No sound on Satellite Pro U200 in WXP Pro SP3

NO SOUND IN WINDOWS XP SP2 OR SP3 WITH ANALOG DEVICES AD1981HD, MATERIAL IS PROPERLY CONNECTED DISPLAYS BUT DOES NOT WORK. THE ŒUVRES OF FINE BUT SPEAKERS AT POST IF I PRESS F1 IT SOUND THE TYPICAL "BEEP".
I SAW MORE PROBLEMS IN THIS FORUM, BUT WITHOUT FINDING ANY SOLUTION, PLEASE HELP. (THE BEST IN SPANISH), I DO NOT SPEAK ENGLISH.

Thank you

Hello

> THE ŒUVRES OF FINE BUT SPEAKERS AT POST IF I PRESS F1 IT SOUND THE TYPICAL "BEEP".

This beep comes from the other speaker that indicates the BIOS beeps if an error was detected during the POST (power on self-test).
But this has nothing to do with the sound while running a Windows operating system.

In my opinion, you should first check if the sound card has been properly recognized in Device Manager.
Also an update of the sound card driver is not bad. Then download the audio driver from the European driver Toshiba page and reinstall. But before you relocate his new driver you must uninstall the old driver (can be done in Device Manager).

Last but not least, I would recommend checking the sound settings in the control panel-> sound & audio devices. So dumb check was not enabled and if the other volume control is set to a higher value!

Tags: Toshiba

Similar Questions

  • No sound on Satellite Pro U200

    Hello I n t have sound on my Toshiba U200.
    Pleas help! Each setings are Ok.

    I installed new Xp but no sound

    I guess that the Vista is preinstalled on this laptop. Am I wrong?

    Are 100% sure you used a good XP audio driver?

  • No sound on Satellite Pro A120 with Windows Vista

    Hello

    I had to reinstall the Vista operating system and rebuild my Satellite Pro A120 from the revovery disk.
    Most of the things are fine, but I can't any sound to speakers of jack headphine.

    I checked said etil Realtek High Definition Sound Driver is installed and working properly.

    My volume buttons are up on the mixer and Windows Media Player.
    The driver is Realtek 6.0.1.5317

    Help would be appreciatesd

    Hello

    Please take a look here:

    + Audio cut off (no sound) after you install Windows Vista +.
    http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

    There is a tool that allows the sound again once it seems s Cup...

    Welcome them

  • No sound in Satellite Pro P200 with XP

    Hi all.

    I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

    I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

    PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

    I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

    Any idea?

    Thanks in advance.

    Hello

    > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

    You're on right way boyfriend, you must also install another patch MS; KB835221
    So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

    The problem is that this unit only works in Vista.
    The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
    It's quite new technology designed to support the new features of Vista.
    There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

    Hope I could help you

  • No sound on Satellite Pro P100

    Hi all

    does anyone know how to get the sound on your laptop. I have a new Toshiba Satellite pro P100 with Windows Vista. I have no sound after installing Service Pack 1. But my speakers are turned on, and I see the noise level through control system / sound /.
    Speaker test does not work. There is no sound on my headset too. Any help will be appreciated, would be well as soon as possible.

    -Axel

    I always use my laptop without SP1 and have no such problems.
    Have you tried to install the latest version of the driver sound Toshiba support page?

  • NO sound on Satellite Pro with Win XP - SOLUTION

    No sound with Toshiba Satellite Pro
    This did it for me (Windows XP)

    -> Control Panel - icon Speech - Audio output
    -Select an output that indicates normal mode
    -Realtek HD Audio Black ie printing output.
    -Click on the Volume.
    -Ensure that no box is cut

    Hello

    Thanks for sharing.
    This means that you simply disabled mute ;) and the sound didn t appear because she was mute

  • Virtual sound on Satellite Pro A100 problem

    Hello.

    I have the Satellite Pro A100 (PSAAC) "PSAACE - 00200DG 3"with Windows XP."
    I recently formatted my hard drive and run my Toshiba Recovery CD. Everything worked very well. As I downloaded the latest drivers for my computer including the Toshiba Virtual Sound drivers. After I deleted the old Virtual Sound driver and started installing new version of same message appears "Toshiba Virtual Sound can't stand your computer."
    Then I tried to install a later version of the same thing that was on the recovery CD and I would get the same message again. Moreover, after any new installation of Windows XP, Virtual Sound works OK. Please someone had the same problem and could you give me a solution.

    Thank you!!!

    Have you downloaded the right version? I mean the version for your model of laptop (PSAAC)?

  • Sound on Satellite Pro A30 plays very well, then disappears

    A satellite Pro A30 for two years. A few months ago, the noise began to cut. It always returns when I reboot or restart. And sometimes, he remains well overall!
    I tried reloading Realtek program but that didn't make a difference.
    Also recently subscribed to iTunes and wonder if it is to have an effect?

    Any help much appreciated

    Hello

    The problem occurred before that you subscribed to iTunes?
    Maybe a 3rd party software has a bad influence on the sound properties?
    It's not easy to say why it happens because we don t know what you have installed on your laptop.
    However, you should check the Toshiba driver download page and here, you must download and install the driver of his most recent.
    Check also the AC97 Audio configuration in Control Panel.

  • No device mixer active found - lost my sound on satellite Pro A100

    I need advice/help on how I can restore my sound.

