No sound after installing the Vista 64 SP2

Similar Questions

• HP Compaq Presario CQ61 laptop: no sound after installing the Vista SP2

  After installing SP2 on my new laptop, I found, on my version check, he did not mention SP1 as having been installed/added.

  Then I tried to UNINSTALL SP2, or take the computer to a previous restore point, as the problem of "NO SOUND" (confirmed by a small circle of Red containing a white "x" icon of speakers [IDT High Definition Audio CODEC] located at the bottom right of the laptop screen may have been caused by adding SP2 without previously installing SP1)

  .

  I discovered that there is no previous restore point (it's a new laptop) - so I can't RESTORE to AN EARLIER DATE of TIME and I have not the slightest idea how to UNINSTALL SP2 - on windows xp I could have just do it through the CENTER OF CONTROL and ease "Add or remove programs.

  • According to the Sound Devices device manager both work properly i.e. the IDT High Definition Audio CODEC and the Intel(r) High Definition Audio HDMI - although I did not understand why I have two devices here, (maybe cos I tried default return of windowsn na sound?

  I guess I could use the back to factory State cd to get her back, once again on my laptop, but I hope that I don't need to do.

  Any suggestions please, because I feel a frustrated mite.

  Hi teacher Cheryl

  Thanks for your reply.

  However, I cannot locate the page you are talking about.

  I seem to have lost in these areas (see * below)

  It seems to be all kinds of pages to do with the support of drivers, updates, but do not know which one to use to do a download of the update that I seems to require (assuming that I don't already have).

  I found what seems to be the driver of Audio concerned especially for the particular model, but do not know if it is the version of correct i.e.latest of the driver or how to download.

  The details are:-

  "The software and the following drivers are compatible with your product and the Microsoft Windows Vista operating system

  ' Pilot - AudioDateVersionPreviousSize' IDT High-Definition Audio CODEC Driver 04 - 20096.10.6159.0 A ' Version: 21,02'

  Also, when I click on "Open Volume Mixer at the foot of the screen, it says"no audio device is installed"

  * I am new to both Vista and HP Care advise and indeed on the Forum.

• Dv6-1125ee no sound after installing the Vista SP2

  As the subject says, I don't hear any noise of any program after the installation of Service Pack 2 for Vista.

  I am IDT, version 6.10.6209.0000

  I tried microsoft fix, but it did not work. I also tried to find an update for my driver, but it seems that it is the recent...

  Thanks for your help in advance.

  Solved, uninstalled the audio drivers, restarted the computer and windows automatically installed the drivers.
  Hope this helps for others.

• Problems galore after installing the Vista SP2

  Once I installed SP2 on my Acer 6920 g, my sound card no longer works. I followed the "Fix It" solution and update its drivers, which solved the problem and his return. When I stopped the machine, he started rebotting, begin a strange "xp" mode, before launching Acer Arcade Deluxe, a media programme. This problem for about two hours, stop, reboot in this program can close again in a loop on and on. Through to hold the power button on the laptop, I managed finally to get the machine to stay 'off '. The following day, when I turned on the laptop I found that repairing the system has been launched, but could not solve the problem, telling me that the problem was the following;

  Event problem name: StartupRepairV2
  Problem signature 01: AutoFailover
  Problem signature 02: 6.0.6000.16386.6.6001.18000
  Problem signature 03:6
  Problem signature 04:524296
  Problem signature 05: 0xf4
  Problem signature 06: 0xf4
  Problem signature 07:0
  Problem signature 08:2
  Problem signature 09: WrpRepair
  Problem signature 10:16385
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Can anyone help? I have an option for 'Complete restoration of Windows', but want to this only as a last resort because I do not have a backup of my files.

  Thank you

  Try this first before reinstalling.

  If it fails, see below, data recovery before reinstalling.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• After installing the Vista SP2, IE 8 does not work well.

  After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

  I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

  In addition, Live Messenger is no longer connect either.

  Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

  Hi Geekster,

  Please use the forum for Support of Vista,

  IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

  Here are the steps to uninstall SP2
  Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

  1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.
     If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. Click view installed updates.
  3. Click the service pack that you want to uninstall, and then click Uninstall.

     If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

  4. Follow the instructions that appear on the screen to complete the uninstallation.

  If method 1 does not allow to remove SP2, try different method in this article:
  http://support.Microsoft.com/kb/948537

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Will not start after installing the Vista SP2

  Last night my old Vista SP2 computer.  Installation seems to have success, but to restart the computer as part of the installation of automatic update, it failed.  During a part of the boot with a screen similar to BACK sequence, it arrested, printed a msg that appears to be in hexadecimal and would go no further.  Restart with a sequence of hot or cold start to produce the same result.  I tried to correct the problem by using the Startup Repair on the Vista installation disc and received a msg that Windows could not repair the problem itself.  I sent the results to Microsoft using this option in the Startup Repair tool.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your can fall into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  More information shows what the process that it loads.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A300 - after installing the Vista SP1 no longer start

  Hello

  I brought my Satellite A300 friends tonight to upgrade Vista to Windows 7.

  The disc of Windows 7 told me before he could upgrade the Vista would need a service pack 1, so I started to install the service pack and when he went to restart mode then it spent in step 2 restart and all of a sudden the screen went black and a load of a number appeared and it goes no further the system frozed.

  Problem now is that Windows does not start and it will not work in safe mode and I'm afraid that all my friends photo and files are now gone.

