No sound after installing the driver on windows 7

Similar Questions

• Blue screen after installing the driver for windows phone 7

  Hi all

  I installed the new version of Zune. When I connect my Windows 7 phone (HTC Mozart) to my computer (Vista SP1), the driver will install automatically. After that, he tells me to restart. When I do this, and when windows starts again, theres a BSOD with the following message:
  Driver IRQL not less or equal
  This only happens when I installed the driver for my phone.
  Once windows restarts and gets me to error checking etc and after that, it tries to start Windows again go through the process of "update configuration". Naturally the updates are not properly configured, and it restarts and tries to restore changes. This pretty much goes in a loop forever, until I restart, run in safe mode.
  I have no idea why what is happening, and search on Google did not help so far. Any help would be appreciated.
  Thank you.
  Euler

  The minidump files show the recent errors are errors IRQL_NOT_LESS_OR_EQUAL (a) and the cause of the error is OA001Vid.sys.

  The OA001Ufd.sys also seems to be involved in the accident.

  These two drivers seem to be the drivers for the integrated webcam.

  What you might try is the next update for the webcam to the laptop:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R213648&SystemID=STUDIO1737&servicetag=&os=WLH&osl=en&deviceid=16027&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=0&libid=17&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=302206

• Cannot install the driver for Windows Phone 7

  When I connect my Nokia Lumia 800 to my PC via USB, phone charges, and pilot the Software Installation icon in the lower corner of the screen indicates that the drivers are being found and installed.

  After a few minutes, what it says; "The software for this device has been successfully installed. Windows Phone 7 - finished, reboot required. »
  So I continue, and restarting my PC, when it restarts the Software Installation icon appears again and begins to reinstall the driver, and then tells me that a restart is required.
  Whenever I restart my PC to complete the installation, the installation process again, so I guess that the driver is eliminated during the restart?
  I haven't restarted my PC about 20 times, and every time it starts the process and invites me to restart.
  I checked the Device Manager before I have restart and it sees driver WP7 but with a yellow triangle, after the reboot, the driver is so more on the list until the icon to install the software driver in the bottom of the screen indicates that the drivers are being found and installed. And the cycle continues.
  Can anyone give me advice as to why my PC will not finish restarting after installing the driver?
  Thank you, Justin Glass

  Hello JustinGlass,

  Thank you for the question!

  I'm sorry to know that have problems you with Windows Phone 7 driver. As I understand it, you can not driver install Windows Phone 7.

  Perform the steps in the link and check.

  What to do when a device is not installed properly(Windows 7) 

  Note: Also applies to Windows Vista

  Answer to us if you are having problems with Windows 7 Driver or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• After installing the drivers for windows 7 ultimate, 'Unknown device' is still on my DV7-7003tx?

  I recently installed windows 7 ultimate after formatting the drive. Then downloaded all the drivers from the Web site list. but still a "peripheral Unknows" remain in Device Manager. What could be this driver? I installed Support help, he couldn't do anything either.

  Any help is greatly appreciated

  Thank you

  Right click on the device in Device Manager, click Properties. In the window that opens go to the Details tab, use the menu selector drop down to choose the hardware id. After the first string of numbers you get.

• 500 error after installing the CF on Windows Server 2008 IIS7 9.0.2

  After installing the CF 9.0.2 on Windows Server 2008 with IIS7, I get an error 500 return of all my websites.  I made sure to change the permissions in the C:\ColdFusion9 folder to full control for psaadm, psacln.  I'm sure that CGI, ISAPI extensions and ISAPI filters are installed.  I rebooted.  I can access the administration of CF on the server, but all of my websites are generating 500 errors on remote browsers.  The uninstall does not solve the problem.  Help, please.  What can I do?

  Problem solved!  It was related to incompatibilities of 32-bit/64-bit with Plesk.  There are two steps to solve this problem:

  1 snap the Internet Information services manager, access the properties of the advanced application pool and enable 32-Bit Applications 'false' for plesk (default) (2.0) (pool) value.

  2. in Plesk, disable the Web statistics (accessible via password protected directory ' / plesk-stat/webstat /')

  Note that you will not be able to use the functionality of Plesk protected directory until Plesk solves this problem.

  Complete in writing to the top of the solution by AndorA in Plesk forums can be found at: http://forum.parallels.com/showthread.php?t=262903

  Andor thanks!

• Satellite A30 - no sound after installing the audio driver

  I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...

  Thanks a lot for your time, Phill

  Hi Phill,

  First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.

  In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.

  If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.

  HTH

• HP Compaq Presario CQ61 laptop: no sound after installing the Vista SP2

  After installing SP2 on my new laptop, I found, on my version check, he did not mention SP1 as having been installed/added.

  Then I tried to UNINSTALL SP2, or take the computer to a previous restore point, as the problem of "NO SOUND" (confirmed by a small circle of Red containing a white "x" icon of speakers [IDT High Definition Audio CODEC] located at the bottom right of the laptop screen may have been caused by adding SP2 without previously installing SP1)

  .

  I discovered that there is no previous restore point (it's a new laptop) - so I can't RESTORE to AN EARLIER DATE of TIME and I have not the slightest idea how to UNINSTALL SP2 - on windows xp I could have just do it through the CENTER OF CONTROL and ease "Add or remove programs.

