Satellite Pro P200-HD: how to use it with Win XP

Similar Questions

• Satellite Pro P200-1MA: how to disable battery beeps less than 10%?

  I use my laptop (Satellite Pro P200-1MA) especially indoors, connected to the outlet, but because I am a student I travel on a regular basis and usually I watch movies during this time. About an hour and a half in the recall of battery low film begins making movies for the last 10-15 minutes completely unbearable. That is why it is of absolute importance for me to find a way to disable this callback no value. Thanks in advance.

  Have you ever tried to find these settings only?

  Please don't be crazy on me, but it's really raise what you're asking here. You need not more than 2 minutes to find a way to reduce the critical battery level.

• Satellite Pro P200-1JV - how to reset to factory settings?

  Hello

  I'm trying to reset my Satellite Pro P200-1JV to factory settings. I tried pressing reset and turn on, also tried pressing F8 and turn on and no system recovery doesn't happen as I was told that it should.

  I put everything in place of discs with it and it's a Vista operating system.

  Help, please!

  Thank you!

  Al

  Hi alanmanley,

  Why you press the zero key to restore factory settings?
  You can restore the factory settings if you go into the advanced Windows (F8) boot menu and select Repair my computer. Then will begin the recovery of HARD drive and reinstall Windows.

  In addition, this option is available on OS preinstalled Toshiba and the recovery disc, that you create yourself as mentioned in the user manual.

  Last but not least check this article:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite Pro P200-150 - where to find drivers for Win 7

  I have a PC Satellite Pro P200-150 with Vista Business bought in 10/2007.
  I want to change the hard drive 250 GB, I want to take this opportunity to pass on Windows 7 Home Premium Version.
  I'll buy a load of DVD.

  My question is: How can I get the drivers, but especially utilities Toshiba?
  On sites that I've explored I find driver downloads but no public services.

  Thank you for your response.

  Hello

  Check the Satellite Pro P200 driver download area.
  You will find all the drivers Win 7.

  Note: the P200 is a little older series you must choose in the Archive of the Type of product to get the drivers

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• Satellite Pro A300D-131 - how to use the S-Video TV output

  How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

  Hello

  That s easy.
  You must use a 4-pin s-video cable to connect the TV to the laptop.
  Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

  PS: You have to choose the right channel of TV (s-video must be enabled)

  All that s

• Satellite Pro L450 - 17KO how to add SATA to Win XP installation

  My partner is unable to become familiar with Windows 7 and I downgarde to XP Home Edition.
  I understand to install XP I need to make a F6 at the beginning of the process and install a Sata driver.
  Can someone point me in the direction of this driver?
  Thank you.

  Hello

  Maybe this might help you:

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  or this:

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Satellite PRO P200 (PSPB7E): LAN PCI network resources - conflict problem

  Hey,.

  I have a Satellite PRO P200 and I have some problems with the local network. (not a wireless).

  When I plug in the network cable, the system want start at all. The blue power let towers and it is all tha comes.
  If I turn off the laptop, unplug the cable and turn it on, it starts, but the network card is more installed.
  I already downloaded the driver from Realtek for Vista 32 bits from the website, but no difference.

  In fact, the driver is not recognized as being a good driver for the device. I select the driver manually in a list (using have disk etc..) to get installed it. After the re-setup all the parameters of the network card in Vista or disappeared, always on dhcp.

  I already had a blue screen (vista dump), during the installation of the device.
  And a mistake:
  Conflict of resources - controller Netword PCI in the location 08
  Bus: 04, device: 00, function: 00
  Press to return to for Setup.

  I also tried to turn the peripheral as the third lan of start-up, but it automaticaly turns on again.

  I tried to update the bios to the latest version, she too successful (not), but it did not solve my problem.

  Any ideas?
  hardware failure?
  I guess that's not possible the device lan switch?

  Hello

  I read a lot of stories here, but yours is really amazing. I don't know what the problem is here, but try to enter the BIOS settings and set it to the default value. After doing this install OS using recovery media.

  Now that you must clean preinstalled OS and your laptop will have factory settings. Please retest the functionality of network card. If the problem persists, you need professional help.

• Re: How can I add a second internal hard drive to a Satellite Pro P200?

  I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector.

  I contacted Toshiba Dutch customer service who said that it was official policy not to provide any information on a second internal drive. They also said that they would not provide parts to make it possible.

  Can anyone provide more information?

  Hello!

  I think that if there is no connector you cannot add a second HDD.
  It of Nice to have a second Bay, but it's nothing without a connector.

  Good bye

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Failure of the BIOS - Satellite Pro P200 - 16 c

  I installed Windows 7 64 bit on a laptop Satellite Pro P200 today. I then tried flashing the BIOS through windows with program Flash BIOS on Toshiba driver download page. I used the program flash for Vista because none is available for Windows 7. The program started and took a backup of my old version of BIOS and then Flash the BIOS. Then after a while an error occurred saying that this operating system was not supported.

  Alright. I restarted the computer and he was going to access the BIOS to see if the new version was done to install or not. But I can't access the BIOS now since the TI of suddenly password protected. I tried Google known standard Phoenix BIOS passwords, but they do not work. Now I've mistyped the password if often the computer won't let me even start without entering a correct password.

  How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?

  Help, please...

  Hello

  You used not compatible BIOS and it seems that module ROM BIOS was not flashed properly.
  Unfortunately, there is nothing to do but to contact the ASP of Toshiba in your country,
  Guys could remove the password and can reflash the BIOS using a traditional disk BIOS version and the crisis.

  > How can I reset the BIOS? Should I open the laptop and remove the CMOS battery? Which will work?
  No, remove the CMOS battery would not help because as far as I know that the CMOS battery is not removable on laptops just ASP can clear the BIOS password.

• No software DVD player with my new Satellite Pro P200

  Just bought a new Satellite Pro P200 and, to my surprise and dismay, it has software player DVD No. inside? I downloaded the DVD drive on the official download here, but Vista abandoned the facility saying that I can not install the application. Have you tried to configure it as a Admin, but the same message is given running.

  Suggestions as to how I can get the software to run movies DVD on the new laptop computer would be most appreciated.

  The laptop is model is PSPB7E, it has Vista Business installed and has a HD-DVD drive installed.

  Would apprecate a response early to what I already plan to return this item, demanding a full refund since it seems that it does NOT use a software which SHOULD run (IE. Compatible versions of some software XP will simply not installed because Vista blocks!).

  Kamshot - discouraged by the new culture of 'Vista '!

  Hi Kam

  As far as I know every Toshiba laptop comes with pre-installed software allows you to watch DVD movies. It is a part of the standard installation and the application is called WinDVD.

  According to the specifications of the laptop, your laptop has no HD DVD player, just DVD-Super Multi (+ r DL). Because of this there is no HD DVD player.

  > Would apprecate a early response to what I already plan to return this item and requesting a full refund because it > seems that it does NOT use a software which SHOULD run

  No comments for this

• Recording on Satellite Pro P200

  How can I connect an audio mixing table, record of my Satellite Pro P200? I have Cakewalk Sonar.
  Thank you!

  Hello

  If you want to do this on a professional path you should look for more information on the net and maybe check some forums on the audio/video support. These things have nothing to do with specific for laptop or desktop manufacturers.
  As Homer written you can use an audio cable and connect it to the microphone port on your desktop. I don't know how it will work with your software. You can also use external devices like this.

  As I've written before, use Google and see what others wrote about the experiences in various media forums.