Question T540p Ultradock sound via HDMI & fwdphb03 do not launch

Similar Questions

• Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector?

  Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector? My projector has HDMI but no audio output. Thank you.

  You can set the audio output to the airplay speakers in settings on Apple TV

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Satellite P300: no sound via HDMI on HDTV

  Hi all

  I get video but no sound when I connect my laptop to my Toshiba HD TV.
  I looked at the settings, but they seem to be ok.

  Any help would be great.

  You must follow these steps if you connect a HD TV to the laptop:

  1. fix a TV to the laptop via HDMI, while both units are in a * "power" off * State.
  2. turn on your TV first, then the laptop.
  3. laptop should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.
  4 launch Sound (start (Windows logo)-> Control Panel-> hardware and sound-> Sound)
  5. on the playback tab, select "Peripheral digital output (S/PDIF)" and click on "Set as default"
  6. click on 'Apply' then 'OK' to close his
  7. the sounds played on the l should now also be heard on the TV (keys Fn + ESC or the volume dial can be used to cut the sound to the computer)

  _Please Note: _
  1. peripheral digital output (S/PDIF) installation default through Volume mixer does not output digital audio via HDMI.
  2 HD DVD-video can only be displayed on the LCD of the computer bulletin board or on a television connected to the output of HDMI port. HD DVD Video cannot be displayed on televisions connected to the S-Video port or an external display connected to the RGB connector.

  Hope this helps

• HP pavilion dv6 3131tx no sound via hdmi

  I met an audio problem that only started since this morning, but is very frustrating, I have my hp pavilion dv6 3131tx windows 7 Home premium, connected to my TV via hdmi, it worked perfectly until this morning where the audio stopped working through the TV, hdmi output disappeared in the sounds menu, I tried the following :

  reinstall and update the drivers audio, update display drivers and chipset drivers, try the different hdmi ports and cables (to make sure it wasn't a bad cable) as well several solutions in the forums, my problem is that the hdmi output does not appear in the menu sounds and cannot be selected as default device How can I get that back?

  Problem solved, high definition driver Amd was automatically disabled somehow he was reactivated by going to the Device Manager and the bottom right click on amd/driver high definition codec and pressing enable (note that there are 2 of them, a permit and a disabled person) also allow many of them and YAY dolby digital surround sound works again! After 2 days of hard to find an answer I did it myself >. >, but still having a problem where my ATI / AMD drivers will not be updated due to a conflict between the hp hardware and the ATI Radeon Hd 5650-. -.

• No sound on TV via HDMI on does not aspire V5 - 571P

  I connect my Aspire V5 - 571p sometimes to watch movies on TV via HDMI. For some reason I can't hear sound on TV any longer?

  searched through this forum, tested the most common things that are mentioned in this thread https://acer.custhelp.com/app/answers/detail/a_id/2484/kw/HDMI

  but still no sound. There is a sound unit shown and can't do everything other (that he watch is a standard unit, which means the speakers, works of speakers Realtek High Definition Audio)

  Help would be appreciated.

  I found the solution.

  Panel, configuration settings, add or remove hardware remove sound cards, restart the computer. Who helped me, hope it helps ohters similar problems.

• No sound via HDMI after upgrading to windows 7

  I upgraded a sony Vaio VGX-TP3Z-B from vista Home Premium to Windows 7. I got a LCD TV Sharp that the monitor is connected via HDMI everything worked perfectly before the upgrade, but after I can't get sound through the HDMI to the TV, I can plug the speakers into the PC, but the sound is not as good as the way to TV.

  On the settings of the sound output device (HDMI) theDigital is shon as not connected.

  I checked for updated drivers and those installed seems to be later and Sony have no support for upgrades to Windows 7.

  I'm really stuck and frustrated, I hate to be beaten, can you help me?

  Dave

  Hello
   
  You can try the steps below and check if the problem is resolved.
   
  (1) start Windows Media Player on any video file.
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right of the mouse, click on area of Windows Media Player (video)
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button
  (4) in the pop - uo-> "properties of the speaker" modal window select the audio device: => select "Digital Audio (HDMI) (2-high definition Audio Device)" (on the laptop)
  (5) save all window
  (6) close and restart Windows Media Player
  (7) connect the cable HDMI and swith on the TV for audio HDMI
  
  Now the works video + audio works perfectly on television.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound via HDMI connection in adobe elements 14 trial first

  In the trial version of first elements 14 that the sound is not exported to my TV with an HDMI connection, I hear the sound of my pc as if it was not connected via HDMI. I have downloaded powerdirector, this works the HDMI sound... Y at - it nothing to do with this... ?

  Thanks for any help.

  Popis

  What operating system is involved with your 14 items first?

  Configure your desktop computer is fixed via HDMI to the TV or laptop with TV game as a 2nd monitor in a workflow bi-ecrans?

  Although I realize that you say that the other program has no problem with the HDMI TV configuration, how you set display in place

  a. duplicate

  (b) extend

  c. show the desktop only on 1

  d. show desktop only on 2

  e. no dual monitor, you work with a single monitor for a desktop computer.

  Have you explored editing Audio/preferences/Menu material ASIO input and output settings tab?

  One of your connections are of the type "hub" or just a straight HDMI cable from the computer to the TV?

  Is - this problem in all areas of the sound source for the timeline of the first elements or just with the file (s) and or a Premiere Elements project?

  Please review and then we'll decide what then based on the details in your response.

  Thank you.

  RTA

  Add on... I have a laptop connected via HDMI to a smart TV. Duplicate is resolved. And, I have no problem with sound appear to come from TV... I have affect volume in reading first elements chronology of remote first elements or the TV Volume control adjust Volume/pallet/tab panel settings. Thorough in trying to use both randomly.

