No software DVD player with my new Satellite Pro P200

Similar Questions

• Problems with multitasking on Satellite Pro P200

  I am the owner of a new Satellite Pro P200.
  I use this laptop to use software such as photoshop, indesign, etc.

  * Now I have problems with multitasking! *
  It is not possible to run 3 programs at the same time.
  That I have to restart my laptop again and again.

  Does anyone know what is the problem?
  Can someone help me with this problem?

  For two weeks I have P200D. I use it for work and use different applications at the same time. So far, everything is OK and I am very satisfied. Maybe you should try to optimize the operating system:
  -remove all software, you do not need
  -disable the startup of unnecessary software of automatic startup (MSCONFIG)
  -customize the appearance
  -information on the open performance and Control Panel tools and use tasks on the left side to improve the performance of computer s

  P200 is powerful enough and must be able to manage with a few applications running at the same time.

• How to get XP Pro DVD replacement for all new Satellite Pro L300?

  I have recently received a satellite Pro L300 series laptop PC and have decided to put this on the local domain on site. In the present, we would also like to downgrade to XP Pro machine but the DVD included to do was cracked, how can I get a replacement for this drive?

  I contacted the seller, and they noted the manufacturer, I searched this site and not able to find something that points me in the right direction.

  Hello

  The recovery media can be ordered under https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Satellite Pro P200-HD: how to use it with Win XP

  Recently, I received the new Satellite Pro P200 HD of Getech. I asked Getech to change the XP operating system because my University will not support Vista. I was told that some features are lost with XP, such as the hot key utility and I agreed to go ahead.

  However, I was not informed that the sound is scratchy and the video will behave as if I play a scratched CD.
  It is true with windows sounds as well. I was not able to enjoy the music or video. I have all the drivers updated and the new Bios XP released recently has been updated.

  Please does anyone know someone using this model with XP as an operating system with the sound and video works properly?
  This would mean that I was sold a laptop with a defective sound equipment and should get a replacement because I had this problem from day one.

  Thanks for the help in advance.
  Calvin

  * @ Vivien *.

  How about this:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  There, you might choose the satellite Pro P200 to download XP drivers

• Satellite Pro P200-15W: drivers ATI Mobility HD2600 & game bugs

  Hello
  first of all, please, I beg you, forgive my English, I use a translator

  message from Ati:

  + "" Please contact AMD customer care for ATI products service! +

  + The only version that you can use your card is one that is available to the manufacturers of your laptop's Web site. Unfortunately, with 2 cards Radeon to the k series, laptop manufacturers has decided to be the only provider of pilots. We cannot offer you a software. » » +

  It is a big problem, because the gaps are excluded in for example some games.
  I have problems with Bioshock (and others), the drivers recent ATI solve and improve a lot of things, but they do not exist for the ATI Mobility Radeon HD 2600.

  I have Windows vista Business, in a new Satellite Pro P200-15W, is a very good laptop, but unfortunately without the updated drivers with the last improves the manufacturer Ati will have lost performance and bugs without resolving (I think)

  Is no way to solve this?
  Thank you
  Pablo

  > Here is the technical service of Toshiba?
  It seems that it is only a user forum. Here no Toshiba technician!

  > How is it possible that do not allow to use the latest drivers from ATI?

  Because graphics cards for laptops are not the same thing as s GPU for laptops!
  Toshiba graphics card drivers are a bit changed. The drivers support a thermal protection to prevent GPU notebooks against damage.

  The graphics in the books don t support an own huge cooling modules as the GPU workstations.
  Therefore, the graphics driver must control the growth of the temperature. If the temperature increases to a critical level, the GPU driver decreases the performance of the graphics card to lower the temperature.

  The original ATI don't support such characteristic graphic drivers!

  But there should be a possibility to use the ATI drivers.
  You must download the ATI driver package and install the driver from the Device Manager.
  There, choose Install from a list or a specific location-> don't search. I will choose the driver to install.
  Then simply select the INF file that was downloaded with the package.

  But note; These drivers can be used only at your own risk!

• Installation of Windows XP on Satellite Pro P200

  Hi guys,.

  I have a problem installing Windows XP Home SP2 (listen Slip) edition in my new Satellite Pro P200 with 2-120 GB hard drives. The vehicle currently has windows vista professional. I followed this link to a similar question on this site: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go % 21 and created disk Intel Matrix Storage manager so that I could use "F6" to install the RAID drivers during the installation of XP.

  I got to the point where I was able to recognize the hard drive and I was able to select the partition where I wanted to install WXP. Once the NTFS partition has been selected and formatted, Windows XP Home edition Setup prompted me to insert "Intel Matrix Storage" diskette into the A: drive. I have this drive in my floppy USB drive.

  However he didn't even read the disc. Hard drive never turned on when I pressed the enter"" key. It seemed as if the installer froze, however I was able to push "F3" to exit the installation program. Can someone tell me what I'm doing wrong here? Is the USB problem?

  Help, please!

  I really put t understand those who wait and wait and wait for a solution instead of search here in this beautiful (forum) knowledge base for similar topics:

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Satellite Pro P200: Cannot play Age of Empires, because DirectDraw

  I just replaced my old laptop (a ps210e) with a 15th Satellite Pro P200.

  I can't my old age of Empires II game to run--the error message is "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. »

  Google told me that there is utility to run to test this called dxdiag and I ran it and it says allowed to DirectDraw acceleration (as well as many other things).

  So, what should I do to get the Age of Empires to run?

