No sound if a midi keyboard is pluged

Similar Questions

• How can I download more sounds to be used with a MIDI keyboard?

  In my class of contemporary music at school, we used a little Garageband and there was a lot more categories and sounds to play with the MIDI keyboard. I also want more sounds, particularly the category of instruments in the world that I have not the 10th of Garageband, the same used copy to school, I tried to restore Sound Library several times and there is no change. So far, I have 14 categories for instruments and there was much more to my school.

  Thank you!

  The world instrument sounds are part of a Jam Pack. The metaoutil must be purchased at eparately, but is more sold by Apple. You can buy however by purchasing Mainstage. It will be install all the Jam Packs five inthesame folder, where the sounds of GarageBand are installed, so you can use tem with GarageBand.

• Very important question! Why my Apple wireless keyboard better and much stronger than my midi keyboard?

  I have a Yamaha psr-330 midi keyboard

  I have an Akai mpk261midi keyboard

  I have an Alesis v61 midi keyboard

  they all sound the same in Logic Pro X, I can barely hear the sound of the piano, the pressure sensitivity is out of whack, I basically just plug and play midi keyboards and use software instruments without changing anything in Logic Pro X... why does my little Apple Wireless (bluetooth, remember) clearer keyboard better, more responsive and much stronger than any general midi keyboard? its embarrassing to say the least!

  I have the volume to the maximum one time and even raised the gain on the software instrument "Piano Steinway tail" and still barely, I could hear a noise...

  Please help me I have no other solution... IV ' e tasted its best thanks to a computer keyboard dang, how is this possible?

  How can I get my midi keyboards sound as good as my computer wireless keyboard?

• How to connect an old Fatar SL880 Mid-keyboard directly on a mac?

  Hello world

  I inherited an old midi keyboard Fatar SL880. There is no USB port, only two midi-out. I would like to connect directly to a mac and do work with some sounds. Does anyone know how to do this please?

  Thanks for your time,

  Richard

  Post edited by: blaneyart
  Sorry, I made a spelling error that would have changed the meaning of the question, Richard

  two outputs to midi? or an output midi and mid in?

  device & http://www.Sweetwater.com/Store/Detail/MIDIExpand?adpos=1O1 & Creative = 55226083081 c = & matchtype = & network = g & gclid = CMbllNaUqM4CFYiBfgodzK0Aig

• I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device

  I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.

  You can not.

  You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.

  MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.

  See you soon,.

  Jerry

• can I play the guitar and midi keyboards at the same time?

  IM using the 3 main stage, I would like to play guitar and midi keyboards at the same time. I know that I can have more than one keyboard will at the same time, but I can't understand how to play the guitar too. I use a core Alesis 1 plug the guitar and a Keith McMillen 12 Step midi controller, he reads both just fine alone, but they play together. How can I get there? In addition, Im using a MacBook Pro OS X El Capitan.

  Thank you

  Mike

  You add a bunch of audio channels and affect the Core 1 Alesis entry?

  

  

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• How Casio CTK 710 USB MIDI keyboard work in Windows Vista?

  Original title: Vista compatilbility issues

  How do you solve compatibility Vista to Casio CTK 710 USB MIDI keyboard?

  Hello

  1. He worked in the earlier version of the operating system?

  It may or may not work, but you can try to download and install drivers XP for Casio CTK 710 USB MIDI keyboard and run them in compatibility mode and check if the problem persists.

  If the problem persists, contact the manufacturer to better help.

• Sound keys on the keyboard do not work

  Original title: keyboard windows 8

  the sound keys on my keyboard don't work

  Thanks for your reply pinaki Mohantry but I solved this problem by going to the services and put the human peripheral interface to automatic and the problem is solved.

• For MacBookPro vintage keybord Roland MIDI keyboard driver

  Hello to all the Apple community,

  With apple for years, I'm currently looking for solutions match my vintage midi Roland Keybord

  for my MacBook Pro to play in garageband.

  This midi Roland Keybord is a vintage model (90 or less)-c' is the KS Pro 88 model.

  Professional and full of incredible sounds. He used to work until I changed the OS to El Capitan.

