No sound on Windows 7 installed on an iMac (SIGMATEL STAC 92XX C - Major HD) Audio

I have an imac with windows 7 installed. It's a clean install without bootcamp. There is no sound on the machine. The ID of the salesperson, I found that the unit is SIGMATEL STAC 92XX C-Major HD Audio. I tried to install 3 different drivers made for Dell with the same audio card. None of them work, saying the device is disconnected or found or not functional. Any solution to this?

Same story with the built in isight camera. I would be grateful if you can help solve these problems of driver for cross-platform hardware/software compatibility.

Thank you.

Sincerely,

Leveneur

I have an imac with windows 7 installed. It's a clean install without bootcamp. There is no sound on the machine. The ID of the salesperson, I found that the unit is SIGMATEL STAC 92XX C-Major HD Audio. I tried to install 3 different drivers made for Dell with the same audio card. None of them work, saying the device is disconnected or found or not functional. Any solution to this?

Same story with the built in isight camera. I would be grateful if you can help solve these problems of driver for cross-platform hardware/software compatibility.

Thank you.

Sincerely,

Leveneur

If you are using Windows on a Mac (if Parallels or Bootcamp) you must use a USB audio device for microphone input. I have not tested for output on speakers but a full duplex audio USB pod will probably cure the problem as well.

Tags: Windows

Drivers for XPS 400Dimension 9150

BIOS - BIOS

Description	Importance	Version	Published	Supported OS	Download
Dell Dimension system BIOS A07 Dell Dimension system BIOS A07 DXP051	Optional	A07	16/01/2007	BIOS

Audio - driver

Description	Importance	Version	Published	Supported OS	Download
SIGMATEL STAC 92XX C - Major HD Audio, v.6.10.0.5343, A02 SigmaTel STAC92XX C-Major HD Audio Driver	Recommended	6.10.0.5343	30/01/2007	Windows Vista 32-bit Windows Vista 64-bit

Chipset - driver

Description	Importance	Version	Published	Supported OS	Download
Intel Chipset Software Installation Utility, v.8.1.1.1010, A01 Software support for Intel Chipsets.	Recommended	8.1.1.1010	22/01/2007	Windows Vista 64-bit Windows Vista 32-bit

Find out all the details here

Click here for all drivers (including historical drivers)

Quick links

Equium A110-276: cannot install virtual sound for Windows Vista

When I'm on xp, I have a toshiba virtual sound. When I installed vista, I can not install toshiba virtual sound. It says "your computer does not support virtual sound. someone knows why? the toshiba virtual sound I install came from additional package from toshiba for vista.

If I understand you right you try to install Windows XP on Vista Home edition tool. Am I wrong?

After you have installed Windows XP pro, I can't hear all the sounds of Windows

Original title: I got a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

I had a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

Hello

Thanks for posting the question on Microsoft community forums. According to the description, you can not hear the sound after installing Windows XP. He would be grateful if you could answer a few questions to refine the question.

1. What is the brand and model of the computer?

2 have you installed the audio drivers for the computer?

3 have you checked the State of the audio device in Device Manager?

See the steps to check the State of the audio device in Device Manager.

a. click Start, point to settingsand then click Control Panel.

b. in Control Panel, double-click System.

c. click the Device Manager tab.

d. double-click on a device type, double-click audio for devices of this category.

e. double-click on a device to view its properties. In the device status box, click the driver tab and click Update driver.

Follow the given steps.

Method 1:

Run the fixit from Microsoft Fixit article and if that helps.

Diagnose and automatically repair audio playback problems:

http://support.Microsoft.com/mats/AudioPlayback/

Method 2:

I suggest to check the hardware, run the troubleshooter and try to update the drivers. You can follow the article:

No sound in Windows

http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Hope this information helps. Please reply with the status so that we can help you.

