No sound from my stereo speakers to monitor. I checked the settings and volume?

Similar Questions

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• Satellite A505-S6973 - no sound from my laptop speakers

  I have an A505-S6973 and today I lost volume on my speakers. When I took my headphones, I hear, but without the headset is plugged in, I have no sound from my laptop speakers.

  I checked the Manager of devices for software problems but everything is erased, also, my volume is completely on.

  I tried a restore, but in vain, as I tried to uninstall and reinstall the extra value package but when you try to run the software after extraction it an error [0x8146045B] reports itself.

  This morning, everything seemed to work fine, the only thing I can think, I removed my places of sharing network of windows media.

  If that's the culprit can someone guide me on how I can re - install. In addition, value added package question, is there something that can be done, because the buttong enable/disable touchpad when press nothing happens, but if I use the function with F9 key it activates / deactivates.

  I really hope someone can help me, apparently, that it is an unlucky weekend for me.

  Hello

  Have you tried to reinstall a sound card driver? If you have not it, try it...

• I can't hear any sound from my pc speakers, CD, dvd, buzz to yahoo messenger or nothing.why?

  I hear no longer sounds from my pc speakers. my cd of my dvd or my yahoo Messenger buzz alert same sounds.not music that is on my pc.why?

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows>

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems>

  UTC/GMT is 11:22 Friday, January 20, 2012

• How can I fix the speakers on my Asus laptop? I played with the settings and accidentally deleted some functions.

  original title: speakers on windows 7

  How to fix speakers on my Asus laptop. I played with the settings and accidentally deleted some features and I can't restore it to its original.

  Can you help me with this problem?

  Thank you in advance.

  The best

  YinNooy

  Use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.

  I hope this helps.  Good luck.

• I deleted the files from my office, they are still there and I can't delete them again cos keep telling me to check the location and try again

  I deleted the files from my office, they are still there and I can't delete them again cos keep telling me to check the location and try again

  Hi fwhaddad,

  Please take a look at the spirit x possible 2nd answer in the thread for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/cant-remove-a-folder-because-its-not-there/eba2d232-33d7-43BD-a3dc-1f06292552b2

• If I buy acrobat from a party private how can I check the status of liscense before buying?

  If I buy acrobat from a party private how can I check the status of liscense before buying?

  1. you can not.

  2. There is a lot of product counterfeit around, even though the seller did not know.

  3. If you do not purchase be sure to get a form to "transfer license" filled in the seller otherwise they maintain (and have not sold) the rights to run the software.

• The site Web from Adobe won't let me go to the cashier and pay after the lightroom update option 5.

  The site Web from Adobe won't let me go to the cashier and pay after the lightroom update option 5

  Use another browser or delete your adobe.com cookies and try again.

• No sound from headphones, internal speakers but continue to make sound

  I use a HP with Windows Vista Premium. My computer quite aware that my headphones are connected, will play the "ding" sound through the headset when I run the test, and many of the sounds of Windows Basic (for example, the volume control) work with the helmet. However all other sounds (such as music, internet, games, etc.) do not play in my headset but my speakers instead. I tried the solutions found on the forums, but ultimately neither my headphones or the speaker worked so I tried a system restore, and Im back where I started, speakers are working but headphones don't while headphones are connected. How can I fix? Any help would be greatly appreciated, thank you.

  Hi AMcKeown

  Thank you for visiting the Vista Forum.

  Are these USB headset or headphone jack analog standard?

  Are plug you into the headphone to the front of the computer or the rear (according to the model of CV, you have, it can be taken helmet two, one in front and one in back)-If you have one in the front and you use that one, the cable that goes from this Jack to the Audio card can be loosened.  Please consult your manual or the owner with HP support assistance on verification of this cable.

  If it is a set of USB headset, make sure that the drivers are installed and up-to-date and compatible with Microsoft Vista.

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• For no reason I can understand I no longer have sound from my PC speakers. What should I do to check where is the possible fault?

  Can what information I add. IT IS THERE IS NO SOUND ON MY SPEAKERS?

  Do not yell (caps).

  Re-install your audio drivers, make sure that the speakers are plugged into the correct socket and are turned on.

  Re-post if the problem persists much more information - such as the n0 of brand, giving the name and model of your machine.

  See you soon,.

  Jerry

• Why portable speaker or a headphone no sound despite all the settings and the audio devices work correctly? Please advise, thank you very much!

  Sound and audio drivers have been updated as well as volume was operated at the level of 80% and yet it was not all audio playback of stereo Laptop speakers or earphone.

  Hello

  Did you change your computer?

  If you use windows7, I suggest you to follow the steps from the links and check out.

  Audio playback convenience open

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Monitor, alternating between automatic adjustment and volume 0

  I have a HP w2207h monitor. It is as the decrease in volume control button is stuck and select auto menu setting button are both blocked on constantly. I can get to the menu if I pressed for a while and catch a cycle where it is not constantly try o lower the volume. I'm sorry if things are spelled wrong in the middle of the page, but I do not see in the middle of my page. f I press and hold the menu I can do go to OSD lock screen that blocks a smaller amount of the screen. Any ideas on how to make this stop? It is only hung a HP Pavilion desktop that was purchased with it as a package. When I am able to select menu it scrolls continuously downard as if the lower volume button is depressed, but I can press the button and click.

  OK if I jam a clip in the volume up button it seems to cancel the low volume button and hold it just constant. No bike back from now on.

  Well that does not really solve it either.

  He started to cycle upward instead and change the video settings. Then when I removed it went all of following what he did before again. Volume to zero is displayed and then bike auto adjustment in progress again and again.

  Message edited by wrightme43 on 01/10/2009 18:31

  Somehow, the problem has to do with the HD input on the screen sheet.

  It will go all fuzzy, with digital static. If I put the HDMI on the PS3 in the CAP and then attach attach it to the monitor cable and pull just right to stop that and other issues.

  Basically a manufacturing defect which is a common problem with this monitor in my opinion. I am extraordinarily cautious with caps, has worked with sonar on nuclear submarines and I am certified as well, ESA bascly no ham handed. HP, I'm sure that designed a great product, but manufacturing leaves much to be desired.

  In any case, the solution was to put on the cord HD just against the monitor cord and which eliminates all problems and has worked well for weeks now with no other problems that the cat hit the cord and it goes right back to jump back, then with static and blurred.

• Updates from HP agent... always began in the early and slows down computer

  HP Pavilion a1222n, Win XP Home

  When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

  I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

  Thank you

  Ron3033

  Hi Ron,

  Try the following.

  Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

  Kind regards

  DP - K

• my monitor displays properly, the blue and yellow lines horizontally and vertically on the screen

  monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen

  Hello

  1 did you changes to the computer before the show?

  2. the make and model of the computer/monitor?

  Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.

  Method 1:
  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960

  Method 2: Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

• On Windows 7 upgrade from vista 64 bit stops after that it says the settings and files of collection

  I am tring to install Windows 7 upgrade from vista 64-bit.  I'm to the point where it says collect files and settings, and it stops running, and then in the details it shows 3 files located in the c: users\my name\appdata\local\temp\WER followed by numbers.tmp, then version, appcompat or mdmp. (example: wer5090.tmp.version.txt)  He said that these files are the reason. Any ideas how to solve this problem?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  If the upgrade continues to fail, you might want to consider doing a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/