No sound when you try to listen to talksport don't live

Similar Questions

• No sound when you try to watch a movie

  Windows madia player

  Im trying to observe a movement an i have no sound

  Hi Boy bubba.

  (a) this only happens with this film?  You are able to hear the sound when you play other music files?

  (b) you get an error message?

  (c) don't you hear all the sounds of the computer?

  No sound in Microsoft Windows Media Player is often corrected by adjusting the volume at the bottom of the window settings. Move the left slider to the right will increase the volume, so all the way to the left the volume all the way down.

  Ensure that the speakers are not muted

  Bottom right on the task bar > click on the "speaker" icon > ensure that is not cut, if it's muted go ahead and reactivate it.

  Let us know if it works or if you need further assistance

  For more information, see the link below

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The playlist is saved as wpl but error message when you try to listen.

  Have the music files saved in my email as old skool play list.wpl. When I run the file and open it plays the first two songs and then I get the error message.

  "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "Once the message appears the file who played before at least 10 other files display a red circle and x to the left of the song.

  But if I scroll down and click play on another song he plays, but when I try to play the next song on the playlist again error message and the song which just play comes with the x and the red circle. Have tried this on multiple computers that are running Windows 7 and another that runs Windows XP even result. If the file is corrupted, it would play? I have over 500 songs on this playlist and he had already permitted to listen to me a few months ago.

  Hello

  ·         What operating system do you use?

  ·         You try to save the file to your post office and check if it works?

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:

  a. right click on the folder on the external drive and click Properties.
  (b) in the Properties window, click on Security tab.
  c. now, click Edit and then click Add.
  d. now, type everyone in the box and click OK.
  e. then check the full control box.
  f. click apply and then click OK.

  You can also try the mentioned below as follows:

  a. Click Start.
  b. go to the control panel.
  c. Select "SOUND".
  d. double-click speakers.
  e. click on the Advanced tab and then uncheck the enable audio enhancements.

  Kind regards

• Cannot add the find now is in the Tools menu when you try to install add to import Windows Live messages, contacts, etc.

  I want to import Windows Live 2011 messages, contacts, etc and tried to install the recommended add on. I downloaded and registered the add on by following the instructions, but when I went on the Tools menu, to add on the of are not there to complete the installation.

  Add what ons reports tools when you use the menu bar. Shortcuts universal to display hidden menu bars is alt or F10

  It looks like you use the button AppMenu (3 horizontal lines).
  I guess that you haven't noticed the Add-ons selection in the main menu when you have clicked on that.

• I have no sound when you try to play CD or youtube. My speakers are new and have worked before and my volume is high enough. What can I do to solve the problem, please?

  My computer has been repaired a month ago.  Its worked before but not after bringing the store.

  Hi Anne,.

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, we understand that there is no sound from the speakers to the computer.
  Let me go ahead and help you with the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. what version of the operating system is installed on the computer?
  4. do the sound problem only occur when playing a CD or watch videos of youtube?

  5. what web browser do you use for videos of youtube?
   
  I suggest for the link and follow the steps in the article following the operating system installed on the computer.
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Also see links:
   
  No sound playing an Audio CD in analog Mode on USB speakers

  http://support.Microsoft.com/kb/306706

   

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Problems with iPod touch: when you try to listen with headphones, there is an onimous "click" then nothing.  The battery is fully charged.

  My iPod touch is fully charged and I can listen through head phones while it's plugged in, but as soon as I unplug it, there is a loud 'click', and then it goes dead.

  Someone at - it similar experiences?  Suggestions?

  What dead?

  Sound?

  Entire iPod?

  Unplug what?

  Helmet?

  Disconnect the iPod to load source/computer?

• When you try to play Halo2, receive error message "live gaming on windows failed to initialize.

  Hi, I got downloaded halo 2 for windows vista, but when I go there to play it comes up with, "live gaming on windows initialization failed, maybe it's because an another live gaming application on windows (such as halo 2 dedicated server) runs on the same machine, otherwise reinstall the game can solve the problem" I reinstalled at least 5 times and as not worked I also made sure that the game halo 2 is the only program running. It is extremely annoying. Please help me fix.

  See you soon

  Shorty 13

  * original title - when I go on the game halo 2, it comes up with "live gaming on windows failed to initialize. Please help.*

  As it says in the wire by Debra, you must try the update of halo 2 and make sure that your firewall is not blocking halo 2 internet access.

  If none of those who work, it could be an underlying cause, like the actual CD you install halo 2 with being corrupt. If this is the case, you should find an .iso of the halo 2 CD and install from there.

• Layout error 0x800ccc79 when you try to send an attachment for Windows Live Mail.

  Solution to ship a small accessory.

  I tried to post a very small attachment with about 50 KB.  Had this error...

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server to "" settings, contact your e-mail service provider.

  Subject 'Test email for Koenig documents '.
  Server error: 555
  Server response: 555 5.5.2 Syntax error. a11sm10831668ibg.3
  Server: 'smtp.gmail.com. '
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 465
  Secure (SSL): Yes

  Windows 7

  Kaspersky Antivirus

  Using Windows Live Mail

  Thank you.

  1: Make sure that Kaspersky will not email, scan in or out.

  2: see if everything is set up the way it should be.