  Apple is full of solutions and the amazing community members. Maybe you have a few pieces of advice or solutions,

  This music instrument of Roland to Apple links, I'll be recognizing and rewarding for those who have the key to this.

  Spend a beautiful summer, looking forward to reading you

  Best

  Niko79

  Hey there Niko79!

  Welcome to Apple Support communities, and one was happy too! GarageBand is an amazing place where we can all get creative and publishing wonderful content. I, too, have an amazing keyboard. Mine is an older Yamaha that I tried to connect with my Mac. In most cases, all that is needed is an update of the driver from the manufacturer. Here is the GarageBand help information:

  Be sure to follow the instructions supplied with the keyboard, which may include the installation of the driver appropriate to your computer. Check the Web site of the manufacturer for the latest version of the driver software. If you are using a MIDI interface, remember to follow the instructions provided with the interface.

  Due to the specificity of your device, the best solution would be to join Roland Support to confirm if such update is for OS X 10.11.6 El Capitan.

  Roland support

  Best regards

• MIDI keyboard entry out of semitone (gray 3/oxygen 49 MainStage)

  Having a problem where my midi controller (version M-Audio oxygen 49 gray) is read by MainStage 3 (3.2.4) half-step out (C3 poster and sounds like B2, D3 as c# 3, etc.).

  13 "MBP running 10.10.5, 2.7 GHz Intel Core i5, 8 GB RAM, 128 GB solid state

  Function "Patch transpose" MS is set to 0

  Setting is at 440

  44.1 sampling rate

  It happened all of a sudden and applies to all saved concerts as well as newly opened empty concerts. Music entry is read correctly. The keyboard is equipped with no hardware to adjust the setting or the sampling frequency. It was working fine until this point. Any help is greatly appreciated!

  You have another audio application running? Already happened when I opened the logic, which was fixed at a different sampling rate. Try closing all applications, to reopen the MainStage and if the problem persists, open the MS preferences and change the sampling frequency.

• Why can't get my Midi keyboard a touch ION 49 to work with windows 7

  Now, I tried a few weeks to get the window to see the keyboard with various music software.

  I plug it via Midi or via the usb port and it will not appear as a DVICE connected to my PC.

  There should be no plug and play no need for drivers of devices

  Any help would be appreciated.

  I have installed and reinstalled the software and even tried to connect to a laptop without a bit of luck.

  I know that the device works because it was connected to my brothers PC!

  have concert of window 7 4 RAM and a 500 GB hard drive.

  Thank you

  George Henshaw

  Henshaw

  So, what software are you talking about?

  You realize that you will need a DAW and a soft-synth to use the keyboard without a Midi sound Module?

  If W7 does not recognize the keyboard here is the dramatic thing to make last ditch attempt.

  Go into Device Manager and uninstall all USB ports. Then restart. Let W7 do its thing and then connect the keyboard. He finds? BTW, doing this means that if you have any other USB device, you must let W7 "drivers".

  See you soon,.
  Jerry

• software midi keyboard?

  Hi, is there a program I can use to play a keyboard usb Akai through an imac g3 with 10.4?  I need love features as Ableton Live provides - just a way to make his background!  Thank you!

  Hi Radford,

  You probably already have it...

  In utilities > Configuration Audio and Midi > Midi tab, see if you can set up there.

• Sound buttons on the keyboard no longer works.

  Three weeks ago, I bought a HP desktop computer... and on the keyboard there are buttons that enabled me to turn OFF the sound, or to increase or decrease the volume. They worked very well... but my computer did an update from HP yesterday and now these buttons do not work. How can I enable the use of these buttons back?

  HP update was the installation of quick start HP on my HP Pavilion PC WE p7-1534

  I just need to uninstall the HP Quick Start application?

  ERICO said to go ahead and uninstall HP Quick Start... which I did and then rebooted my system and now the sound buttons work again.

  Thanks Erico

• Any VST to record a MIDI keyboard/drums in Live Band

  I need to record a live band which has a keyboard MIDI and MIDI Drum Kit. Is there any VST which can do this, as noon is no longer supported in to THE. Thank you.

  "The two - following one another. No mechanism is available in VST format for this - that's why there aren't any. »

  Thank you guys for all the 'NO', but I used Legree VST and it works very well, sorry.