G560 disassembly to replace the touchpad

Similar Questions

• Pavilion 17-g173ca: replace the touchpad on the keyboard

  Touchpad on the front, under the keys is difficult for arthritic fingers deformed.  Find buffers left & right clicker easier on the fingers.  Advice where to ask for help to replace the touchpad.  No need to replace the entire keyboard.  Ideas suggestions appreciated.  Trish

  Hi @Trishebear,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the help of the touchpad. I'll be happy to help you.

  There is no alternative with another type of touchpad.  May I suggest buying a USB mouse or a wireless mouse.  I use a trackball, that I find it easier to control the pointer, but that's just me.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Is satellite U400 - possible to replace the touchpad button?

  Hello

  I need help please. I want to know if there is a possible way to change the button to my Satellie U400 because they become soft and they are not as good and strong as it was before, please someone know if I can delete these and put 2 new sound?
  If you don't understand exactly what I want to say take a look at the photo and you will see/understand.

  [http://oi56.tinypic.com/j0wwoj.jpg]

  Thank you.

  Lööw salvation,

  I'm sure that it of possible to replace the touchpad buttons because you can replace everything on a laptop. But I think that it s a little trickier because you must remove a lot of pieces and that's not easy.

  You should ask an authorized service provider guys can order the new spare part for you and exchange it. Just write an email, for example, to get in touch with them.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Replace the touchpad on X121e?

  Hello

  Is it possible to change the type of the touchpad on the X121e? I think the default is appalling. It is too small, with a little useless where it bends toward the keyboard, and I find it very choppy.

  I do not use the TrackPoint, so ideally, I would like to replace the 2 big buttons and small touchpad with a decent flat touchpad. Is it possible to do?

  Andy

  There is no way to replace the touchpad for another type.

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.

• HOW CAN YOU RE - INSTALL THE TOUCHPAD ON YOUR CONTROL PANEL? I DID A STUPID THING REMOVE THE TOUCHPAD CONTROL.

  I bought a mouse to replace the touchpad. I have big clumsy hands and the mouse works better for me. But the touch-pad but the touch pad turned itself by default. In order to have enough; I'm for the control panel and deleted. Instead of the touchpad to stop for good, he is so on instead of for good. How can I get the rear touchpad I deleted it after that? HELP ME PLEASE!

  Usually the only way to restore it is to download the software again.  You may be on a CD of backup supplied with your computer, or you can go to the Web site of your computer manufacturer to see if they have available for download (usually in their support section).

  But first, here's a step easier to try first.  Just restore your computer back before you deleted.  It of easy, takes only a few minutes, and it will affect all of your files (it only restores the software/system settings).  Here's how:

  1. Go to start and type Action Center (when you start typing, the search screen will display automatically).  Click on 'Settings' on the right side, see search results settings, and then choose the outcome of the "Action Center".
  2. In the center of the Action, at the bottom right, click recovery, and then click System Restore open (2nd option).
  3. Select choose a different restore point, and then choose a date before you deleted the software.  Click next to continue.  The computer will restart with the settings/software at this time.

  I hope this restores you back in until the software has been removed.  If not, you can try another restore point or undo the restore operation.

• How to disassemble the Qosmio E10 to replace the cooling fan - need manual

  Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

  Now stuck at removal of keyboard connector.
  No idea what fan model numbers so I can order before the band down.

  Hello

  Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

  Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

  So I think that he of better go to a technician because he has more experience.
  In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

  have a nice we

• How do I disassemble a HP G60-519WM to replace the keyboard

  How do I disassemble a HP G60-519WM to replace the keyboard?

  Hello:

  Please see if this maintenance and service guide will work for your series model.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  R & R procedures can be found in Chapter 4.

  Paul

• Disassemble a HP G71-329WM laptop to replace the keyboard

  Can someone please provide some good info on disassemble a HP G71-329WM laptop? I am wanting to replace the keyboard which has several keys stuck. I already have a replacement keyboard, but not sure about all that must be loosened and where? Any help would be greatly appreciated. Thank you.

  Hello

  The procedure to replace the keyboard starts on Page 60 of your & Maintenance Guide.

  Kind regards

  DP - K

• How to take off the touchpad to replace?

  Please, I'm stuck, my palmrest of my Sony VAIO VGN-FW250J is broken and I bought a new replacement, but it came without the touchpad. How can I disable the touchpad of an old then paste it into my new palmrest?

  Hmm, it depends on the complexity of the touchpad is built. Images of the palm rest replacement, the tablet should be connected via a small socket on the left side of the old Palm. Two scenarios can occur. One, the touchpad is "stuck" with a kind adhesive or something and may or may not break the withdrawal. The other scenario is he will be disabled just pop quite easily and it will be an easy swtich to the new.

  You have already removed the old plam rest? If so, have you tried to remove the touchpad? Let know us and we can go from there.