• Satellite R630 - no sound via HDMI

  Hello

  I can't find a way to get the sound through HDMI on my R630. I tried the audio properties in the Control Panel, but there is no option to set the audio by default to HDMI device as there was on my old machine.

  Any ideas?

  Thank you
  Mark

  Hey Buddy,

  I had the same problem but the solution is quiet easy: you must set HDMI as output by default sound settings in Windows.

  Simply check this section of the FAQ from Toshiba, in my case it worked:
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

• No sound via HDMI on TV

  There is, when I put my head hdmi to my computer to watch a movie I have no sound on my TV

  Start-> Control Panel-> Sound-> reading-> HDMI set as default. Must get the noise is going for you.

  See you soon

• No sound via hdmi

  Hello

  I have a hp dv9000 with hdmi output.  I signed up for Netflix and connected the laptop hdmi cable to our TV.  Use of IE, I started a film and the video is very good.  The sound of the film is coming through the speakers of the laptop, but not the tv.

  Curiously, the windows sound is coming through the tv speakers and not the laptop.

  How can I get the sound of the movie to play through the TV?

  Hello Bulverde,

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  1. click on the button 'Start '.

  2. click on "Control Panel."

  3. 'Control Panel Home' click 'hardware and sound '.

  4. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices".

  5. This will bring up a window titled "Sound".

  6. on the tab 'Read' it has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  7. it should now check this option box.

  8. the sound should play through your HDMI connections to the TV.

  You can also see the article that will give you more information on this.

  http://support.Microsoft.com/kb/953500

  You can also watch the thread below in which another user had same issues and try different possible steps listed:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/28691f82-610e-4F01-be2f-b2ced7cca645/

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• 32L1375D - no sound on HDMI using PC not connected

  My HDTV has been replaced by Toshiba (backlight went) the new tv is a 32L1375DB.
  Everything seems fine, except when I connect to my PC via HDMI I have no sound.

  I have check and out HDMI AMD is selected by default on my pc windows 7 (processor i5, 8 GB ram, AMD HD 5870 graphics card). But under supported formats says 0.

  Audio over HDMI works perfectly on old TV and nothing else on the system has changed. The xbox, which is also connected to the new TV works fine. I tried the HDMI cable from the Xbox with the tv and tried on the two hdmi ports on the TV with the same result, big no picture no sound.

  Someone else had this problem? Can someone give me advice on how to solve it?

  Sorry mate, but I guess that this issue has nothing to do with the Toshiba TV but your PC settings.
  Usually, you have to choose the HDMI (or digital) in the settings of your PC.
  Panel of-> sound-> the Read tab

  Here you will see all available devices. In order to get the sound through HDMI out you must choose this device as default.

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• No sound via HDMI port to tv

  Hi all, I know it was question about it in the net, but I can not toot'paste any info helpful for my situation.

  Please advise,

  I have a HP DV9700 laptop running Windows Vista SP1 and 32 bit OS.

  I'm reading of my machine videos through my LCD tv.

  My TV is a Visio 1080 p full HD HDMI compatible 40 "or close

  No matter what I play a video on my computer I can't get audio through my TV lights.

  Audio playback fine on my machine.

  I have read the discussions and tried what I could understand too without success.  It is at this point in front of me.

  My taskbar has only a: Realtek HD audio Manager icon

  When I go on to the Graphics Device Manager, everything I have is no other device NVIDEA Geforce 8600 M GS

  No matter what I go in I do not see any options or settings to speak of HDMI anywhere?

  I left the HDMI pluged and rebooted, still nothing

  There is no setting on the TV to HDMI or external speakers.  House of theatre people or a computer at stores not any use either.

  Is this true of HDMI audio and video.  I will not need a separate right audio cable!

  Help, please.

  worked on this path too long for such a seemingly simple problem...

  Hi all

  I just wanted you to know that my problem has been corrected.

  I know, hit me in the head, I would have had a...

  Sometimes the simplest things are overlooked (I should know better).

  I was not select RealTek Digital Output the spokesperson for "Default" to use.  So, it was still using the Realtek HD Audio internal speakers.

  I just did not realize that I had to choose 'set as default' in for the external speakers to work.

  After doing this all my concerns have been resolved.

  Everything works fine now.

  Sorry to sound like a newbie & thank you for your patience.

• (Redirected) Alienware x 51, cannot access bios/no sound via hdmi

  So, I've had this computer for a few months now and have no problem with is. last night I put to sleep and when I woke up there today there was no noise at all. I have a hook up to my TV with an hdmi cable. I have it configured this way since I got it. I came back with nothing sound. But sound would come via a usb headset. The last thing I did to try to fix it was initialize the bios menu, I went to advanced settings, and then embedded devices, then I changed the graphics by default auto «Idfx.» Something that I found on an Ant from a user with the same problem. Apparently, it worked for them. But I have still no sound through my t.v and now I can't access my bios. When I start my pc, it's just a black screen until the login screen. If I hit F2 at startup, it loads the bios but still finds me to a black screen.  I tried to retrace my steps in the bios to change the auto return option, but it's a little hard when you are running blind. I tried to restore "default settings" my bios but still once I do blind and nothing seems to work. I have windows 8 is installed if it changes anything. I need help me recover the ability to return in my bios and two solve the sound problem. Thanks to anyone who can help me

  Hello winter anxiety!

  First of all in order to return to the screen again, in that you can try to enter the BIOS and press F9, which will make go to its default settings, then press F10 to save and exit.

  And in regards to the Audio test to go to the playback devices and verify if the parameters are set up.