No sound after downgrading to XP SP3

Similar Questions

• Dv4-1413tx - no sound after downgrade to xp vista frm

  Hello...

  I recently bought a HP dv4-1413tx with vista home premium pre-installed on it. I tried it downgrade to Windows XP SP2. Managed to install XP on it but feels a hell of a time with drivers... Especially the audio. There is absolutely no sound. Not even the beeps.

  I tried to install UAA audio bus driver first and then the driver of HDTV LSI etc. but still no sound. I spent several hours on this subject...

  Peut - some kind soul please direct me on how to go about this case?

  I remember that I was in a similar situation some two years back in an attempt to re - install Windows XP on another laptop from my friend. We install everything except the audio. Finally, the technician at the shop could install for us. Now I'm away from the place... So can not go and find out that the man how it install it. It was also a HP laptop only...

  I would like to add that the mute button stays red and does not respond when you press.

  There is nothing about Audio in Device Manager... Maybe that's the problem.

  These are the hardware ID:

  ===========
  PCI devices
  ===========
  PCI\VEN_10DE & DEV_06EC & SUBSYS_30F7103C & REV_A1\4 & 23FE4F77 & 0 & 0008: NVIDIA GeForce G 105M
  PCI\VEN_10EC & DEV_8168 & SUBSYS_30F7103C & REV_02\4 & 22AB4E2B & 0 & 00E3: Realtek RTL8168C (P) / 8111C (P) PCI-E Gigabit Ethernet NIC
  PCI\VEN_8086 & DEV_2448 & SUBSYS_00000000 & REV_93\3 & B1BFB68 & 0 & F0: Intel(r) 82801 PCI Bridge - 2448
  PCI\VEN_8086 & DEV_2919 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & F8: Intel(r) ICH9M LPC Interface Controller - 2919
  PCI VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA: Intel(r) ICH9M-E/M SATA AHCI Controller
  PCI\VEN_8086 & DEV_2930 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FB: Intel ICH9 Family SMBus Controller - 2930
  PCI VEN_8086 & DEV_2934 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E8: Intel ICH9 Family USB Universal Host Controller - 2934
  PCI VEN_8086 & DEV_2935 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E9: Intel ICH9 Family USB Universal Host Controller - 2935
  PCI\VEN_8086 & DEV_2936 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EA: Intel ICH9 Family USB Universal Host Controller - 2936
  PCI VEN_8086 & DEV_2937 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D0: Intel ICH9 Family USB Universal Host Controller - 2937
  PCI VEN_8086 & DEV_2938 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D1: Intel ICH9 Family USB Universal Host Controller - 2938
  PCI\VEN_8086 & DEV_293A & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EF: Intel ICH9 Family USB2 Enhanced Host Controller - 293-a
  PCI\VEN_8086 & DEV_293C & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D7: Intel ICH9 Family USB2 Enhanced Host Controller - 293C
  PCI\VEN_8086 & DEV_293E & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D8: Bus Driver Microsoft UAA for High Definition Audio
  PCI\VEN_8086 & DEV_2940 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E0: Intel ICH9 Family PCI Express Root Port 1 - 2940
  PCI\VEN_8086 & DEV_2944 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E2: Intel ICH9 Family PCI Express Root Port 3 - 2944
  PCI\VEN_8086 & DEV_2946 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E3: Intel ICH9 Family PCI Express Root Port 4 - 2946
  PCI\VEN_8086 & DEV_2948 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E4: Intel ICH9 Family PCI Express Root Port 5 - 2948
  PCI\VEN_8086 & DEV_294A & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E5: Intel ICH9 Family PCI Express Root Port 6-294 has
  PCI\VEN_8086 & DEV_2A40 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 00: Mobile Intel (r) 4 Series Chipset processor to DRAM - 2A 40 controller
  PCI\VEN_8086 & DEV_2A41 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 08: Mobile Intel (r) 4 Series Chipset PCI Express Root Port - 2 has 41
  PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00\4 & 2A17DF6C & 0 & 00E2: Intel (r) Wireless WiFi Link 5100
  22 correspondent or the devices found.
   