I have windows xp installed on my computer. I connect logitech speakers in my box, but I have no sound. they still do not work

I have windows xp installed on my computer. I plugged in my speakers logitech box and I know the speakers work as I went down my dad's computer and they were going when he had it. I don't know much about computers and I can't really afford to pay someone to look for me. I think there may be something wrong with my sound card, but as I said I don't know much about computers

If the PC has moved when it was given to you, make sure that the speakers are plugged into the correct audio device decision-making. IIRC it's the green plug. If they are USB, plug it into another USB port.

Re-post if it isn't that, giving also make, name and model n ° of your PC/computer laptop and similar details for your Logitech speakers. Also right click on my computer > properties > hardware > Device Manager > all yellow exclamation then your audio device? Any reference to an audio device (Realtek, Soundmax...?

See you soon,.

Jerry

No sound in Windows error no Audio output device is installed.

Original title: no audio after update of the web browser (Vista)

I recently updated my browser Windows 9 for Vista. Since that time, all the sounds disappeared from my laptop. The speaker icon in the lower right corner of my bed, "no Audio output device is installed". I tried several things, including advice on your Web site, (System Restore, etc.), but nothing has helped... What should I do next?

Hello

What are the troubleshooting steps you have tried?

I suggest you follow the steps mentioned below:

Method 1:

Follow the steps in the link and check if the problem persists:

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

Method 2:

If the previous step fails, follow the steps in the link:

http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

No sound in Windows Vista Media Player after you install updates to Windows Feb 2012

Help, please. Feb 2012 updated windows installed without crahing but now I have no sound in windows media player 11. I downloaded the new codecs to cnet, but which did not set me. More trouble again – UGH!

Hello

Are you able to hear the sound of the computer?

I suggest you follow the steps mentioned below:

Method 1:

Race he difficulty of the link and check if the problem persists:

http://support.Microsoft.com/mats/AudioPlayback/

Method 2:

If the step above is unable to check if Windows media player is not muted in the volume mixer. Follow these steps to check:

a. open Windows media player.

b. click on the volume icon in the taskbar.

c. click mixer.

d. in the list of applications, make sure that the volume icon is not silent for your Windows media player. If he is silent, then turn it back on.

e. check if the problem persists.

Hello. I have an emachine T1096 with Windows XP installed. I need to understand why the sound was suddenly released. Help, please!

I did everything in the help and support section. He worked one day, the next morning, when I turned on my computer it was outside.

Hello

1. have you you can all changes on the computer before this problem?

See the article below which might help you to fix this problem.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

Satellite A100 - no sound with Windows XP Pro SP3

Hello

I'm the reconstruction of a laptop Toshiba A100-PSAA9A-10U038 with a new installation of Windows XP Pro SP3.

At this point, I have not all sounds (Yes, the volume is set to the top).

As this is my first post I covered I hope that most of the bases as with SP3 and I installed all the updates available from Toshiba and Microsoft - well at least, I guess I have. I downloaded the latest updates from Realtek who advised in a general forum but no luck.

Device Manager tells me that there are problems with a "PCI Device" and a "unknown device", and I assume that one of these two is the culprit.

Any suggestions would be much appreciated.

Hi mate

I think that you have installed the driver of his evil.
See this page:
http://www.MyToshiba.com.au/support/notebooks/satellite/A100/psaa9a-10u038/download?OS=22

you will find all of the Win XP drivers for this model of laptop.
As you can see there are two different Realtek drivers:
V Realtek Audio Driver 5.10.0.5253
-Realtek ALC861 Audio Driver 5.10.0.5200

To my knowledge, you have the Realtek HD audio Manager.
But before install you the audio driver SP3 must be installed, it seems, that you did
However, the most recent audio Realtek driver can be downloaded from the Realtek page directly.
Select this check box, and then choose Manager Realtek HD audio for Win XP.

Should work.