  Moreover, is this an official forum of Toshiba to get technical support, or simply a community of user group? I couldn't find anything on the Web of Toshiba UK site actually contact the Toshiba direct technical support.

  Thank you

  Stand by. Have you Vista preinstalled Satellite Pro P200? Did you check the minimum system requirements for Age of Empires?

• I bought adobe creative suite 6 on the apple store with my new mac pro book and may not know how to install it on my computer that I don't have a cd player.

  I bought adobe creative suite 6 on the apple store with my new mac pro book and may not know how to install it on my computer that I don't have a cd player.

  You can download and use the serial number of your drive to activate it.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• No sound in Satellite Pro P200 with XP

  Hi all.

  I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

  I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

  Any idea?

  Thanks in advance.

  Hello

  > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  You're on right way boyfriend, you must also install another patch MS; KB835221
  So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  The problem is that this unit only works in Vista.
  The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
  It's quite new technology designed to support the new features of Vista.
  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  Hope I could help you

• Installation of Windows XP Home edition on the new Satellite Pro L550

  Hello

  I have a new satellite Pro L550 and need to downgrade to XP. If I want to go back to Windows 7 that I can in the future?

  Thank you, Lisa

  Hello Lista

  In my opinion you should look forward and begin using the new Windows7 operating system. It is really good OS, well done and runs with good performance on Toshiba laptops.
  Please note that you have most recent laptop with newer hardware model designed for standards of Win7.
  Yes, you can install Win7 when you want.

  Win7 is fully supported and you won't have any problems with it.
  To return to Windows XP edition family has no much sense to me, except to use some old software designed for Windows XP Home edition only.

  Anyway, what model of laptop you have exactly (L550-xxx)?

• Need software to print on my new PIXMA PRO - 100 person knows what software should I use?

  Need software to print on my new PIXMA PRO - 100 person knows what software should I use?

  Help or the link will be much appreciated.

  Thank you.

  "My printer" supplied with your Pro-100 can do DVD.  You can use their templates or create your own. You can import your own images and make any way you want. Look at the stuff you already have.

• Question sleeping on all new Satellite Pro U500-1EX

  Hi guys,.

  I have a new Satellite Pro U500-1EX with Windows 7 64 bit.

  The laptop is having some problems with its function of sleep. I wonder if others have had the same problem - and if anyone knows anything that can be done.

  OK, there are two questions;
  1. when the laptop enters sleep mode - it will come out it its own after a while. He goes to the login screen and wait about another hour before falling asleep. That's when it is plugged into the power - and no LAN.

  2. when I close the lid to put the laptop into standby - and while on battery - after awhile he will supply any. Connect the power supply won't do anything - the power light not at all - which suggests that the laptop don't even note not be plugged. I have to then remove the battery and turn the computer on (thus losing all the data that I had when I put the computer to sleep!).

  So, have you seen this issue with your satellite pro? This is something common and being ignored - or y at - it an easy solution for it?

  Thanks in advance.

  -Audette

  Hi Audette,

  I have the Satellite U500 also but I can t notice any question about fashion 'sleep'. It works perfectly with an OS preinstalled Toshiba and the latest version of the BIOS. Then perhaps you need to update the BIOS as suggested Timox.

  Before you begin the update, close all running programs (also, AntiVirus and firewall), make sure you are logged in as administrator and do not stop the computer being updated.

  By the way: you use the preinstalled operating system from Toshiba?

• Re: I need to change the CD/DVD drive in my Satellite Pro P200

  Hello

  I need to change the unit of DVD - RW in my Satellite Pro P200, but I 'don't know remove the old unit.

  Someone help me?

  Thank you.

  (Sorry for my English: S).

  Hello

  I advise you to visit this side:

  http://www.irisvista.com/tech/

  Note, if you don't find your model, you can see for others, who may be similar. 1 last thing, remove the battery and use gloves for protection (due to static), be careful with the holders of hidden

  Good luck!

• Unable to play HD DVDs on a Satellite Pro P200

  Until recently, I was the proud owner of a satellite Pro P200, but my DVD - ROM drive is not reading disks hd more. I checked the drivers and harware, it plays all other formats very well.

  The drive is a Toshiba DVGW/HD TS-L802A ATA.
  I read some posts where it says iTunes disables some reg keys?

  Someone at - it ideas?
  Thank you very much.

  > I read some posts where it says iTunes disables some reg keys?
  It's don't know not for me but I know a firmware update is available on the Toshiba driver page.
  This Firmware update corrects the errors with some media.
  It s for a DVD HD TS-L802A drive.

  Maybe you could try updating the firmware and check if that helps.

  Best regards

• Password lost for my new Satellite Pro L850-1DT

  I bought a new Satellite Pro L850-1DT and went through the installation process. He suggested to install a password to logon to safety. So I put an and confirmed. The pc has agreed. The pc then rebooted to install new programs. He asked me to put my password to logon, I did. He said then that is the wrong password. I tried again and again, with different permutations, in the case where I had made a mistake in the initial configuration. No luck. I can't access.

  Y at - it someone who did something similar and who knows of a possible solution to get access. At this point without disk recovery, because I don't have a lot. Please help if you can.

  Oh man why are you doing these stupid mistakes? :(
  You can set the password later. At first, it is important to complete the installation of windows, check the machine and see how it works.

  Your problem is that you don't have a recovery disk. Using the recovery disk, you can reinstall OS and everything will be OK. Now same disk image installation HARD recovery cannot start without this connection password.

  As much as I know there not that you can do about it. I hope someone on this forum has the solution for you. Otherwise order the original restore on https://backupmedia.toshiba.eu/landing.aspx disc