  I'm empty!

  Can anyone help?

  Hello

  Now, what happens if you try to start Windows? You get an error message or something else?

  Normally before you install something like a Service Pack or Windows 7 you must back up all the files first and this must be done at any time normally ;)
  I think you can only recover data if you put the HARD drive into an external HARD drive enclosure. Then, you can save the data on another computer.

  After that, you can do a clean Windows 7 or alternative facility. install Vista using Toshiba recovery disc, then Windows 7.

  Welcome them

• Money, stop making sounds after installing the Version sunset

  I installed the Version 'Sunset' money as a replacement for the silver Version 14.0.120.1105. It was unusable for my needs in multiple currencies, so I went back to Version 14. However, no I don't have the sound of opening session or other sounds in money.

  Is there a simple way to download the wav files and insert them into the media library, so I can enable them again?

  I'm currently under XP SP3.

  Thanks in advance.

  Hello

  See the Forums of money and support.

  Center solutions Microsoft Money
  http://support.Microsoft.com/mny

  What is Microsoft Money Plus sunset
  http://support.Microsoft.com/kb/2118008

  Money forums
  http://social.Microsoft.com/forums/en/money/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A30 - no sound after installing the audio driver

  I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...

  Thanks a lot for your time, Phill

  Hi Phill,

  First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.

  In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.

  If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.

  HTH

• No sound after installing the SP2 from Vista to window.

  I installed Vista SP2 in my computer and since then, there is no sound. Please tell us how can I get her back. Do I need to install all new updates for Vista Ultimate first before I try to get the sound?

  Hello

  Try this Mr Fixit

  http://support.Microsoft.com/GP/NO_SOUND

  And make sure you reinstall the latest Audio drivers from your computer or the manufacturer of the card its Web site.

  See you soon.

• No sound after installing Windows Vista SP2

  Vista service pack 2 and the loss of its

  Windows vista 32 bit
  I installed vista service pack 2 update and lost sound, I restored my computer to service pack 2 and sound istalling pre was there. I have re-installed now update sevice pack 2 and its missing again. It's the same with service pack 1 and I had to restore my computer to factory settings to retrieve the sound. I really don't want to have to do it again.
  I tried the microsoft fix that says everything is fine. I've done all the things suggested on troubleshooting audio from vista - still no sound. My internet explore keeps reloading when I don't have service pack 2 installed.
  What can I do to fix this?

  Like Nettie63, after SP2 has been installed, my sound on the left and the utility 'fix it' said everything of fine.  I tried the fix above with the research of STacSV64.exe that by pasting into the search bar.  However, he said that there was no file so I couldn't just double-click on it.

  What do you recommend?   Thank you very much.

  =====================================
  Have you tried all the suggestions in the following articles:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (948491) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  (948465) information about Service Pack 2
  for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After installing the Vista SP2 on a Compaq Presario laptop it freezes and runs slow.

  Very slow Windows 'Welcome' after the access code to fully ready. Applications freezes (message "not responding"), and then continue. Do not have this problem before you install KB 971029 (Vista SP2).

  1A the free trial period of NIS already expired by the time where you installed McAfee Security Center?

  2. do you (a) uninstall the NIS free trial AND THEN download/run the Norton Removal Tool (c) b until you have installed McAfee Security Center?

  ============================

  Assuming that your responses to #1 and #2 are the two no....

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• PC shutdown after installing the Vista SP2

  I could not read the message whenever this happened because my PC stops automatically, this never happened until I installed SP2. I couldn't install it before until I released the space by moving thousands of videos on a 2 TB hard drive. So what is happening with that and SP2

  * Title *.
  Your current settings are not after the installation of service pack 2

  justinrpg7,
  Use the Advanced startup options , and then select the option 'Disable automatic restart in case of system failure'.  Then the next time it fails it must stop on the error screen.  Post back with the error message so that we can discuss this more.  You can clean boot your system to see if there is a program, possibly the origin of the problem.  You should also test in Safe Mode and see if it happens then. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300 (PSLB9A) - no internet access after installing the Vista SP2

  Just upgraded my Vista with Service Pack 2 and found that I can not connect to internet sites, have proved SP2 by rstoring to before SP2 and everything is OK, also reloaded the OS with my recovery disks and everything works OK... to - what I load SP2 then when I try to access the internet, I can't , get "IE cannot display the webpage".

  Diagnosis don't report any problems found. This happens with IE7 or IE8, the firewall is off and I can reach any network device, including my server but I am unable to load the web server page, same problem...

  Any help would be appreciated.

  Pete

  Hello

  I googled a bit and found a lot of people who reported on the same issue.
  It s certainly related to Vista SP2.
  You said you used Internet Explorer, I think you should test this also using other browsers like Firefox, Opera, etc.

• No sound after installing the driver on windows 7

  I installed on my computer and when I install Windows 7 Ultimate all my drivers except for the sound. I have a Sound Blaster Live sound installed card and I found a driver for it, the driver is installed but there is still no sound and windows tells me there is no problem. Please help in any way. the driver that I use is a Vinyl AC97 Codec Combo Driver.

  Hi gnuttyone:

  Please check this:

  Select Control Panel > under sound select manage audio devices > see if "Speakers" have a green check mark (designates the default setting).  If another audio device is enabled, try checking "Speakers" and set as a default device, then click on apply.  See if it works then using these card drivers the Win7 built-in.