Satellite Pro P300 - no sound on Windows 7

Hello world

I had a serious problem with my Satellite Pro P300. I have all the drivers for download on the website of toshiba installed but I have no sound same with headphones. When I am playing music the spectacle of the sound icon he is read but any sound. I checked on a lot of Web site, forum and tested several drivers, but the problem is still there.

Please help me before I go crazy with it.

Hi faridas,

I think that it s not easy to say and on Windows 7 I never had this problem, but maybe you need to turn the sound back on:
http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

In addition, check in Device Manager if the sound card is properly installed. Also make sure the BIOS version is up-to-date.

Last but not least check the Windows sound settings!

My I/O does not sound in Skype, but it gives sound in windows

Hello.

So I use a Zoom H4n as interface i/o, and the microphones gives me a sound in the audio menu in windows, I can also register using the registration of windows-app. The problem is with Skype, I find the right audio device in the menu, but there is no sound. Drivers, firmware and Skype verson are freshly installed.

Help please?

I just tried to use an external microphone via the Zoom, and that works very well. So might be a problem related non-Skype...

Tecra 9100 - loss of sound after Windows Update.

I just got my hands on a 9100 second hand and have been re - install XP Pro. I was going well and had everything except the card SD not working after downloading all the drivers concerned off Toshiba site.

Micorsofts update the site decided to download new drivers for the card his Yamaha, and now it says NO device.

I reinstalled the drivers from the toshiba site, but despite everything I do, it still shows no device.

Ive tried reinstalling the software Synth as well, but having said that I need to run the re-installation of synth program. But there is no directory on the drive for what Yamaha and no entry in the Add/Remove for yamaha synth window or in the start menu.

I'm at a loss where to go then, short from once again and re-installing the OS to the top, and it's a good day's work.

Is a cleanup utility exists then I can just redo the part of sound card?

Help please. :-(

Hello

It seems that there is a problem with his Yamaha card driver after the installation of the Microsoft Windows XP SP2.

Seems that you need to update the audio driver of Yamaha!

After a short investigation, I found this site:

[Do not install SP2 if you have a card his Yamaha AC - XG | http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]

Best regards

Problem with sound in Windows

In my control panel for speakers, work, Realtek Digital Output (RCA), to work. Realtek HDMI Ouput, working all drivers to check updates, all tested well, but I have no sound on my computer, I can not play music, or talking on Skype. Please help and thanks in advance.

[Moved from comments]

Hello

To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

1. what version of Windows is installed on the computer?

2 is the issue limited to Skype?

3A this works much earlier?

4 have have there been recent changes made on the computer before the show?

We can see the links and check.

No sound in Windows

Tips for solving common audio problems

Please get back to us with the information above to help you accordingly.

No sound in windows after Eula download and cannot defragment error not draggable

No matter what I tried to do research on my E - 310 Dell Deminition under his, it is blocked by this thing, and I have no idea what or where he comes. I can't delete it or if I can defragment my system and he at a stand still. I am still able to login. My firewall are all ok? What can I do? Kat Williams

OT: Microsoft Download "EULA" on my computer windows pro now, I have "no sound and cannot defragment not draggable error? Heelppp!

Hello

1. what operating system is installed on the computer?
2. What is the accurate and complete error you get when you try to remove or defragment?
3. What do you mean "she is blocked by this thing and I have no idea what or where he comes. I can't remove it '?
4 EULA which have you downloaded?
5. what you are trying to delete?

Method 1
For the problem with the sound I suggest you try the steps from the following link:

No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

Method 2
Step 1: I suggest to start the computer in safe mode and check if you can remove or defragment.

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

See also the suggestion of Halima S replied on April 15, 2010
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-defrag-computer/8cb77216-8c20-49A2-a2ab-0e76d442f2ba

No sound on Windows 7 installed on an iMac (SIGMATEL STAC 92XX C - Major HD) Audio

Similar Questions

Drivers for XPS 400Dimension 9150

BIOS - BIOS

Audio - driver

Chipset - driver

Maybe you are looking for