• the touchpad on the generation of apple tv 4 does not swipe

  Just unpacked my generation Apple tv 4 refurb.  I gave the remote control a short load before you try set up.  I was able to pair the remote control but the touchpad does not respond to the finger swipes. There is no way to make selections.  I was able to use my mini iPad to Setup wifi, apple store and iCloud.  When asked to allow location services there is no way to select my choice.  Also on the built-in keyboard I can click but not drag to select the letters.  Looks like a defective remote to me.  All opinions. ?

  Charge for about three hours. If the remote control is correctly associated with ATV, but the touchpad stil does not work, get it replaced.

  Apple TV User Guide - site https://help.apple.com/appletv/#/

  Apple TV User Guide - iBook https://itunes.apple.com/us/book/apple-tv-user-guide/id1050195582?mt=11

• Replacing the CD/DVD with SSD

  Hi, I have a mid-2009 13 "Macbook, and I plan to replace the CD/DVD drive (which it doesn't) with an SSD, instead of replacing it with a new CD player.

  I would move so that OSX and software on the new SSD, leaving other data on my main hard drive. I read that the best solution is to install OSX on the SSD from scratch, since migration it seems impossible, but how then I could remove the 'duplicate' old of my HDD main OSX?
  The entire migration process is not quite clear to me, I wouldn't mind some step by step instructions.

  Thank you in advance!

  1st, I did it on an iMac, so I went through it.

  You can use a utility cloning as Carbon Copy clone (demo fully active 1 month) or SuperDuper free (free for a full clone) to move your boot disk for SSD and it will be fully functional.  In my case, I used Carbon Copy Cloner.  It is even technically possible to use the Applications-> utilities-> disk utility-> restoration as a means to clone the drive, but I find it cumbersome.

  <http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html>

  <https://www.bombich.com/>

  I think you could also just restore a backup Time Machine for the SSD as well (although I did not do that, so I don't know the details).

  You can do a clean install and get rid of any cruft you've accumulated over the years and then install only the stuff that you are currently using.

  Or you could do a clean install and then use the Applications-> utilities-> Migration Wizard move above specific categories of files of initial startup disk.

  After you have the SSD running with your software on it, consider allowing TRIM

  <http://www.imore.com/os-x-10104-and-trim-support-should-you-turn-it>

  I used OWC <http://MacSales.com> kit data-Doubler to replace my iMac DVD by an SSD.  They provided everything I needed.  I chose a kit including the tools I needed.  I also watched the OWC installation videos, as well as on YouTube to become familiar with the installation.  And I had a copy of the instructions to disassembly <http://iFixIt.com> and images to print for reference, while doing the installation.  I would have recorded any screws that I removed the instructions that told me to remove that screw then I would make sure I would put the correct screws into the appropriate holes.

• How to replace the screen-Portege 3500

  Hello

  Please could you give me some advice or instructions on how to remove and replace the screen on my laptop?

  The external glass is intact, but the actual screen itself is damaged.

  It would also be a great help if someone knew the product number of the replacement in this way screen I should be able to buy the right pair.

  Thank you for reading
  Kind regards

  Hey mate,

  First of all I must say that replacement of the screen, and the disassembly of the laptop is usually quite complicated and delicate. You must remove a large number of screws, it must be very careful. So it's not easy to replace the screen.
  Maybe you can find some instructions if you're looking for with Google

  And a replacement screen or number, you can get your authorized service provider. Simply contact the guy and ask for help and they can exchange the screen too.

• Replacing the screen on Satellite C50-A-1CK

  Hello

  The screen of my C50-A-1CK Satellite was recently broke and I need a replacement, but I have no experience with this sort of thing. Editing actually screen won't be a problem (I'm lucky enough to have friends who will fit it free) but I need to buy one and I'm not sure which one to buy.

  I'm looking for something around £40 or less if possible, and I'm in the United Kingdom, if a British salesman would be best. I would prefer to get one on eBay, if possible, so I would really appreciate if I could get a link rather than just "oh looking for it and you will find.

  I thank very you much in advance!

  To be honest, it is not easy to give you some good advice on this. Why? Replacing the screen is rather complicated and almost entire laptop must be disassembled. To do this you need manuals maintenance with explanation step by step how to do this and avoid any damage. This document is not a public document, so I do not know who want to help and how.

  If a person without experience and expertise want to do this, can damage your laptop even more. There are many smallholders plastic that can be broken or damaged.

  I don't know, but in my opinion, you should contact Toshiba service nearest and ask for help. It costs a little, but it will happen on the vocational track.

  Anyway, I don't live in the UK so I don't want to pick you up. You can check ebay UK and search for 15.6 HD 200 CSV LD and if you find a seller contact by phone and check compatibility with your laptop satellite.

• Where can I find guides to replace the backlight for satellite A210 - 1 4?

  My display does not illuminate. I need to check a number of things, including the backlight, inverter and door switch. May need to replace the whole LED display.

  Does anyone know of instructions to do these things with this particular model: Toshiba Equium A-210/1_C_4

  Laptop disassembly is permitted for staff only of Maintenance manuals is not available for download. It is not a public document.

  If you want to only use Google and check if you can find instructions written by people who have such experiences or check if you can find a few short film on YouTube.