  ===========
  USB devices
  ===========
  USB\ROOT_HUB\4 & 12221D3B & 0: USB root hub
  USB\ROOT_HUB\4 & 2044AD61 & 0: USB root hub
  USB\ROOT_HUB\4 & 29C7184A & 0: USB root hub
  USB\ROOT_HUB\4 & 32817C7F & 0: USB root hub
  USB\ROOT_HUB\4 & 37E9A870 & 0: USB root hub
  USB\ROOT_HUB20\4 & 2BF3D41C & 0: USB root hub
  USB\ROOT_HUB20\4 & 87AE6AB & 0: USB root hub
  USB\VID_03F0 & PID_171D\5 & 24058FCE & 0 & 1: integrated Module with Bluetooth 2.0 wireless technology HP
  USB\VID_0781 & PID_5150\20043513330A7FE20BF8: USB mass storage device
  USB\VID_174F & PID_1107\STK00001: USB Composite device
  USB\VID_174F & PID_1107 & MI_00\6 & 3AB7CE14 & 0 & 0000: USB video device
  USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_MINI&REV_0.1\20043513330A7FE20BF8&0: SanDisk Cruzer Mini USB Device
  12 person or the devices found.
   
  =============
  Input devices
  =============
  No matching device found.
   
  ============
  ACPI devices
  ============
  ACPI\ACPI0003\2 & DABA3FF & 0: Microsoft AC adapt
  ACPI\AUI0216\4 & B310638 & 0: Synaptics PS/2 Port Compatible TouchPad
  ACPI\ENE0100\3 & B1BFB68 & 0
  ACPI\FIXEDBUTTON\2 & DABA3FF & 0: ACPI fixed function key
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\HPQ0004\3 & B1BFB68 & 0: A sensor of HP Mobile Data Protection
  ACPI\INT0800\4 & B310638 & 0: Intel(r) 82802 Firmware Hub Device
  ACPI\PNP0000\4 & B310638 & 0: Controller Programmable interrupt
  ACPI\PNP0100\4 & B310638 & 0: System clock
  ACPI\PNP0103\4 & B310638 & 0: High precision event Timer
  ACPI\PNP0200\4 & B310638 & 0: Direct memory access controller
  ACPI\PNP0303\4 & B310638 & 0: Standard 101/102 key or Microsoft Natural PS/2 keyboard with HP QLB
  ACPI\PNP0A08\2 & DABA3FF & 0: PCI Bus
  ACPI\PNP0B00\4 & B310638 & 0: System CMOS/real time
  ACPI\PNP0C02\4 & B310638 & 0: Mother resources
  ACPI\PNP0C04\4 & B310638 & 0: Numeric data processor
  ACPI\PNP0C09\1: Integrated controller compatible ACPI Microsoft
  ACPI\PNP0C0A\1: Microsoft ACPI battery compatible control method
  ACPI\PNP0C0B\0: ACPI fan
  ACPI\PNP0C0C\2 & DABA3FF & 0: ACPI power button
  ACPI\PNP0C0D\2 & DABA3FF & 0: ACPI lid
  ACPI\PNP0C0E\2 & DABA3FF & 0: Sleep button ACPI
  ACPI\PNP0C14\0: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C14\NVIF: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C32\1: Direct Application Launch button
  ACPI\PNP0C32\2: Direct Application Launch button
  ACPI\PNP0C32\3: Direct Application Launch button
  ACPI\PNP0C32\4: Direct Application Launch button
  ACPI\PNP0C32\5: Direct Application Launch button
  ACPI\PNP0C32\6: Direct Application Launch button
  ACPI\PNP0C32\7: Direct Application Launch button
  ACPI\PNP0C32\8: Direct Application Launch button
  ACPI\THERMALZONE\THRM: ACPI thermal Zone
  ACPI_HAL\PNP0C08\0: System compatible ACPI Microsoft
  ROOT\ACPI_HAL\0000: ACPI Multiprocessor PC
  36 correspondent or the devices found.
   
  ============
  HDA Audio
  ============
  No matching device found.
   