  Activation of POP in your Gmail account
  http://mail.Google.com/support/bin/answer.py?answer=13273

  How to configure Gmail in Windows Mail & Windows Live Mail
  http://mail.Google.com/support/bin/answer.py?answer=86383

  If you need help, please ask the experts in the Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Why is there no video and no sound in windows movie maker when you try to transfer a camcorder mini dv?

  I have a Canon ZR50MC and a HP Pavilion DV6628us laptop.  I am trying to transfer videos via a firewire cable, but there is no video or Director of windows.  When you try to save, it shows that if the band is running and it is actually being run in the camcorder but the screen in WMM is black with no sound at all.  Help, please!

  Perhaps the following would offer a few ideas:

  Windows Vista - video live Import from a DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-live-video-from-a-DV-camera

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Windows Vista - video import settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-import-settings-frequently-asked-questions

  Windows Vista - Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• No sound when you listen to XM through Windows Sidebar

  My Dell laptop has sound and works very well, HOWEVER, I am not able to hear any music when I'm listening to XM via Windows Sidebar. I know it is connected, but not all the sounds will play.

  Hi Srhtx,

  • You are able to get the sound when you use other gadgets in the sidebar?
  • Did you get the sound earlier on this computer on XM radio on the sidebar?

  I suggest to access XM Radio using Windows Media Player on your computer and check if you can hear the sound. To play in Windows Media player follow the steps below:

  a. open 'Windows Media Player'
  b. Select 'display '.
  c. Select "online stores".
  d. Select 'XM Satellite Radio' in the list of online stores and continue by entering your user name and password.

  If you are able to hear sound in Windows Media Player, you can contact support XM radio to check if you need to change the settings.

  Link to contact XM radio support:http://www.xmradio.com/help/index.xmc

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the photo in Windows Media Player.

  * Original title: Windows Media PLayer

  I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture.  Please see image attached.

  Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.

  I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again.  I tried many codecs packs and this still does not help.

  My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.

  Please can someone help?

  

  Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.

  After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.

  Note: Make sure that Windows is up-to-date.

• When I try to listen to mp3 in windows media 11.0.6002.18311 player I only hear noises of frying

  Hi team,

  When I try to listen to mp3 or watch videos in windows media 11.0.6002.18311 player I only hear static noises. In the past, I was able to listen properly to the mp3 format and to see all the videos with great sound quality, but now I can't.

  Can you please help me to fix it?

  Thanks in advance for your help!

  Kind regards

  Q...

  Hello

  1 during how long have you had the problem?
  2. don't you make changes to your computer before the problem?
  3. is the relevant question to the Windows Media Player?
  4. are you referring to files of video files and audio files from the hard drive or the media?

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  I suggest that reduce you the hardware acceleration on your computer and check if it helps.

  (a) open screen resolution by clicking on the Start button, click Control Panel, and then, under appearance and personalization, click adjust screen resolution.

  (b) click on Advanced settings, click the Troubleshooting tab, and then click change settings.

  Note that some video card drivers do not allow allows you to change the settings.

  (c) move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  Step 2:
  

  If the previous step fails, then I suggest that you manually download and install the updated drivers for the graphics card and the sound card on the computer by visiting the manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Satellite Pro 6000: no sound when you play the CD or the DVD-audio

  Hello

  I m pretty new to laptops and so I put t know much about them, this looks like a good place to come however from the answers. Well, my problem is that when you try to play the DVD or CD, even for those who rely on the laptop there is no sound. The speakers work because I ve checked, but if I wanted to play an audio Cd or a DVD in windows media how to activate the sound? Everything works great on my regular computer.

  I would be grateful for answers.

  Hello

  In Control Panel, you can find the sound and Audio devices. Here, you can change the settings to different controls. Check if the mute option on Audio CD control is not marked.

  Good bye

• No sound when you export the missing project like HD (AAC codec) video

  Hi there everyone!

  I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!

  Here's the scenario:

  MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)

  The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.

  A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»

  I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.

  Thanks in advance!

  I was FINALLY able to get 1080 p with its new output using the following parameters:

  

  I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).

  I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release.  I hope that they get it fixed!

• Error 5 c 20 when canon mx860 try executing maintenance or when you try to print, hear a clatter.

  Original title: my printer keeps making a clicking sound when I try to print sounds like the gears are not contagious

  I have a problem with my printer canon mx860 number model when I try to run the maintenance or print I hear a clicking sound and an error message pops up error 5 c 20 someone can help me with this

  Hello

  1. were you able to print before without any problem?

  2. did you of recent changes on the system?

  5 20 error means the logic board is defective, probably because he can't move the rollers and transport.

  You can try to reset the device when it is not working properly. If the device does not work properly or to clear the memory, reset a. on the Control Panel, press the button. (The display goes out.)
  Note: It may be necessary to unplug the power cord is pressing the ON button does not stop the printer.

  b. wait about ten seconds and then again press the button.

  c. wait that the unit has completed its cycling process before submitting another job request.
  Note: It may be necessary to unplug the power cord and try again if the steps above don't erase the mistake.

  For more information, please consult the following link:

  Canon PIXMA MX860 Support

  If you need help to solve the problem, you may need to contact Canon support.

  http://USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Hope this information is useful.