message 'lack of signal', but there is.
  What can I do to solve my problem?

  Thank you very much.
  Pietro

  Hello

  Have you noticed that switching between channels or encrypted channels that is open and unencrypted?

  You use a SAT decoder or TV receiver internal?

  Your comments would be appreciated

• HP2311X LED monitor - no signal message

  Recently bought the HP 2311 x monitor and it works fine, until tonight.  Because of the duration of inactivity, the monitor goes to sleep;  usually, it doesn't take long to awaken, until tonight.  The display shows "no signal".  Check all cable connections and all are firmly intact; went ahead and unplugged and re plugged the cables, but always, the monitor says "no signal."  Finally, the only way to awaken the monitor is to unplug it from the power supply; but immediately, it displays the message "no signal" and goes to sleep.  Any assistance that you can provide is much appreciated.  Thank you very much!

  If no test doesn't work, then we know nothing.
  It may be a graphic of the pc, the pc, the monitor, a cable.
  You can test the monitor with another pc?
  A friend, a neighbour pc PC?

• computer does not start until montor no video signal message

  Dvd player unpluging and pluging into computer slave dvd powered down, that I went back to the orignial dvb car, won't boot upward and montor reads no video signal.

  The computer feeds also on orange with led op. running xp SP3

  Hi rdb 1949,.

  • Are you facing the question after you have connected the DVD player to the computer?

  This error message occurs generally if the faulty monitor or video card in the computer driver is damaged.

  I suggest that you start the computer to activate the VGA Mode or mode safe mode and check if the computer starts very well.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Also, connect another monitor to the computer and check if it works.

• No Signal message when the monitor is connected to the graphics card.

  Thus, after posting this problem on different forums, I was told that my power (300w) was too low for my Radeon HD 7570 I tried to install. After you install a 585w power supply, the problem is still happening.

  Model: HP Pavilion h8 - 1240 t

  OS: Windows 7 64-bit

  Error: Monitor says "no signal" when connected in the PCI slot where is the graphics card.

  Changes: this always happened, did not get a single card to run this stupid computer!

   

  The DVI cable is completely plugged the monitor into the PCI slot and the graphics card is fully in. The fans on the graphics cards spin but it is not detected at all. It does not appear in Device Manager.

  Data sheet:

  I7-2600 3.4GHz

  8 GB RAM

  Orion 585w PSU

  Radeon HD 7570 (it didn't come with the computer, otherwise it would work...)

  PEGATRON CORPORATION 2AD5 1.03 (I guess that's the motherboard)

  No. I went to Dell and downloaded THE drivers that ACTUALLY work. Computer restarted and everything works fine.

• How can I restore signal from my Mac Pro to my Viewsonic monitor, connected by VGA?

  I have a Pro Mac OSX version 10.7.5 running. Trendy top is a monitor 24 inch Viewsonic, the only monitor connected. Last week, everything was fine. I stopped him all night and the next morning, when I tried to start, there was no signal from the Mac to the screen.

  The screen displays a 'No Signal' message.

  I checked the entry on the monitor, and it is correctly set to PC.

  The computer starts normally. I can hear him do his thing.

  The monitor starts up normally. No flashing or spots.

  I tried restart, disconnect the monitor from the computer, just stop and unplug it, then reconnected. I tried to plug the old monitor (using VGA connection) and start again, with the same result.

  I tried to recall the NVRAM (found the instructions on this site) and it made no difference.

  It would be appropriate to get a HDMI cable to connect the?

  It seems to me that if the computer does not recognize the monitor, try another cable wouldn't make any difference, but I'm really an 'end user' at this stage and would appreciate any advice.

  Thank you!

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  The VGA input and cable works with another computer/device?

  The port of exit on the Mac works with another monitor?

  What model Mac pro?

  What video card is installed in the Mac?

  What output port are you helping?

  Maybe the video card has failed. If yo have an old Mac Pro with an original which is likely to card

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• I was not able to transmit or send messages to groups of people at the same time

  Today, Microsoft introduced what I consider to be a useless form of signaling messages on the e-mail.  Because who is is that I was not able to transmit or send messages to groups of people at the same time, people who are included in categories such as Favorites.  How can I go back to the old system please

  Hello

  1. which e-mail account do you use?

  2. you have any mail client installed on the computer?

  In the case where you use Windows live Hotmail as the e-mail account, then you can post the question on the link provided below for assistance.

  Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

• Monitor says no signal after moving the computer

  need help to make the monitor iluminate

  My windows xp is just moved to another room with a new distance map and functioning. After the move, the monitor says no signal! The computer and the monitor seems to work but the screen goes black after showing NO SIGNAL and goes to sleep.

  One step at a time.

  Also, I would also like to make these windows xp and windows live units communicate with each other in my home group.

  Bill enjoy life

  Hello

  I suggest you to check the physical connection that is connected to your computer?
  I suggest you to follow the steps and check.

  No input Signal message.

  Cause

  This problem may be caused by one of the options below.

  1. Monitor not connected correctly.
  2. Faulty hardware

  Solution

  Monitor not connected correctly

  Verify that the monitor is connected to the back of the screen, as well as the back of the computer.

  If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.

  Faulty hardware

  If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.

• DisplayPort XB270HU questions - 'No Signal'

  Hey, Acer.

  I just bought a XB270HU monitor. I was really excited, because I had also bought a new GeForce 980 TI video card to get the best out of the 144 Hz that this monitor can support. (Also, you know, G-SYNC.)

  So, I was very disappointed when I started having problems DisplayPort.

  When I turn on my computer, the video works fine, but as soon as Windows starts loading, I see a 'No Signal' message. (This happens even on three DP connectors, this isn't a problem with a defective port). From what I found online, this seems to be a known issue with the graphics chips from NVidia Maxwell and DisplayPort monitors. (And my graphics card worked perfectly when I used a DVI monitor with her for the past two weeks.)

  However, were a few times where I got my monitor to work:
  1. with another monitor connected to the DVI port on my video card. However, when I unplugged my DVI monitor, my XB270HU has stopped working immediately. I have reproduced twice.
  2. the very first time I used each of the three DP channels on my video card. The first time I used my monitor with DP #1, it worked. I was even able to play games. But after I restarted my computer (and turned to my monitor and the new), DP #1 did not work. I then plugged my monitor DP #2, and yet once again, it worked, until I rebooted. Same thing with DP #3.

  I'm inclined to believe that this is a problem with my video card (and probably a handshake problem), since I noticed others problems solved with a new BIOS from their card provider. And I already have a support ticket with ASUS (my graphic card provider). But I also wanted to reach out to the Acer support to see if you've found a compatible solution yet. Maybe there is something in a newer version of the firmware that can answer this, or plant something in the menu. I'm willing to try almost anything, so I'll cross my fingers and hope you have a few ideas.

  So, I have an update, but it is not super satisfying.

  I've since sold this monitor. Is running, when it is connected to a reference EVGA GTX 980, it works perfectly. No DP 'No Signal' no questions, no interaction with other ports on the back of the weird video card. No doubt which means that there is something wrong with some Maxwell maps (GTX 9 x 0 series). I guess I could have RMAed my 980 Ti and obtained without this problem, or switched to an EVGA card that entitled vBIOS installed. It is therefore not the monitor. Or not entirely screen.

  I don't know if subsequent revisions of this monitor did anything at their end to alleviate the problems of handshake of DP, or if it should be on the side of graphics card. But I'm here to say that, in this case, the monitor does not seem to have had the problem.

• HDX18 external monitor receives no signal

  My HDX18 connected to an external monitor.  Powered monitor 'no signal' message is displayed on the monitor.  It was a working arrangement and has recently stopped after disconnection and reconnection of the monitor.

  Try to connect the monitor to another machine to make sure that the monitor is working.  Try to attach another monitor to your machine.  Recently point any driver software, including video?  Tried the function and the combination of F keys for switching between external, internal and two screens?

• How to disable messages on monitor HP 2010?

  So I plug the monitor hp 2010 to my PS3 with a HDMI cable to DVI. The monitor only supports the resolution of 1600 x 900. Apparently, the PS3 can only produce in 720 p or 1080 p. When I select 1080 p, the picture seems clearer and sharper on 720 p. I can see everything fine.

  However, when I output in 1080 p, the "input out of range signal" message appears on my screen. Is there a way to bypass this just message or turn it off to appear on my screen?

  Hello @ivDetox,

  I understand that you are looking to disable the error messages on your monitor 2010 HP. Unfortunately, your monitor doesn't have the ability to disable the error messages.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Message on my screen

  I do not turn off my computer at the end of the day.  My monitor has the 'no signal' message until I have shake my mouse.  What does that mean?

  Best advice I can offer is to change your habits.  You simply carry your computer and fill in lots of dust.  Your computer has several Motors inside.  What do you think of these engines ever when they run 24 x 7?