  ============
  RAID devices
  ============
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA
  Name: Intel(r) ICH9M-E/M SATA AHCI Controller
  Hardware ID:
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C
  PCI\VEN_8086 & DEV_2929 & CC_010601
  PCI\VEN_8086 & DEV_2929 & CC_0106
  Compatible IDS:
  PCI\VEN_8086 & DEV_2929 & REV_03
  PCI\VEN_8086 & DEV_2929
  PCI\VEN_8086 & CC_010601
  PCI\VEN_8086 & CC_0106
  PCI\VEN_8086
  PCI\CC_010601
  PCI\CC_0106
  1 correspondents or the devices found.

  Can someone please help...?

  If someone who knows tell me how and in which order and what drivers to install, from the XP just installed and ready on the system, I would be very grateful... Then I will be re - install all drivers in the correct order after I freshly installed windows xp again!

  Thank you...

  Message edited by pjr on 20/07/2009 09:02

  @pjr.

  Drivers for Windows XP:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA for SP2 (required with a reboot before the graphics and Audio, Modem driver) here

  MS-UAA for SP3 (required with a reboot before the graphics and Audio, Modem driver) here

  NVIDIA GeForce G 105M

  Modded Drivers NVIDIA drivers 185.85 worm.

  How to install under XP:
  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3. install & restart.

   

  Intel Wireless 5100 here

  Bluetooth Wireless here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41698, vista, work reported in here XP driver

  2 sp41693, pilot, work reported in XP here view

  3 SP39671, driver, jobs reported in XP here or here view

  When you install a sound driver with checking the success is your sound work.

  If there is no sound after reboot check this thread. There is information how to fix this problem.

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Alps Touchpad here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  ENE CIR (infrared receiver) here

  JMB38X card reader Host Controller Driver here

  If you had for 7 unknown devices with IDs of devices such as below (buttons drivers), here

  ACPI\PNP0C32\1
  ACPI\PNP0C32\2
  ACPI\PNP0C32\3
  \4 and so on

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Satellite Pro U400 - no sound after downgrading for Win XP

  Hello

  I hope someone can help!

  Have just downgraded from Vista to XP pro U400, downloaded all the drivers I could get on the Toshiba site but I still have PCI Device and unknown device drivers are not installed for.

  Think it must have something to do with the sound when I tried to load sound divers, he came up with "cannot find media device" If don't have her no more, anyway don't know what to do next.

  Thank you for the charges

  Hello

  This theme has been discussed here many times.
  It s a general problem with Windows XP!
  If you n t install the patches MS as KB888111, KB835221 and then you would not get the sound.

  You must install these cites patched before install you the audio driver!

  If the driver has been installed you must remove it first before the patches are installed.

  PS: This MS patches are part of the SP3 too!

• Satellite L30 PSL33E: No sound after downgrade to XP

  My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
  But now, the built-in speaker does not work. Where can I find driver for them.

  Excuse me for my English, but I never learn this language :) sorry ;)

  Hello

  Solution is simply ;) you must first install the Microsoft patches (patches) KB888111 and KB835221.

  These two hotfixes must be installed before you try to install the audio driver!

  Here's my advice;
  First, install * KB888111, KB835221 * and then restart the device and after this short intervention, install sound driver that was downloaded from the European driver Toshiba page.

  I hope this helps you.

  Best regards

• Satellite Pro L40 - sound after installing Windows XP SP3 driver

  Hello

  I bought the Satellite Pro L40 about 6 months ago and the speed of the laptop is too slow with windows Vista. So I decided to install an old copy of windows XP that I had purchased earlier. I updated the windows SP3 installation before installing the drivers.

  Now, all the drivers have been installed correctly except the audio driver. I downloaded the XP version of the driver on the toshiba site, but it did not work. So I though that maybe the vista version would work, so I downloaded that. But that no longer works.

  Can someone suggest a solution where I can get the audio driver to work? Preferably without having to get the reinstalled windows again.

  Please help me...!

  Thank you

  Hello

  Try to reinstall the driver for sound card for XP; Just go here-> [fo Realtek card its Driver XP | http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]

  Hope this helps :)

  Post edited by: iSkO

• Have no sound after reformat Windows XP SP3 and updates

  I had to reformat my windows XP, SP3. Everything was fine, then to halfway through microsoft dates I lost sound.  It shows no drivers for sound, or I have a sound card, which is on the mother boaed. My sound and drivers is where?

  This a problem known but undocumented. Re-install the drivers from your sound card.

  See you soon,.