    I have a series of satellite Pro A100 PSAACE-007002EN and lost my sound. I may be deleted to do a check for spyware AOL and does not give me the option to save the file.
    All I have is the departure of sound for windows and if I am on msn and I am invited to speak while the sound is given, too. I lost the notification sound on my aol opening of session and closing session and email notification. I don't hear sound not play my music either.

    Hello

    I recommend you to roll back the OS to the beginning.
    You can use the system restore which is part of the Windows operating system.
    I guess you have removed or replace some settings or files and restoring the system must bring these parameters at the beginning.

  • No sound on Satellite Pro 6000

    Hello!

    I have a problem with my sound on a satellite pro 6000.
    my rather is an audio Ali and is properly installed. (you do see something no yellow icon ore.)
    I also installed the device and rebooted the computer, but nothing happens.

    When I check my helmet on my laptop, I hear nothing.
    Can someone help me? Thank you.
    Greetz,

    Dominique.

    Have you checked the volume control on the side of the laptop?
    Yes, this seems very simple, but you can not believe how many people forget o activate this option.
    How about "Mute" settings?

  • No sound on Satellite Pro A100

    I'm a complete novice - I have a Satellite Pro A100 - portable PSAAPE

    It says it has a sound card, but I'm not all the sounds of him

    I tried following the resolution of the problems, but I still can't make it work

    Any advice appreciated

    John

    Sorry, but you can specify your problem more exactly. I mean, sorry, when I tell you that my car do not drive - do you know where is the problem? ;)

    So what I need to know is:

    -which is the OS installed?
    -the fact that you have installed the latest drivers?
    -have you ever tried to get your machine?
    -Since when the sound has stopped working?
    -a made his work before?
    -the fact that you have installed recently a few new pieces of software?

    If you can give me more information on this subject that I can maybe help you...

    Cheeers

  • No sound of Satellite Pro A120

    Hello

    I recently lost all sound on my Satellite Pro A120. I am running XP SP2 and tried to uninstall and reinstall the Raltek drivers. Before that I went through the windows help program, but that only told me that everything was working fine. Can someone help me please.

    *@Allen237*
    Tecra 9100 is oldie! Don t compare this notebook with a series of Satellite A120.
    The sound does not work because the Yamaha audio driver does not support the Microsoft SP1 and SP2! This is the reason!

    *@jeffjames*
    To get the sound on the XP all Microsoft patches and hotfixes must be installed! Use the MS update page to get all the updates!
    Very important are the audio patches; KB835221and KB888111

    Remove all audio drivers, install patches and then after restart the compatible audio driver!

  • No sound? XP Pro/SP3 Sound Blaster.

    No noise, the error message / 0 X 88780032 DirectSound Driver not installed. I have a sound blaster external MP3 + Digital audio enhancer installed, works well for several years. No changes? I uninstalled the software and reinstalled and updated the drivers. Multimedia Audio Controller also looked in system information, not installed driver. Is their a default for XP PRO/SP3 audio driver? Don't know what to do from here?

    Hi Joeman49,

    What is the number and the model of the computer?

    Method 1: Try to install all Windows updates and check for available question. To do this, follow these steps:

    a. Click Start, all programs and then click Windows Update.

    b. click Find updates on the left of the screen.

    c. If updates are available, go ahead and install them.

    Method 2: Follow the steps in the below links:

    1 solving Audio problems in Windows:http://support.microsoft.com/gp/troubleshoot_audio_windows

    2. how to fix sound problems in Windows XP:http://support.microsoft.com/kb/307918

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I cancelled driver sound in Satellite Pro M70

    Help!
    WITHOUT DOUBT, I CANCELLED THE AUDIO OF MY SATELLITE M70 DRIVER.

    WHAT CAN I DO NOW?

    Please let me have a swer soon!
    Thank you

    Hello

    How about new installation of driver sound?

    You can find the drivers for Pro M70 on the European driver Toshiba page.

    http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

    But to be honest I don t understand how you managed it.

  • How can I add a stereo or mono mix to the sound engineer - Satellite Pro A100-196

    I can't find this option in my settings of the sound, no mono or stereo under record?
    is it possible to add this feature to my laptop?
    or is it possible to do to the sound settings to make them?

    Hello

    Can you please tell us what how you save the music? You want to import from an external device? If so how is it connected to your laptop?

Maybe you are looking for

  • OSX installer

    I want to create a bootable Installer for OS Yosemite. Reason being, I want to install a new SSD for my 2009 macbook pro. Mac support saids to download the OS X from mac app store? I can not find? also where is the creatinstallmedia in the terminal?

  • premanently store this exception is inactive

    The problem is that I can't save the security exception because the box is inactive. I know that the certificate provider, and it's OK. How can I unlock this option and make it active to save the certificate?

  • a defined period of time in my schedule to share with specific people.

    I would like to share a period of time, given my calendar with people well nominated. Is this possible?

  • Baseline of connection sharing

    I have an application to LabVIEW 8.5 user interface.  The application connects to a database to retrieve and save information on the product images.  As the user draws the King on the image, I use a structure of the event to select, insert, or update

  • bar graph conspire

    Hi I have this table 2 d and I need to move to a xy graph and he discovers a bar plot... x will b the date and time and there will b data, please urgent help