  • According to the Sound Devices device manager both work properly i.e. the IDT High Definition Audio CODEC and the Intel(r) High Definition Audio HDMI - although I did not understand why I have two devices here, (maybe cos I tried default return of windowsn na sound?

  I guess I could use the back to factory State cd to get her back, once again on my laptop, but I hope that I don't need to do.

  Any suggestions please, because I feel a frustrated mite.

  Hi teacher Cheryl

  Thanks for your reply.

  However, I cannot locate the page you are talking about.

  I seem to have lost in these areas (see * below)

  It seems to be all kinds of pages to do with the support of drivers, updates, but do not know which one to use to do a download of the update that I seems to require (assuming that I don't already have).

  I found what seems to be the driver of Audio concerned especially for the particular model, but do not know if it is the version of correct i.e.latest of the driver or how to download.

  The details are:-

  "The software and the following drivers are compatible with your product and the Microsoft Windows Vista operating system

  ' Pilot - AudioDateVersionPreviousSize' IDT High-Definition Audio CODEC Driver 04 - 20096.10.6159.0 A ' Version: 21,02'

  Also, when I click on "Open Volume Mixer at the foot of the screen, it says"no audio device is installed"

  * I am new to both Vista and HP Care advise and indeed on the Forum.

• Dv6-1125ee no sound after installing the Vista SP2

  As the subject says, I don't hear any noise of any program after the installation of Service Pack 2 for Vista.

  I am IDT, version 6.10.6209.0000

  I tried microsoft fix, but it did not work. I also tried to find an update for my driver, but it seems that it is the recent...

  Thanks for your help in advance.

  Solved, uninstalled the audio drivers, restarted the computer and windows automatically installed the drivers.
  Hope this helps for others.

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Money, stop making sounds after installing the Version sunset

  I installed the Version 'Sunset' money as a replacement for the silver Version 14.0.120.1105. It was unusable for my needs in multiple currencies, so I went back to Version 14. However, no I don't have the sound of opening session or other sounds in money.

  Is there a simple way to download the wav files and insert them into the media library, so I can enable them again?

  I'm currently under XP SP3.

  Thanks in advance.

  Hello

  See the Forums of money and support.

  Center solutions Microsoft Money
  http://support.Microsoft.com/mny

  What is Microsoft Money Plus sunset
  http://support.Microsoft.com/kb/2118008

  Money forums
  http://social.Microsoft.com/forums/en/money/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet 4630 is unable to install the driver. Windows XP Sp3

  Good evening

  I bought this printer earlier today and a few hours already on this issue. The box is not too far away, and the printer could come back soon!

  The printer works fine, it was connected to my router, the light is always on, it says connected to the wifi system. Print the confirmation of wifi connection page, everything is 'Success'

  My problem is that whenever I try to install the drivers, the research of setting up a printer that is connected but not yet installed. He notice my printer with the right ip address, then copy the driver of a couple files and then tells me it is unable to install the printer.

  The current configuration is OJ4630_198, I found an older version and tried it but roughly the same results, except that before it stops the installation telling me he fails to do so, it asks me to locate the HP CD on my cd player, looking for a fax facility facility .png but fails a second later.

  I am naïve enough, I tried to install it manually, but of course the Communication Port is a little tricky with a wire less printer.  I noticed there's a selection of "Create a new port" available in which appears an option named "Hp discovered Port Monitor (HP 4630 series)" which curiously is my new printer. Tried but it doesn't work.

  I reset my router and printer, pc several times, tried to assign my printer to another port number, all ended with the same results. It connects to my wifi, but I can't seem to install the printer driver.  So my list of printers is empty atm...

  Thanks for any help,

  Very appreciated

  Windows XP Sp3

  Cisco router

  ZoneAlarm firewall...

  Well, problem solved.

  It is indeed a Windows problem.

  Thanks to SAM from live chat assistance, he noticed the HP Installer wasn't working, so we tried to manually install the printer with the tcp/ip Protocol and former driver windows Xp Announces (deskjet 990c) who worked...

  I hope that everything is still functional. But Kudos to SAM for a helping hand.

• No power/energy management Lenovo after installing the driver?

  My laptop is X 1 carbon, on Windows 8. I installed geku18ww, Lenovo Power Management Driver for Windows 8. But I can't launch the software to change the battery settings. What is the reason? Thank you!

  Hi, yangxie

  I'm not sure why this feature was removed, but I was able to find a thread here on the Lenovo Forums which should provide assistance. A user on the forums, wsko, was able to change some registry values to manually set some values to get a battery threshold that works for him and others.

  Another possibility is to try to install the Lenovo Power Manager in a Windows 7 compatibility mode. Other users have done, as indicated by DAF in the thread above. You can find instructions for this method here on the Microsoft Support site.

  It will be useful,

  Adam

• Why can use a webcam to U2-EE not after installing the driver

  I Recemmenr broke my webcam logitech for $20 and got a webcam Slick U2 - EE no disc to insert, just plug your base in and he takes off. Well the driver and everything installs and even appears in the printers and peripheral area. But I can't find a way to use it after this point. Any help would be appreciated. Rodney

  You will need an application that uses the Webcam like Skype or Yahoo messenger.

  Logitech applied its own software to use the webcam.

  You can also check with the manufacturer of the webcam Slick.