  Jerry

• Satellite U300 - 11y - no sound after installing win XP, SP3 rc1

  Finally got my U300 working with XP, but I can not get the operation. The proper drivers are installed, but nothing. Hardware working on Vista, so this seems like a driver problem. I think realtek for somereason Setup is not totally complete the configuration.

  I followed the advice on
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99567 but no luck.

  Becomes pretty nervous now, I need sound for Skype in my company.

  Thanks guys,.
  Tim

  Post edited by: ADMIN

  I have seen working on Satellite U300 WXP and well I used Skype. The sound quality wasn't the best but it works.

  Somewhere on this forum I found info on Microsoft KB888111 and KB835221 patches. This should help not working sound on Windows XP Home edition. Please check it out.

• Have no sound after downgrade from Windows 7 to xp

  I have down graded to windows 7 for XP and now I have no sound at all what to do

  Hi FredrickPerry,

  I suggest that you download and install the audio drivers for Windows XP by visiting the manufacturer of the computer or sound card manufacturer's Web site, check to see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• No sound after the downgrade from VIsta to XP on Presario C712NR, Please help

  After downgrading from Vista to XP SP3, my C712NR lost her completely.  I can't find the driver for the conexant HD Audio SmartAMC HD2 map.  Much appreciated if you can help.

  Hello

  MS-UAA for SP2 (required with a reboot before the Audio driver and Modem) here

  MS-UAA for SP3 (required with a reboot before the Audio driver and Modem) here

  Conexant High-Definition Audio here

  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to communicate,
  Install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when it complains.
  Reset.

• XP SP3 no sound after reinstalling the operating system

  Hello

  I have re-installed the SP3 of XP on my Toshiba laptop and it has no sound after that. You may have installed the operating system in "secret" mode and so there is no sound.

  I checked the audio settings are that all settings are correct.

  Is it possible to go back again to the sound.

  Kind regards

  R

  Hi RAJRAU,

  You can try to check if the onboard sound is disabled by checking the advanced settings of the BIOS.

  If so, try allowing it and see if it helps.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also read the following article and try the steps to solve the sound problem:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-us/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• Satellite A215 no sound after upgrade to Vista o Win XP Pro

  Hi all

  I bought Toshiba notebook A215 series with Vista for 2 months. I have upgraded to Windows XP pro yesterday, everyhing looks ok but no sound. I checked the management of the material for the sound card, it seems normal.

  Someone knows this problem?
  Thank you.

  Hello

  I noticed very strange and different problems after downgrade to XP.
  And to be honest, the question of his No. is not uncommon.

  You know that some series of portable needs a special version of the BIOS after installing Windows XP or Windows Vista. It is important to use the right BIOS!

  In addition, you should be sure you used the right and compatible Realtek audio driver.
  If you need to download a new one from the Realtek page.

  Last but not least you must update the operating system to the State.
  To do this, use this MS page:
  http://update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=de-de&cm=NAV&CE=Nav2b

• Problems after downgrading my 200SP CQ61 - missing network controller!

  Hello everyone.

  I'm having problems after downgrade my Vista to XP Pro Sp3 I CQ61-200SP followed existing tuturials and they were very helpful, however I am having problems with the "network controller".

  I tried all these:

  Intel Wireless, (Note: MS Windows Installer 3.1or later, must be installed), here

  Atheros Wireless Driver, here or here

  Broadcom Wireless, here

  Realtek RTL8168C Family PCI-E Fast Ethernet NIC, here

  Realtek RTL8102E Family PCI-E Fast Ethernet NIC, here , or here

  But nothing happens! Please help me because I can not install this controller and I am unable to connect to internet!

  Message edited by zide on 15/11/2009 17:33

  Atheros Wireless here

• After downgrading to iOS Beta 10 Apple music application crashes when you try to play music

  After downgrading to iOS Beta 10 my music library Apple blocks the music application when any song is chosen.

  I tried to restart the unit, turn off Apple music in settings, turn off iCloud sync music in settings and delete music in the nursery of storage again the list of artists and albums always appears with blank cover and crash trying to read any song.

  having exactly the same problem, hated the beta, so I downgraded, music Apple if I click on the button play on anything, it crashes on me. Tried all the steps that you did as well.

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe